LEGRAND Mosaic User manual

MosaicTM
784 31
Offset infrared auxiliary control
LE01977AA_EN
Characteristics
Power supply 1 x 9 V, type 6 F 22
Range 5 m
- 5°
+ 40°
- 5° C to + 40° C

18
Connection
Green transmission indicator LED

19
Description
LEARN button
LEARN indicator
light
Control button
Key
The indicator light
is switched off
The indicator light blinking
slowly
The indicator light blinking
fast
The indicator light
flashing

20
Learning the scenario
Step 1: start the learning on the remote control



Press
LEARN
Press
LEARN
Press
LEARN
Step 2: on the receiver
Step 3: save the scenario on the remote control
Press the remote control button that will
control the scenario
Press the button to be associated with
the remote control
The indicator lights on all products go out (remote control
and receivers).
The scenario has been saved.

21
Modifying a scenario
 
 


Step 1: on the remote control: open the scenario
Press
LEARN
Press
LEARN
Press
LEARN
Step 2: modify the state of a scenario receiver
Step 3: save the scenario on the remote control
Press the control button
that pilots the scenario
To delete the product from the scenario,
go to Step 3
The indicator lights of all the products go out
(remote control and receivers).
The scenario has been saved.
Press
LEARN
The indicator lights of all the scenario
products blink
Press the control button that you
want to link
or
036 60/71

22
Cancelling a scenario
Delete a scenario linked to the control button on the remote control
Cancelling scenarios
Delete the state of a scenario actor on the remote control.


Modifying a scenario
Etape 1 : cancelling a scenario p. 22
Etape 2 : learning the scenario p. 20
784 30
Press
LEARN
Press the control button
and hold for 10 secs.
The scenario is deleted
5 secs
Press
LEARN
Press LEARN
and hold for 10 secs
5 secs
Product goes back to factory
configuration.

23
Operation
> 2 s
> 2 s
036 60/71 784 30
AC
D
B

24
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician. Incorrect installation and
use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Le-
grand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised
opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.