Leica TCR307 User manual

Settings on Leica TCR307 9/12/2011
Page 1 of 6
Main Screen
Press [SHIFT] then [PROG] and you will see the following screen:
Highlight All Setting and press [ENTER] which will display the following:

Settings on Leica TCR307 9/12/2011
Page 2 of 6
Following images will be based on the items shown in the image above. If you highlight the item
and press the [ENTER] button, it will take you to the corresponding screen. These screens are
shown below.
SYSTEM SETTING
Data Output should be set to RS-232

Settings on Leica TCR307 9/12/2011
Page 3 of 6
ANGLE SETTING
Set Tilt Corr. to “2 Axis”
Set Hz. Collim. to “On”
UNIT SETTING

Settings on Leica TCR307 9/12/2011
Page 4 of 6
EDM SETTING
<ppm> option shown below.

Settings on Leica TCR307 9/12/2011
Page 5 of 6
COMMUNICATION
DATE AND TIME

Settings on Leica TCR307 9/12/2011
Page 6 of 6
Open FieldGenius or EVR, open a project and navigate to Menu Home | Settings | Instrument
Selection.
Depending on the type of instrument you are
connecting with select Total Station, GPS Rover
or GPS Reference (Base)
Pic Add, type a name for the profile you are
creating and pic Save:
Pic Edit and configure your Profile with the
settings that follow.