Leitner PREMIUM PLUS User manual

1
PREMIUM PLUS HEADSETS

2
CONTENTS
Controls 4
Indicator Lights 5
Charging Base 6
FocusLight 7
Computer 9
Telephone without a headset jack 11
Cell phone or tablet 12
Electronic hookswitch 12
Remote handset lifter 13
Setting up with your...
Getting to know your...
Audio signals 8
Telephone with a headset jack 11

CONTENTS
Make a call on your desk phone 14
Answer a call on your desk phone 15
Use UniBase® Technology 16
Adjust volume & mute 17
Turn on call control 18
Pair a secondary headset 19
Health and Safety Instructions 24
Troubleshooting & Frequently Asked Questions 22
How to...
Activate auto-on 18
Charge a secondary headset 20
Pair a new primary headset 21

4
Speaker Volume Up & Mute
Speaker Volume Down & Mute
FocusLight
Headset ON/OFF
Battery
Battery Door
GETTING TO KNOW YOUR
HEADSET CONTROLS
Headset
Charging Base
Lithium-Ion Battery
Battery Door
8.5v AC Adapter
RJ-9 Phone Cord
Type C-to-A USB Cord
WHAT’S IN
THE BOX
A
B
C
D
E
F
A
B
C
D
E
F

5
GETTING TO KNOW YOUR
INDICATOR LIGHTS
*LH670 & LH675 models only. Bluetooth Status
lights up when your headset is on and is connect-
ed to a Bluetooth Device.
DEVICE LIGHTS
100% Battery Life
75% Battery Life
50% Battery Life
25% Battery Life
Computer Mode
Telephone Mode
Bluetooth Mode*
Bluetooth Status*

6*LH670 & LH675 models only.
Battery Charge Level
Computer Mode
Bluetooth Mode*
Telephone Mode Button
Bluetooth Status*
Charging Cradle
USB Connector Port
Power Port
AUX Port
Telephone Connector Port
Handset Connector Port
RHL/DHSG Switch
Compatibility Switch
Microphone Volume Up/Down
GETTING TO KNOW YOUR
CHARGING BASE
C
B
A
C
E
F
I
K
L
A B C D E
F
GH I J K
L
J
M
N
D
G
H
M
N

7
GETTING TO KNOW YOUR
FOCUSLIGHT
*Your base will only flash if you
have a handset lifter or other
remote answering device
Solid Flashing
On a call
Ringing*
Muted
Headset and base pairing
Headset battery below 15%
(only headset will flash)
Headset and base not paired

8
GETTING TO KNOW YOUR
AUDIO SIGNALS
SOUND
Ringtone
1 click
1 chime
2 beeps (5 min repeat)
1 beep
Double tone
Triple tone
Incoming desk phone call
Volume up/down
Volume max/min reached
Mute is on
Mute is off
UniBase deactivated
UniBase activated
WHAT IT MEANS
When you walk out of range, you'll hear warning beeps in the headset. If
the headset disconnects, the call will not drop. The headset will automatically
reconnect when you are back in range.
NOTE: If you do not move back in range within 5 minutes, the call will disconnect.
2 beeps (repeating) Out of range
2 beeps (60 sec repeat) Low Battery (≤30 min remaining)

9
SETTING UP WITH YOUR
COMPUTER
1Plug the power adapter into the power port on the charging base.
2Use the included USB cable to connect your computer to the USB port .
3If your computer doesn't recognize the device after a minute, go to your sound
settings and select "Leitner Headset" as both your default microphone and default
speakers.
A
4Place your headset on the charging base (we recommend charging for at least 4
hours before first use).
B
AB

10
SETTING UP YOUR
TELEPHONE WITH A HEADSET JACK
Plug the power adapter into the power
port on the charging base.
1
If you're using a Cisco phone, set
your compatibility switch to 4.
Otherwise, make sure it's set to 1.
4
If your desk phone has a headset button and a RJ9 headset jack on
the back, you can connect through there, here's how!
A
2Plug the included phone cord into the
green telephone connector port on
the back of the charging base.
B
3Plug the other end of the phone cord
into the headset jack on the back of
your desk phone.
Place your headset on the charging
base (we recommend charging for at
least 4 hours before first use).
5
C
A B
C