Leica Geosystems ScanStation P40 User manual

Leica ScanStation
P40/P30
Quick Guide
Version 1.0
English

2
ScanStation P40/P30, Important Information about your Instrument
1 Important Information about your Instrument
Read and follow the User Manual on the accompanying USB card before using the
product.
Keep for future reference!
Intended use • Measuring horizontal and vertical angles.
• Measuring distances.
• Scanning objects.
• Capturing and recording images.
• Recording measurements.
• Computing with software.
• Remote control of product.
• Data communication with external appliances.

ScanStation P40/P30, Important Information about your Instrument 3
Laser products The ScanStation P40/P30 instrument contains the following laser products:
The classification is in accordance with IEC 60825-1 (2014-05).
Laser product Laser class
EDM (Electronic Distance Measurement) module Class 1
Laser plummet Class 1

4
ScanStation P40/P30, Important Information about your Instrument
Locations of laser
apertures
The product must not be disposed with household waste.
a) Laser beam
b) Laser beam (Laser
plummet)
c) Exit for laser beam
(Laser plummet)
008030_001
a
bc

ScanStation P40/P30, Important Information about your Instrument 5
Conformity to
national regula-
tions
• FCC Part 15 (applicable in US)
• Hereby, Leica Geosystems AG, declares that the product ScanStation P40/P30 is
in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC. The declaration of conformity can be consulted at
http://www.leica-geosystems.com/ce.
Class 1 equipment according European Directive 1999/5/EC
(R&TTE) can be placed on the market and be put into service
without restrictions in any EEA member state.
• The conformity for countries with other national regulations not covered by the
FCC part 15 or European directive 1999/5/EC has to be approved prior to use and
operation.
• Japanese Radio Law and Japanese Telecommunications Business Law Compliance.
– This device is granted pursuant to the Japanese Radio Law and the Japanese
Telecommunications Business Law.
– This device should not be modified (otherwise the granted designation
number will become invalid).

6
ScanStation P40/P30, Instrument Components
2 Instrument Components
Components of the
ScanStation
P40/P30
a) Antenna
b) Removable handle
c) Rotating mirror (laser and
camera aperture)
d) Battery compartment B
e) Circular level
f) Socket for power supply,
5 pin female with blue colour
ring
g) ON/OFF button
h) USB socket
i) Loudspeaker
j) Stylus
k) Touchscreen
l) Battery compartment A
m) Ethernet socket, 8 pin female
with grey colour ring
007863_001
a
b
c
d
e
f
g
h
i
j
k
l
m

ScanStation P40/P30, Technical Data 7
3 Technical Data
Environmental
specifications
ScanStation
P40/P30
Temperature range:
Protection against water, dust and sand:
Humidity:
Type Operating temperature [°C] Storage temperature [°C]
Instrument -20 to +50 -40 to +70
AC-power supply 0 to +40 -25 to +65
Type Protection
Instrument IP54 (IEC 60529)
Dust protected
Protection against splashing water from any direction
Type Protection
Instrument Max 95 % non condensing

8
ScanStation P40/P30, Care and Transport
4 Care and Transport
Care and transport • Carry the product in its original container or carry the tripod with its legs splayed
across your shoulder, to protect the product against shock and vibration.
• Periodically carry out test measurements and perform the field adjustments indi-
cated in the User Manual, particularly after the product has been dropped, stored
for long periods or transported.

ScanStation P40/P30, Operation 9
5 Operation
The battery must be charged before using it for the first time.
Turning on and off
the instrument
2s > ON
2s > OFF
008031_001
1
2
3
4
5

10
ScanStation P40/P30, EC Declaration of Conformity
6 EC Declaration of Conformity
EC Declaration of
Conformity
This corresponds to EN ISO/IEC 17050-1.
We, Leica Geosystems AG, CH-9435 Heerbrugg (Switzerland), declare under our
sole responsibility that the product(s) ScanStation P40/P30, following the provision
of Directive(s)
•2006/42/EC Machinery (MD)
•2004/108/EC Electromagnetic compatibility (EMC)
•1999/5/EC Radio and telecommunications terminal equipment (RTTE) (in
accordance with annex II / III)
•2011/65/EU Restriction of hazardous substances (RoHS)
to which this declaration relates, is in compliance with the following standards:
•EN 55022:2010
•IEC 60825-1:2014
•EN 61000-6-1:2007
•EN 61000-6-3:2007 + A1:2011
•EN 300328 V1.8.1
•EN 301 489-1 V1.9.2:2011
•EN 301 489-17 V2.2.1:2012
Leica Geosystems AG

ScanStation P40/P30, EC Declaration of Conformity 11
For a signed version and translations into the official EU languages please
refer to: http://www.leica-geosystems.com/ce

Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Switzerland
Phone [phone]
www.leica-geosystems.com
827778-1.0.0en
Original text
Printed in Switzerland
© 2015 Leica Geosystems AG, Heerbrugg, Switzerland