LEGRAND Plexo 0 697 93 User manual

Connected power outlet module
Surface mounting box with membrane
glands (2 gang)
2P+E power outlet
mechanism
Power outlet cover
Power outlet module cover
This pack is a connected accessory which requires you to buy and install the Plexo with
Netatmo connected starter pack first.
Pack contents
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can
lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be
opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities
and the rights to replacement and guarantees. Use only Legrand brand accessories.
LE11707AA
PlexoTM- Connected power outlet
0 697 93
x1
Connected power outlet
AND
Do not use: a connected switch (with dimmer option) to control a connected
power outlet or a traditional power outlet.
x1
or several
x1
Wireless switch Wireless switches 1gang or 2 gang
for all control points (not included
in this pack)
AND / OR
x1
or several
AND / OR
Before you start: wiring precautions
To control a power outlet, only use the products:
2
OFF
Remove the existing
power outlet
Make sure that the power is
o before continuingwith the
installation.
Necessary safety precautions
Install the power outlet and the connected power outlet module
Fix the box on the wall
3
The electrical protection must be 16 A
Install the power outlet and the connected power outlet module (cont.)
Install the membrane glands, the wires and fix the cover plate
4

Frequency bands: 2.4 - 2.4835 GHz
Power level: < 100 mW
Temperature usage : +5°C - +45°C
7 mm
L
L
N
N
2.5 mm2 rigid wire
(recommended)
16A - 230V~
3680W maxi
cos 0,8
Install the power outlet ans the connected power outlet module (cont.)
Wire the power outlet and its connected module
N (neutral) = blue
L (live) = any except blue and yellow/
green
(earth) = green/yellow
5
1/4
1/4
Install the power outlet and the connected power outlet module (cont.)
Install the power outlet and the connected power outlet module in the box
Install the power outlet cover
6
ON
Turn on the main power
Install the
connected power
outlet module
cover.
The connected power outlet
module light turns red
3 Power the wired connected power outlet
7
To add a connected product to your connected installation,
you should follow the instructions:
- in the user guide in your connected starter pack
- in the Legrand Home + Control application (Settings/Add a new product section)
- or consult the user manual on legrand.fr
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
www.legrand.fr
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these instructions
complies with directive 2014/53/EU.
The full text of the EU declaration of conformity
is available on the following website :
www.legrandoc.com