Leica TPS1200 series User manual

Leica TPS1200
TPS12_31
Setup tripod at user height
Attach tribach
Centre bubble on tribach using
black foot screws
Attach instrument
Lock in
To turn on
Press PROG for 2 secs
Level:
Use black foot screws to centre
small circle
When centered press F1 (CONT)
Main Menu:
Press PROG to view Program
Menu
Programs Menu:
PgDn to Athletics Measurements
Press F1 (CONT)
Athletics Measurements:
Select Horizontal Jumps or
Throwing Events
Press F1 (CONT)
Throwing Events:
Use arrows to select event
Press F1 (CONT)
Event Menu:
Use arrows to select Measure
Centre Point
Press F1 (CONT)
Circle Centre:
Locate prism at centre of circle (8m
mark for javelin)
Press F2 (DIST)
Press F3 (STORE)
Press F4 (DONE) only enabled
after valid distance is stored
Event Menu:
Use arrows to select Measure
throw
Press F1 (CONT)
To measure a throw
Locate prism
Press F2 (DIST)
Read Event Distance
Throwing Events
✗✓

Horizontal Jumps:
Select Measure foul line
Press F1 (CONT)
Measure foul: Point 1
Locate prism at one end of zero line
F2 (DIST)
F1 (NEXT)
Measure foul: Point 2
Locate prism at other end of zero line
F2 (DIST)
F1 (NEXT)
Horizontal Jumps:
Select Measure jumps
Press F1 (CONT)
To measure a jump
Locate prism
Press F2 (CONT)
Read Distance Jumped
Horizontal Jumps
To change event:
Press ESC
‘Do you want to exit without storing
measurement’
Press F6 (YES)
Press ESC
Throwing Events or Horizontal
Jumps
Press ESC
Athletics Measurements
To Turn O:
Press ESC until return to Main Menu
Press USER & PROG
(must be simultaneously)
Turn instrument o?
F6 (YES)
F4 (NO)
If a dierent message or menu
appears press ESC to return to Main
Menu
Note:
The Leica TPS 1200
does not have a
SLEEP mode