LEMI VERSUS 1M User manual
VERSUS
INSTRUCTION FOR USE ............................................................
ISTRUZIONI PER L’USO .............................................................
NOTICE D’UTILISATION .............................................................
BEDIENUNGSANLEITUNG ........................................................
pag. 3
pag. 17
pag. 31
seite. 45
2
Congratulaon for having chosen an equipment LEMI produced by Brusaferri & C.
This table has been designed and built using state of the art technologies and processes to guarantee
Complimen per aver scelto un’arezzatura LEMI prodoa da Brusaferri & C.
Félicitaons d’avoir choisi un équipement fabriqué par Brusaferri & C.
Herzlichen Glückwunsch für eine Ausrüstung LEMI erzeugten von Brusaferri & C. gewählt zu haben.
EN
IT
FR
DE
3
INTRODUCTION
TRANSPORT AND INSTALLATION
ENVIRONMENTAL WORKING CONDITIONS AND STORAGE
PRELIMINARY CHECKS
DESCRIPTION OF THE TABLE
OPTIONS ON DEMAND
INSTRUCTION FOR USE
USE OF THE TABLE
MAINTENANCE
NOTICE TO OPERATORS AND RESIDUAL RISKS
SPARE PARTS
DISMANTLE
DISPOSAL OF OBSOLETE EQUIPMENT
DIMENSION
pag. 4
pag. 5
pag. 7
pag. 8
pag. 8
pag. 9
pag. 11
pag. 13
pag. 13
pag. 15
pag. 15
pag. 15
pag. 15
pag. 16
EN- INSTRUCTION FOR USE
1.
9.
5.
13.
3.
11.
7.
2.
10.
6.
4.
12.
8.
4
1.2. Preservaon of the manual
1.1. Use purpose
1. INTRODUCTION
WARNING! It is forbidden any use of the table other than that described in this ma-
nual. Brusaferri & C. declines any responsibility for malfuncons or damages to per-
sons or property due to uses other than those specied in this manual. The table
should be used only by personnel who are informed about the use mode, operaon
and its safety equipment.
WARNING! Please read this operaon manual before using the table. Anyone who uses
the table should be properly informed on the parts of this manual relevant to the ope-
raons to be performed.
5
2.1. Handling and removal from the packaging
2.2. Flooring
2.3. Lighng
2.4. Posioning
DIMENSIONS maress thickness
WARNING! It is strictly forbidden to remove the table by liing it from the top (mat-
tress).
WARNING! Do not use knives or box cuers to open the box so as not to risk dama-
ging the table and in parcular the pudding.
2. TRANSPORT AND INSTALLATION
Comfort= 9 cm Extra Comfort= 12 cm So= 15 cm
6
2.5. Power supply
2.6. Connecons
The power supply must be supplied to the unit by a line:
Voltage
Frequency
DIMENSIONS maress width
S= 74 cm M= 82 cm XL= 90 cm
7
WARNING! It is strongly recommended to insert the plug into a single outlet exclu-
sively reserved to the device. We do not recommend the use of mulple sockets
(power strip), adopters and patch cords.
The cable must not be bent.
WARNING! The table was not designed to work in environments with explosive at-
mospheres, in the presence of ne dust or corrosive gases, in the presence of acids,
corrosive agents, salt; it is also not suitable for operaon in the presence of ionizing
and non-ionizing radiaon (X-rays, laser, microwaves, ultraviolet rays).
WARNING! Do not expose the table to an excessively humid environment. If the
table gets wet, remove the plug from the outlet and have it checked by an Authori-
zed Service Centre.
STORAGE! For the correct funconing of the electrical equipment the storage of the
table must be at a temperature between -25° C and +55° C, and only for short periods
not exceeding 24 hours, to +70°C.
The table has no special requirements for storage, provided that it takes place in
a closed and dry rooms; this condion should also be ensured during all phases of
transport.
3. ENVIRONMENTAL WORKING
CONDITIONS AND STORAGE
8
4. PRELIMINARY CHECK
5. DESCRIPTION OF THE TABLE
Seat Legs
Adjustable feetEasy Move handle
Wooden base with
adjustable height
Lever for arm rest
Adjustable
arm rests
Adjustable head with
hole and hole cover Back
Predisposion for
roll holder
9
6. OPTION ON DEMAND
6.1. Heang
OFF =
ON =
LOW =
HIGH =
2H =
6.3. Wireless pedal (without cable)
ATTENTION! It is absolutely necessary TURN OFF THE HEATING (OFF) WHEN THE TABLE
IS NOT USED AND AT THE END OF EACH WORKING DAY.
6.2. Remote hand control
10
6.4. Kit Sound
6.6. Bluetooth Sound kit
6.6. Kit Chromo
6.7. Kit Aroma SPA
6.8. Easy Move
6.9. LED Lamp
11
7.1. Operator
7. INSTRUCTION FOR USE
WARNING! During the funconing of the table the operator should always remain
in the vicinity of the controls; it is forbidden to leave the table unaended during its
operaon.
Operators should pay aenon to avoid creang potenally dangerous situaons for
their own or other’s safety.
All the people who work on the table must be properly trained on the correct methods
of work and informed about its proper funconing. They also need to be aware of the
parts of this documentaon relevant to their work.
7.2. Use of maress
7.3. Controls
PEDAL WITH CABLE
2
1
4
3
6
5
8
7
END
AUT
Pedal 1:
Pedal 2:
Pedal 3:
Pedal 4:
Pedal 5:
Pedal 6:
Pedal 7:
Pedal 8:
Pedal AUT:
Pedal END:
12
7.4. AUT Operaon
7.5. Adjustment of the head
7.6. Adjustment of the arm rests
1- descent of the table
2- waing of about 20 seconds
3- descent of lt (seat/legs)
4- descent of the back
Buon A:
Buon A1: descent of the table
Buon B:
Buon B1:
Buon C:
Buon C1:
Buon D:
Buon D1:
Buon AUT:
Buon END:
HAND REMOTE CONTROL
A A1
B B1
C C1
D D1
AUT END
13
7.7. Adjustment of the leg
8. USE OF THE TABLE
9. MAINTENANCE
WARNING! Stretch out on the table always sing properly in
the central part of the seat.
Do not sit or lean on the side of the feet or of the head.
WARNING! The limbs of the paent must always be on the table. The operator must
always inform the paent when he moves the table.
WARNING! Be careful to make sure that the table or its electrical parts are not wet
and that liquids become not stagnant on the table itself; immediately wipe up any li-
quids – including physiological liquids of the paent – which may end up on the table.
To avoid shock hazard, do not connect or disconnect the power plug with wet hands.
Do not use the table barefoot.
WARNING! All intervenons on the table must be carried out by competent and trai-
ned personnel on the methods to operate correctly and safety.
Do not make any acon on the table moving, and always check that the plug con-
necng to power supply is disconnected; bring the power plug next to you during the
execuon of the intervenon on the table so you can check at any me the actual
separaon.
14
9.1. General Checks
9.2. Extraordinary Maintenance
9.3. Authorized Personnel
9.4. Cleaning
WARNING! Do not use the table if any component is found to be not perfectly intact
or in service.
In this case, put the table out of service by disconnecng the power plug immediately
and contact an Authorized Service Centre.
WARNING! Any form of warranty expires if intervenons are carried out on the table
by someone not authorized by Brusaferri & C.
15
WARNING! Be careful not to spray liquids on the electrical equipmen-
ts, pedal/hand remote control strip and on the protecons of the table.
You must follow the handling direcons given in the safety data sheets of the deter-
gents used.
WARNING! Do not bring the limbs near the elements in movements and in parcular
to the points described above.
WARNING! Any form of warranty expires if they are used spare parts other than those
originally ed.
10. NOTICE TO OPERATORS AND RESIDUAL RISKS
11. SPARE PARTS
12. DISMANTLE
13. DISPOSAL OF OBSOLETE EQUIPMENT
16
IMPORTANT NOTICE
HOW TO CLEAN THE ABS PLASTIC COVERING
DIMENSION
Dimensions in cm and inches
acids
Rev. 01-02/'14
82 cm
32,2"
[ 74 cm / 29 inch ] <--> [ 90 cm / 35 inch ]
62 cm
24,4"H MIN
88 cm
34,6"H MAX
12 cm
4,7"
61 cm
24,1"
43 cm
16,9"
202 cm
79,5"
82 cm
32,3"
202 cm
79,5"
Rev. 01-02/'14
82 cm
32,2"
[ 74 cm / 29 inch ] <--> [ 90 cm / 35 inch ]
62 cm
24,4"H MIN
88 cm
34,6"H MAX
12 cm
4,7"
61 cm
24,1"
43 cm
16,9"
202 cm
79,5"
82 cm
32,3"
202 cm
79,5"
17
INTRODUZIONE
TRASPORTO E INSTALLAZIONE
CONDIZIONI DI FUNZIONAMENTO E IMMAGAZZINAMENTO
VERIFICHE PRELIMINARI
DESCRIZIONE DEL LETTO
ACCESSORI A RICHIESTA
MODALITA’ D’USO
UTILIZZO DEL LETTINO
MANUTENZIONE
AVVERTENZE AGLI OPERATORI E RISCHI RESIDUI
PEZZI DI RICAMBIO
MESSA FUORI SERVIZIO
SMALTIMENTO APPARECCHIATURE OBSOLETE
DIMENSIONE
pag. 18
pag. 19
pag. 21
pag. 22
pag. 22
pag. 23
pag. 25
pag. 27
pag. 27
pag. 29
pag. 29
pag. 29
pag. 29
pag. 30
IT- INDICE
1.
9.
5.
13.
3.
11.
7.
2.
10.
6.
4.
12.
8.
18
1.2. Conservazione del manuale
1.1. Desnazione d’uso
1. INTRODUZIONE
ATTENZIONE! È vietato ogni ulizzo del leno diverso da quello descrio nel presen-
te manuale. Brusaferri & C. declina ogni responsabilità per malfunzionamen o dan-
neggiamen a persone o cose dovute ad ulizzi diversi da quelli indica nel presente
manuale. Il leno deve essere ulizzato solo da personale informato delle modalità
di ulizzo, del funzionamento e delle sue dotazioni di sicurezza.
ATTENZIONE! Leggere aentamente il presente manuale operavo prima di ulizza-
re il leno. Chiunque ulizzi il leno deve essere adeguatamente informato sulle
par del presente manuale operavo rilevan per le operazioni che dovrà svolgere.
19
2.1. Movimentazione e rimozione dall’imballo
2.2. Pavimentazione
2.3. Illuminazione
2.4. Posizionamento
DIMENSIONE spessore materasso
ATTENZIONE! È severamente vietato rimuovere il leno sollevandolo dalla parte
superiore (materasso).
ATTENZIONE! Non ulizzare coltelli o taglierini per aprire la scatola in modo da non
rischiare di danneggiare il leno ed in parcolare l’imbotura.
2. TRASPORTO E INSTALLAZIONE
Comfort= 9 cm Extra Comfort= 12 cm So= 15 cm
20
2.5. Alimentazione elerica
2.6. Collegamen
L’alimentazione elerica deve essere fornita all’apparecchio da una linea:
Voltaggio
DIMENSIONE larghezza materasso
S= 74 cm M= 82 cm XL= 90 cm
Table of contents
Languages:
Other LEMI Spa Accessories manuals
Popular Spa Accessories manuals by other brands
Gecko
Gecko in.k330 Tech book
Del ozone
Del ozone ZO-200 Installation & operation manual
Leisure Concepts
Leisure Concepts Covermate Vanish installation instructions
HYDUR
HYDUR Grandi Square user manual
GHARiENi
GHARiENi MO 1 instruction manual
Leisure Concepts
Leisure Concepts Smartop SwimSpaVanish XL installation instructions
