Leica Nova MS60 User manual

Leica MS60/TS60
Quick Guide
Version 1.0

de
en
fr
es
it
pt
nl
da
no
sv
fi
et
lv
lt

Leica MS60/TS60
Quick Guide
Version 1.0
English

2
MS60/TS60, Important Information about your Instrument
en
1 Important Information about your Instrument
Read and follow the User Manual on the accompanying USB card before using the
product.
• This Quick Start Guide contains first use directions as well as initial, basic instruc-
tions for setting up the product and operating it.
• Keep all documentation for future reference!
Intended use • Measuring horizontal and vertical angles.
• Measuring distances.
• Recording measurements.
• Capturing and recording images.
• Automatic target search, recognition and -tracking.
• Visualising the aiming direction and vertical axis.
• Remote control of product.
• Data communication with external appliances.
• Measuring raw data and computing coordinates using carrier phase and code
signal from GNSS satellites.
• Recording GNSS and point related data.
• Computing with software.

MS60/TS60, Important Information about your Instrument 3
en
Laser products The MS60/TS60 instrument contains the following laser products:
• The classification for the EDM, Autofocus, ATRplus, PS and Laser plummet is in
accordance with IEC 60825-1 (2014-05).
• The classification for the EGL is in accordance with IEC 62471 (2006-07).
Laser product Laser class
EDM (Electronic Distance Measurement) module
• measurements with reflectors Class 1
• measurements without reflectors Class 3R
Autofocus (in certain focussing modes) Class 1
ATRplus (Automatic Target Aiming) Class 1
PS (PowerSearch) Class 1
EGL (Electronic Guide Light) Exempt Group
Laser plummet Class 2

4
MS60/TS60, Important Information about your Instrument
en
CAUTION From a safety perspective, class 3R laser products should be treated as potentially
hazardous.
Precautions:
1) Prevent direct eye exposure to the beam.
2) Do not direct the beam at other people.
CAUTION From a safety perspective, class 2 laser products are not inherently safe for the eyes.
Precautions:
1) Avoid staring into the beam or viewing it through optical instruments.
2) Avoid pointing the beam at other people or at animals.
Labelling
Laser beam (EDM)
008674_001

MS60/TS60, Important Information about your Instrument 5
en
Locations of laser
apertures
The product must not be disposed with household waste.
a) LED beam red (EGL)
b) LED beam yellow (EGL)
c) Laser beam (PS)
d) Laser beam (EDM,
ATRplus)
e) Laser beam (Laser
plummet)
f) Exit for laser beam
(Laser plummet)
008562_001
e
a
b
c
d
f

6
MS60/TS60, Important Information about your Instrument
en
Conformity to
national regula-
tions
• FCC Part 15 (applicable in US)
• Hereby, Leica Geosystems AG, declares that the product MS60/TS60 is in compli-
ance with the essential requirements and other relevant provisions of Directive
1999/5/EC and other applicable European Directives. The declaration of
conformity may be consulted at http://www.leica-geosystems.com/ce.
Class 1 equipment according European Directive 1999/5/EC (R&TTE)
can be placed on the market and be put into service without restric-
tions in any EU Member state.
• The conformity for countries with other national regulations not covered by the
FCC part 15 or European directive 1999/5/EC has to be approved prior to use and
operation.
• Japanese Radio Law and Japanese Telecommunications Business Law Compliance.
– This device is granted pursuant to the Japanese Radio Law and the Japanese
Telecommunications Business Law.
– This device should not be modified (otherwise the granted designation
number will become invalid).