Leica LLD 2 User manual

Line Laser Detector
LLD 2

Leica LLD 2 758835 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
1
Technical Data
All rights reserved for changes (on drawings,
descriptions and technical data).
Safety instructions
The person responsible for the instrument must
ensure that all users understand these directions
and adhere to them.
Symbols used
The symbols used have the following meanings
WARNING:
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, will result in
death or serious injury.
CAUTION:
Indicates a potentially hazardous situation or an
unintended use which,if not avoided, may result
in minor injury and/or appreciable material, finan-
cial and enviromental damage.
!Important paragraphs which must be
adhered to in practice as they enabled the
product to be used in a technically correct and
efficient manner.
Areas of responsibility
Responsibilities of the manufacturer of the orig-
inal equipment Leica Geosystems AG,
CH-9435 Heerbrugg (for short Leica Geosystems):
Accuracy ± 1 mm
Window reception
width 20 mm
Power supply DC =9V alkaline
batterie
Auto power off after 10 min. with no
signal detected
Operation time continuous operation
for approx. 15 hours
Operation temperature -10 °C to 50 °C
Dimension (L x W x H) 150 x 50 x 26 mm
Water and dust
protected IP 54
Weight (with battery) 230 g

D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
2Leica LLD2 758835 gb
Leica Geosystems is responsible for supplying the
product, including the User Manual in a
completely safe condition.
Leica Geosystems is not responsible for third
party accessories.
Responsibilities of the person in charge of
the instrument:
The person in charge of the instrument has the
following duties:
• To understand the safety instructions on the
product and the instructions in the User
Manual.
• To be familiar with local safety regulations
relating to accident prevention.
Hazards in use
CAUTION:
Flat batteries must not be disposed of
with household waste.Care for the envi-
ronment and take them to the collec-
tion points provided in accordance with
national or local regulations.
The product must not be disposed of with the
household waste.
Dispose of the product appropriately in accor-
dance with the national regulations in
force in your country. Always prevent access to
the product by unauthorized personnel.
Product specific treatment and waste manage-
ment information can be downloaded from the
Leica Geosystems home page at
http://www.leica-geosystems.com/treatment
or received from the Leica Geosystems dealer.
Electromagnetic Compatibility
(EMC)
WARNING:
The Leica LLD 2 conforms to the most stringent
requirements of the relevant standards and regu-
lations. Yet, the possibility of it causing interfer-
ence in other devices cannot be totally excluded.

Leica Geosystems AG
CH-9435 Heerbrugg
(Switzerland)
www.disto.com
Leica Geosystems AG, Heerbrugg,
Switzerland has been certified as
being equipped with a quality
system which meets the Interna-
tional Standards of Quality Management and
Quality Systems (ISO standard 9001) and Envi-
ronmental Management Systems (ISO standard
14001).
Total Quality Management - Our commitment to
total customer satisfaction. Ask your local Leica
Geosystems agent for more information about
our TQM program.
Copyright Leica Geosystems AG, Heerbrugg,
Switzerland 2007
Translation of original text (758835)