LENCO MC-460BK User manual

1
Model: MC-460
USER MANUAL
Hifi set with internet, DAB+, FM radio, CD player and
turntable
HANDLEIDING
Hifi-set met internet, DAB+, FM-radio, cd-speler en
platenspeler
BEDIENUNGSANLEITUNG
HiFi-Anlage mit Internet-, DAB+- und FM-Radio, CD-
Player und Plattenspieler
MODE D’EMPLOI
Chaîne Hifi avec radio Internet, DAB+, FM, lecteur CD et
tourne-disque
MANUAL DEL USUARIO
KÄYTTÖOHJE
Equipo Hifi con internet, DAB+, radio FM, reproductor de
CD y tocadiscos
Hifi-setti, jossa internet, DAB+, FM-radio, CD-soitin ja
levysoitin

2
Index:
English........................................................................................................................................ 3
Nederlands .............................................................................................................................. 34
Deutsch ................................................................................................................................... 65
Français.................................................................................................................................... 99
Español .................................................................................................................................. 131
Suomi..................................................................................................................................... 162
Version : 3.0

3
English
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the device on a shelf,
leave 5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and
other heat-generating products or naked flame. The device can only be used in
moderate climates. Extremely cold or warm environments should be avoided. Working
temperature between 0° and 35°C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and
restart the device following the instruction manual. During file transmission, please
handle with care and operate in a static-free environment.
6. Warning! Never insert an object into the product through the vents or openings. High
voltage flows through the product and inserting an object can cause electric shock
and/or short circuit internal parts. For the same reason, do not spill water or liquid on
the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near
swimming pools.
8. The device shall not be exposed to dripping or splashing and make sure that no objects
filled with liquids, such as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur. When the unit is used in a warm
wet room with damp, water droplets or condensation may occur inside the unit and
the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours
before turning on the power: the unit should be dry before getting any power.
10. Although this device is manufactured with the utmost care and checked several times
before leaving the factory, it is still possible that problems may occur, as with all
electrical appliances. If you notice smoke, an excessive build-up of heat or any other
unexpected phenomena, you should disconnect the plug from the main power socket
immediately.
11. This device must operate on a power source as specified on the specification label. If
you are not sure of the type of power supply used in your home, consult your dealer or
local power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.
To remove severe stains, you may use a damp cloth with dilute detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
15. Do not interrupt the connection when the device is formatting or transferring files.
Otherwise, data may be corrupted or lost.
16. If the unit has USB playback function, the USB memory stick should be plugged into the
unit directly. Don’t use an USB extension cable because it can cause interference
resulting in failing of data.
17. The rating label has been marked on the bottom or back panel of the device.
18. This device is not intended for use by people (including children) with physical, sensory
or mental disabilities, or a lack of experience and knowledge, unless they’re under
supervision or have received instructions about the correct use of the device by the
person who is responsible for their safety.

4
19. This product is intended for non professional use only and not for commercial or
industrial use.
20. Make sure the unit is adjusted to a stable position. Damage caused by using this
product in an unstable position vibrations or shocks or by failure to follow any other
warning or precaution contained within this user manual will not be covered by
warranty.
21. Never remove the casing of this device.
22. Never place this device on other electrical equipment.
23. Do not allow children access to plastic bags.
24. Only use attachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required when the device
has been damaged in any way, such as the power supply cord or the plug, when liquid
has been spilled or objects have fallen into the device, when the device has been
exposed to rain or moisture, does not operate normally, or has been dropped.
26. Long exposure to loud sounds from personal music players may lead to temporary or
permanent hearing loss.
27. If the product is delivered with power cable or AC power adaptor:
⚫If any trouble occur, disconnect the AC power cord and refer servicing to qualified
personnel.
⚫Don’t step on or pinch the power adaptor. Be very careful, particularly near the
plugs and the cable’s exit point. Do not place heavy items on the power adaptor,
which may damage it. Keep the entire device out of children’s reach! When
playing with the power cable, they can seriously injure themselves.
⚫Unplug this device during lightning storms or when unused for a long period.
⚫The socket outlet must be installed near the equipment and must be easily
accessible.
⚫Do not overload ac outlets or extension cords. Overloading can cause fire or
electric shock.
⚫Devices with class 1 construction should be connected to a main socket outlet
with a protective earthed connection.
⚫Devices with class 2 construction do not require a earthed connection.
⚫Always hold the plug when pulling it out of the main supply socket. Do not pull
the power cord. This can cause a short circuit.
⚫Do not use a damaged power cord or plug or a loose outlet. Doing so may result
in fire or electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell
batteries:
Warning:
⚫“Do not ingest battery, Chemical Burn Hazard” or equivalent working.
⚫[The remote control supplied with] This product contains a coin/button cell
battery. If the battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death.
⚫Keep new and used batteries away from children.
⚫If the battery compartment does not close securely, stop using the product and
keep it away from children.
⚫If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
29. Caution about the use of Batteries:
⚫Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
⚫Battery cannot be subjected to high or low extreme temperatures, low air
pressure at high altitude during use, storage or transportation.
⚫Replacement of a battery with an incorrect type that can result in an explosion or
the leakage of flammable liquid or gas.
⚫Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of
a battery, that can result in an explosion.

5
⚫Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or that leakage of flammable liquid or gas.
⚫A battery subjected to extremely low air pressure that may result in an explosion
or the leakage of flammable liquid or gas.
⚫Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
•Unpack all parts and remove protective material.
•Do not connect the unit to the mains before checking the mains voltage and before all
other connections have been made.
WARNING
Class 1 Laser Product
Warning: Do not touch the lens.

6
FRONT VIEW
1. LCD Display
2. CD door
3. Standby/menu Button
4. Preset Button
5. Scan Button
6. Record Button
7. Play/Pause Button
8. CD door eject Button
9. Left /SKIP/TUNE- Button
10. Right/SKIP/TUNE+ Button
11. Remote Control Receiver
12. USB jack(Record and playback)
13. Earphone jack
14. Volume/UP/Down/Enter/Stop Button
REAR VIEW
15. AC cable
16. Aux in jack
17. Line out
18. L/R speaker connector

7
REMOTE CONTROL

8
1. Standby button
2. Switch speaker ON/OFF
3. Menu-Main menu
4. Preset-saved stations,Favorites,etc
5. Record Button
6. Eject button
7. Media Center;Go back one track
8. Media Center;Play/Pause
9. Media Center;Go forward one
track
10. Stop play button
11. EQ button
12. Alarm Button
13. Up cursor button
14. Left cursor button
15. Enter Confirm selection
16. Right Cursor button
17. ▼Down cursor button
18. V- Decrease volume
19. V+ Increase volume
20. 0.....9 Call up favorites/Memory; input
letters and numbers
21. Dimmer
22. Sleep
Before Started
Network Requirement
1. Before using the Lenco MC-460,the following requirements are needed:
2. A broadband connection in combination with a wired/wireless access point, router or
similar network device.
3. The network device needs to support WIFI (802.11b/g/n) wireless connection.
(Only 2.4 Ghz)
4. A PC or smart phone with a network ready. This network has to be the same one as the
Lenco MC-460 equipped with.
Symbols on the dislay
Connection is being established, device functioning
No wireless connection
Wireless connection established
FM radio reception: Mono
FM radio reception: Stereo

9
FM radio function select
AUX signal source selected
Speaker off
Search
Alarm on
Radio station saved as preset
FM radio station saved
Start Recording
Stop recording
Getting stared
BATTERY INSTALLATION (REMOTE CONTROL)
Battery installation:
1. Press the tab on the battery door and slide it off.
2. Install two (2) x AAA size batteries into the battery compartment as the figure on right
and the polarity markings inside the battery compartment.
3. Slide the battery door back
BATTERY INSTALLATION (REMOTE CONTROL)
Battery Precautions:
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
(manufacturer's directions).
3. Do not dispose batteries in fire. They may explode or leak.

10
4. Clean the battery contacts and also those of the device prior to battery installation.
5. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
6. If the batteries in the device are consumed or the device is not to be used for a long
period of time, remove them.
7. Do not try to re-charge normal batteries; they can overheat and explode
Speaker connect:
1. The speaker on the left is connected to the L terminals of device, the red cable of
speaker is connected to the red terminals, the black cable is connected to the black
terminals.
2. The speaker on the right is wired the same as the left speaker.

11
The packaging box contains following items:
Get the network ready
For wireless LAN (WLAN) network connection:
Check if WLAN LINK/ACT light of the wired/wireless access point or router illuminated.
Consult the user guide of that for any questions.
Note: WiFi allows date transfer over short distances within 20 meters without the need of
cabling between the devices. Any walls or cellings may reduce the quality of the WiFi
connectivity.
Therefore try to locate the Lenco MC-460 and/or the access point within the distance
above, and avoid any obstacles between two devices.
Make sure you are connecting to a 2.4Ghz Wifi network! (this device is not compatible
with 5 Ghz Wifi networks)

12
INITIAL SETUP
1. When it is first time running the device, it will ask you to set Language and Network
Configurations.
1
2
2. Do you want to check the WIFI network availability when powering on the device? Use
the Navigation wheel to select the desired option and press the Navigation wheel to
confirm.
3
3.1.Select YES if you want to continue and connect to your WIFI network using the
standard method. Press the Navigation wheel to confirm. Continue reading ‘network
configuration’ option 1.
3.2.Select YES (WPS) if you would like to set up with the WPS (WIFI PROTECTED SETUP)
function of your router (please verify with your router’s manual if it’s available).
Press the Navigation wheel to confirm. Continue reading ‘network configuration’
option 2.

13
3.3 Select NO and Press the Navigation wheel to confirm if you want to skip the Wireless
network setup. You can configure it later in the configuration menu.
NETWORK CONFIGURATION
Standard network configuration
When selecting this option the MC-460 will scan for available WIFI networks.
The display will show the networks it found.
Select your WIFI network by turning the Navigation/OK wheel and confirm by pressing
the Navigation/OK wheel.
If your selected WIFI network requires a password, you can enter it in the next screen.
Enter your password by pressing the numeric keys on the remote control, followed by
the Navigation right button (NOTE: you have to press the navigation right after every
character).

14
To make a correction, press the Navigation Left to go backwards and delete the last
character at the same time. When the password is completed, press the OK button to
confirm.
If you want to enter the password directly on the MC-460 front panel, you can turn the
Navigation wheel to select the first character and then press the button to move
forward to the next character. To make a correction, press the button to go back
and delete the last character at the same time.
When the password is completed, press the Navigation/ok button to confirm
Note: following characters can be used:
Numbers (from 0-9)
LATIN letters (from A to Z and from a to z)
Characters (@, Blank,!,”,#,$,%,&,*,’,+ and (,)
It may take a few seconds to establish the connection to the network.
Main Menu
Once the connection is established, the main menu appears with the main menu items:

15
Internet Radio: For listening radio via the internet.
Media Center: For listening music via USB or UPnP
Information-Center: Weather Information, Financial Information, System
Information.
AUX: For listening music via an external audio source.
Configuration: For the settings menu.
Local Radio: Shortcut for „Local Radio“ of the section „Internet Radio“.
DAB+: For listening music via DAB+.
FM: For listening music via FM.
Bluetooth: For Wireless music transmission from smartphone or tablet
Bluetooth (range 10m, depending on the environment)
Vinyl: For vinyl playback
CD: For CD playback

16
CONFIGURATION
Here you can configure various parts of your Lenco MC-460 press ‘Enter’ to select the
configuration menu.
Time
Display
Analog/Digital
Manage
my mediaU
When it is enabled, my mediaU will show on the main menu. If various
mediaU accounts exist in the Radio, Select the default login account in here.
Network
Wireless Network Configuration: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically select the required
AP. Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS
button, you can set up the network connection easily via WPS function.
Enter it and go to press the WPS/QSS button on your router within
120 seconds. The connection between the router and device will then be
configured automatically.
Manual Configuration: You can choose DHCP (which assigns the ip address
automatically) or manually input the IP address for wireless network
connection. The following information has to be entered: SSID (name of
access point), IP Address, subnet mask, default gateway, preferred DNS
server, alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search for available
AP. Select the required AP.

17
Date &
Time
Set Date and Time
Set Time Format: 12 Hour or 24 Hour
Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY
Daylight Saving Time (DST): On or Off
⚫ON
Tips: When “ON” is selected, the time will be one hour later than the
current time.
⚫OFF
Tips: When “OFF” is selected, the time will be same as the current time. If it
was already in “Daylight Saving Time(DST)” and you choose”OFF”, the time
will be deducted by one hour, that’s to say, the time will be same as the
actual time.
Alarm
There are 3 independent Alarms which can be set. 2 different Alarms
(Alarm 1, Alarm 2) and one NAP alarm which is a countdown alarm which
can be used when doing a quick sleep.
Press the Alarm button on the remote control to enter the alarm settings
menu directly and follow the following steps.
Setting the alarm
-Press ‘Alarm’ button on remote control
-Select Alarm 1
-Select Turn On
-Press the ‘ok’ button on the remote or press the navigation wheel on
the unit.
-Press the ‘ok’ on the “Repeat:” option and select the how the alarm
should work.
(Everyday, once or select the required days)
-Press the left arrow key on the remote or unit to return to the
previous alarm menu, then select “Time:” and press ‘ok’
-You now can use the up down buttons to change the highlighted
Hours then press the right arrow button once to switch to the
Minutes and use the up/down buttons to change the minutes. Press
the ‘ok’ button to confirm.
-Select the “Sound:” and press the ‘ok’ button. Now you can choose
between Beep, Melody, Internet Radio, FM, DAB/DAB+,USB,CD mode.
When internet radio is selected as wake up sound, you can use one
of your favorite radio stations (which have to be stored as favorite
on the MC-460).

18
Note: when no internet connection is available within 1 minute
after the alarm is activated the MC-460 will automatically switch to
Melody.
When selecting USB as wake up sound, you can select one of the
music files stored on the inserted usb memory device.
Repeat the above steps to setup the alarm 2
Setting the NAP alarm
-Press ‘Alarm’ button on remote control
-Select NAP alarm
-Use the up/down buttons to choose the desired minutes
You can choose 5/10/20/30/60/90 or 120 minutes and then press the
‘ok’ button to select
-Press the left arrow button to return to the main screen
When the NAP alarm is activated you see a clock icon on the lower right
corner with the remaining time.
Timer
Scheduled
Playing
Countdown timer (max. 100min)
Allow you to set a time for when the device switches on
⚫Turn On
Select Repeat: Everyday, Once or Mon to Sun
Select Time: HH:MM to HH:MM
Select Sound: Internet Radio,FM,DAB/DAB+
⚫Turn Off
Language
English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/
Svenska/Norsk
bokmal/Dansk/magyar/Cesky/Slovensky/Polski/Turkce/Suomi
Dimmer
Power Saving/Turn On
Display
Color/Monochrome

19
Power Management
This option configures when the MC-460 should go into standby mode.
You can select Turn off/5 minutes/15 minutes/30 minutes.
When configured, the MC-460 will switch to standby when no music is
played for the configured time.
Use the Turn off setting to ignore the standby function.
Sleep Timer
Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes.
Once the time is set, there will be a bed icon with the remaining minutes
at the top right corner of the display and the device will turn to standby
after the configured time.
(You also can use the Sleep button on the remote control to use this
function)
Internet
Radio
⚫Buffer: configure the buffer time of the music playback 2/4/8
Seconds
⚫Sound Quality: High or Low
Weather
Activate/deactivate the weather forecast on the standby display. Choose
your preferred temperature unit (°F or °C) and then proceed by entering
your location. When activated, the weather forecast is shown in turns
with the clock display on the standby screen (it changes every 10 secs).
DAB/FM
Setup
⚫FM Mode: Set Mono or Set Stereo
⚫FM Threshold
Seek Threshold: Strong, Default or Weak
Stereo Threshold: Strong, Default or Weak
⚫DAB Threshold: Strong, Default or Weak
⚫Service following(FM-IR): Enable or Disable
⚫Service following(DAB-IR): Enable or Disable
Local Radio
Setup
There is a shortcut Local Radio from the Internet Radio menu so that you
can easily go to the station list of your location. You can setup your
location manually or let the system detect your current location. If you
choose to automatically detect your location, the system will detect the
location according to the IP address of your connected network. Press
Local Station to enter the local radio station list directly.
Playback
Setup
Select the play mode of the media center. You can select: Off (no repeat
or shuffle), Repeat all, Repeat one,or Shuffle.

20
Device
Menu
The MC-460 default device name for DLNA is “AirMusic”. You may
rename it for DLNA set upon the PC or mobile. Use the QR code for
download and install the “AirMusic” control App.
You can select “Local Radio, my mediaU, Internet Radio, Sleep Radio, USB,
UPnP, Media Center, FM,DAB/DAB+,CD, Information Center, AUX,
Bluetooth, Timer, Alarm, Vinyl” playing mode.
Equalizer
The default equalizer setting is “normal”, but you may change it to “Flat,
Jazz, Rock, Soundtracks, Classical, Pop, News or my EQ”. Press the “EQ”
button on the remote control to quickly change the equalizer mode.
Resume When Power On
The system default setting is to resume the internet radio playback if you
were listening to internet radio or media center before switching off the
unit. If you turn this option off, the system will return to the main menu
when switching on the unit again.
Software Update
If there is a software update on the server, the system will notify you.
Before starting a software upgrade, ensure that the unit is plugged into a
stable mains power connection. Disconnecting the power during a
software update may permanently damage the unit.
Reset to
Default
Restore to default settings. After the device is reset, the system will show
the language menu. Choose the desired language and press the navigate
wheel
Internet Radio
From the main menu use the Navigation wheel/ok to select INTERNET RADIO and press the
Navigation wheel/ok to start.
Now you can use the Navigation wheel again to scroll through the different menu options
and select the desired option by pressing the Navigation wheel
Press to return to the previous menu.
After successfully connecting to a radio station, the station information will be shown. This
information can be changed by pressing the or button.
Below you find the explanation of the various Internet Radio menu options:
My Favorite
These are your favorite preset stations. It can hold up to 250 entries.