LENCO XEMIO-200 User manual

XEMIO-200USER MANUAL
1
Special Features
Elegantappearance and easyto use.
Multi-Code Player - Supporting MP1, MP2, MP3, WMA, formats.
Driver Free U Disk - You may manage your files directly through “Portable
Device” in “My Computer” on Windows 2000 Operating System or above
without driver.
Brief View of Player
A. About player’s battery
Player has an internal, non–user-replaceable rechargeable lithium battery.
For best results, the first time you use the player, let it charging for about 1 - 2
hours or until the charging LED lights go Offbefore you use it.
Charging the Battery
You can charge the Player’s battery in two ways:
1. Connect player to your computer. Or,
2. Use the USB power charger. (availableseparately)
B. Insert Micro SD Memory Card
This device is design without an internal memory; put a Micro SD memory card
insert into thememorycard slot before use the player.
Plug in the Micro SD memory card into player card slot at side, now you can
use the player.
You can upload your desired media files to the player, or, you can upload your
desired media files to the Micro SD memory Card direct with your computer
before insert it to the player.
When you want to insert / remove the Micro SD memory card from memory
card slot. Make sure the player is in Off status. Otherwise, the player functional

XEMIO-200USER MANUAL
2
maydead halt or the internal data / files will be lost / damaged.
Note: The status indicator light will be flashing fast and then will go Off, when you
want to turn On the player. However, the player will turn Off automatically If no
memorycard has inserted to player’s cardslot.
C. Key function of buttons
Appearance
Power ON –OFF switch: Main Power On and Off
button: To Play / Pause or StandbyOn / Off.
button:To previous song or fast-backward.
button: To the next song or fast-forward.
button:To increase volume level.
Button:To decrease volume level.
USB: For PC connection and charge function

XEMIO-200USER MANUAL
3
D. Getting start player
1 Turn On / Off
1.1 Plug in earphone set into player’s jack
1.2 Slide the Power ON–OFF to “ON”position, the player will turn On and
play music directly. (make sure the Micro SD memory card has
plugged
1.3 Press and hold button, for about 2 - 3 second, the player will turn
Off and On in standbymode.
2 Play / Pause Music
2.1 Press button to pause the playingmusic, press it again to play.
2.2 If player is in pause state for 3 minutes, it will be turned to Off
automatically.
3 Adjust Volume
3.1 Pressing / button to increase or decrease volume level.
3.2 Press and hold / button to increase or decrease volume level
faster.
4 Play Next / Previous Music
4.1 In playing mode, press button to select next music.
4.2 Press button to select previous music.
5 Play Fast-Forward / Fast-Backward
5.1 In playing mode, press and hold button to enter fast-forward
mode.
5.2 Press and hold button to enter fast-backwardmode.
E. USB mode

XEMIO-200USER MANUAL
4
1 Connect player to computer
1.1 Connect player to computer with the USB cable, then a “USB Mass
Storage Device” is detected and related driver is installed by you
computer. (Windows 2000 / XP System or about)
1.2 Aremovable disk drive will be shown in “My computer” folder, now you
can start Read / Write operation. And the battery is charging in
background.
1.3 In connection mode, the player can be play music if you press or
pressing the playbutton. However, the player maystop orstart playing
if removing the PC connection.
2 Remove player from computer:
Pleasesafetyto removes the player in computer, otherwise, the datastored in
the Player might loss.
2.1 If you’re using a Windows PC, you can disconnect the player in My
Computer or by clicking the “Safely Remove Hardware”icon in the
Windows system tray.
2.2 If you’re using a Mac, you can also disconnect player bydragging the
player icon on the desktop to the Trash.
2.3 And now, is safe to disconnect the player with your computer, unplug
the USB connector from player and then your computer.
2.4 If you’re accidentally disconnect player without disconnect it,
reconnect itto your computer.
2.5 At power ON mode, after remove the PC connection, the player will
auto-playthe music directly.
F. Indicator light function
Playing Mode: LED lightflashing once per second.

XEMIO-200USER MANUAL
5
Pause Mode:LED lightbright.
PC Connecting Mode:LED lightbright. (Charging in background)
Recharging Mode:LED light bright.
Recharge complete:LED light will go OFF
G. Troubleshooting
Playcannot turn ON
Check whether batteryhave enough energy.
Check whether the main power ON-OFF to slide to
ON position or not.
No sound is heard
Check whether Volume is set to “minimum” and
connect the headphone plugs firmly.
Check whether the headphone plug is dirty.
Corrupted WMA / MP3 maymake a static noise and
the soundmaycut off. Make sure that the music files
are not corrupted.
Check whethermusic files format are support.
Download of music
files fails.
Check whether player’s USB connector is connected
with computer properly.
Check whether driver is installed correctly.
Check whether the player’s memory is in full.
Check whether the Micro SD memory card is
inserted.
H. Specification
Dimension
43 mm (H) x29.8 mm (W) x15 mm (D)
Weight
14.5 g
PC Connection
USB 2.0 (High Speed)

XEMIO-200USER MANUAL
6
Earphone Impedance
32 Ohm
Internal Memory
Nil
External Memory
Micro SD MemoryCard (up to 8GB)
Battery
Built-in Rechargeable Lithium battery(3.7V110mA)
Playing Time: about 4-5 Hours
Supports Music Format
MP3
32kbps - 320kbps
WMA
32kbps –384kbps
Audio
Earphone Output Power
L: 275mV(32 Ohm)
R: 275mV(32 Ohm)
FrequencyResponse
20Hz–20,000Hz
SNR
80dB
Operation Temperature
-0℃- 40℃
Operation Systems
Windows 98/SE/ME2000/XP/Vista/Win7, MAC9.2 or
above
Note:Product design and specification aresubject to change without prior notice.
I. Recycling
If at any time in the future you should need to dispose of this
product, please note that: Waste electrical products should not be
disposed of with household waste. Please recycle where facilities
exist. Check with your LocalAuthorityor Retailer for recycling advice.
(Waste Electrical and Electronic Equipment Directive)
For information andsupport, www.lenco.eu