LevelOne WBR-6022 User manual

LevelOne
User Manual
Ver. 1.4
WBR-6022
300Mbps Wireless HomeGuard 22 Router

2
Safety
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV technician for help.
CE Declaration of conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022
class B for ITE, the essential protection requirement of Council Directive 89/336/EEC on the
approximation of the laws of the Member States relating to electromagnetic compatibility.
CE Marking Warning
Hereby, Digital Data Communications, declares that this product (Model-no. WBR-6022) is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The CE-Declaration of Conformity can be downloaded at:
http://www.levelone.eu/support.php

3
General Public License
This product incorporates open source code into the software and therefore falls under the guidelines
governed by the General Public License (GPL) agreement.
Adhering to the GPL requirements, the open source code and open source license for the source
code are available for free download at http://global.level1.com.
If you would like a copy of the GPL or other open source code in this software on a physical CD
medium, LevelOne (Digital Data Communications) offers to mail this CD to you upon request, for a
price of US$9.99 plus the cost of shipping.

4
Table of Content
TABLE OF CONTENT...............................................................................................................................................................4
1 INTRODUCTION................................................................................................................................................................5
2 PRODUCT FEATURES......................................................................................................................................................6
3 PACKAGE CONTENTS & HARDWARE INSTALLATION........................................................................................8
4 SETUP THE WBR-6022 HOME SURVEILLANCE ....................................................................................................14
4.1 EASY SETUP UTILITY ...................................................................................................................................................14
4.2 QUICKLY TO SETUP A HOMEGUARD SYSTEM.....................................................................................................22
4.2.1 HOMEGUARD CONFIGURATION.......................................................................................................................23
4.2.2 SEARCH NEW DEVICE..........................................................................................................................................25
4.2.3 SETUP DEVICE & LEVEL1DNS............................................................................................................................28
4.2.4 VIEW THE VIDEO...................................................................................................................................................32
4.2.5 PLAYBACK THE RECORD....................................................................................................................................34
4.2.6 SCHEDULE RECORD..............................................................................................................................................35
4.3 DETAIL TO SETUP A HOMEGUARD SYSTEM ........................................................................................................37
4.3.1 VIEW , SNAP AND RECORD .................................................................................................................................37
A. VIEW ALL IP CAMERAS...............................................................................................................................................37
B. VIEW SINGLE IP CAMERA...........................................................................................................................................37
C. VIEW PTZ IP CAMERA..................................................................................................................................................38
D. SNAP THE SCREEN SHOT.............................................................................................................................................38
E. RECORD IP CAMERA ....................................................................................................................................................39
F. CHECK THE RECORD FILE.........................................................................................................................................39
4.3.2 SCHEDULING RECORD.........................................................................................................................................40
4.3.3 ADVANCED SETTING............................................................................................................................................41
1. ACCOUNT MANAGEMENT ..........................................................................................................................................41
A. ADMINISTRATOR MANAGEMENT............................................................................................................................41
B. ADD NORMAL USER......................................................................................................................................................41
C. NORMAL USER MANAGEMENT.................................................................................................................................42
2. EMAIL ALERT .................................................................................................................................................................42
3. UNREGISTER...................................................................................................................................................................42
4. CHANGE ALIAS DOMAIN NAME................................................................................................................................43
5. LOGIN TOOL....................................................................................................................................................................44
5 ROUTER SETTING..........................................................................................................................................................45
5.1 WIZARD.............................................................................................................................................................................45
5.2 ADVANCED SETUP.........................................................................................................................................................47
5.2.1 BASIC SETTING.......................................................................................................................................................48
5.2.2 FORWARDING RULES...........................................................................................................................................63
5.2.2.1 SECURITY SETTINGS............................................................................................................................................67
5.2.2.2 ADVANCED SETTINGS..........................................................................................................................................75
5.2.2.3 TOOLBOX .................................................................................................................................................................85
TECHNICAL SPECIFICATIONS...........................................................................................................................................99
Default Settings
IP Address 192.168.0.1
Username
admin
Password
password
Wireless Mode Enable
Wireless SSID LevelOne
Wireless Security None

5
1 Introduction
Congratulations on your purchase of LevelOne WBR-6022 Wireless HomeGuard 22 Router. This
product is specifically designed for Small Office and Home Office needs. It provides a complete
SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users.
Instructions for installing and configuring this product can be found in this manual. Before you install
and use this product, please read the manual carefully for fully exploiting the functions of this product.
User Manual Overview
Introduction
Describes the WBR-6022 Wireless HomeGuard 22 Router.
Unpacking and Setup
Helps user to get started with the basic installation of the router.
Hardware Installation
Describes the LED indicators router.
Configuration
Describes the functionalities and its settings.
Technical Specifications
Lists the technical (general, physical and environmental)
specifications of the router.

6
2 Product Features
This chapter provides the package contents and setup information for the Wireless HomeGuard 22
Router.
Features
HomeGuard functions
Camera View
Get supporting IP Cameras and after pairing with them, this device could show the camera screen on web UI.
Camera Record
Get supporting IP Cameras and storage devices, after pairing with them, this device could record the video data of
camera into storage HDD. It also supports schedule and manually recording.
Level1DNS.net
The WBR-6022 had build-in a DDNS account, user can easily to remote access via internet, the default DDNS
account also allow user to modify by level1dns.net (Level1 Service)
Router Basic functions
Auto-sensing Ethernet Switch
Equipped with a 4-port auto-sensing Ethernet switch.
WAN type supported
The router supports some WAN types, Static, Dynamic, PPPoE , PPTP ,L2TP, Dynamic IP with Road Runner.
Firewall
All unwanted packets from outside intruders are blocked to protect your Intranet.
DHCP server supported
All of the networked computers can retrieve TCP/IP settings automatically from this product.
Web-based configuring
Configurable through any networked computer’s web browser using Netscape or Internet Explorer.
Virtual Server supported
Enable you to expose WWW, FTP and other services on your LAN to be accessible to Internet users.
User-Definable Application Sensing Tunnel
User can define the attributes to support the special applications requiring multiple connections, like Internet
gaming, video conferencing, Internet telephony and so on, then this product can sense the application type and
open multi-port tunnel for it.
DMZ Host supported
Lets a networked computer be fully exposed to the Internet; this function is used when special application
sensing tunnel feature is insufficient to allow an application to function correctly.
Statistics of WAN Supported
Enables you to monitor inbound and outbound packets
Wireless functions
High speed for wireless LAN connection
Up to 80Mbps data rate by incorporating Orthogonal Frequency Division Multiplexing (OFDM).
Roaming
Provides seamless roaming within the IEEE 802.11b (11M) and IEEE 802.11g (54M) WLAN infrastructure.
WDS(Wireless Distribution System): It is a system that enables the interconnection of access points wirelessly.
WPS(WiFi Protection Setup):WPS is WiFi Protection Setup which is similar to WCN-NET and offer safe and
easy way in Wireless Connection.
IEEE 802.11b compatible (11M)
Allowing inter-operation among multiple vendors.
IEEE 802.11g compatible (54M)
Allowing inter-operation among multiple vendors.
IEEE 802.11n compatible (300M)
Green functions
Standby mode:
When No Wireless Station is associated with Green Router in several minutes, it will be automatically switched
into Standby mode. Of course, this mode will not influence on end users to roam Internet, such as noon Reset
time 12:00~13:30.

7
Sleep Mode:
When time matches with rule of Schedule, Green Router will detect whether any client or Network flow. If No,
Green Router will be in Sleep mode. Otherwise, it will not go to sleep mode until no data flowing in network.
This mode can save almost 100% energy. (End-user can’t use Internet in Sleep Mode.) Such as
11:00PM~10:00AM for Family or 19:00PM~07:00AM for Office or in Weekend.
Smart Schedule:
When time matches with Schedule rule, for example,11:00PM~08:00AM is in Sleep Mode, Green Router will
detect if Network flow or Wireless Stations at 11:00PM, if no, it will go in Sleep Mode until 8:00AM. If yes,
Green Router will detect until no data flowing and Wireless Stations then go “Sleep Mode”.
Smart Schedule has another feature is when end-user wakes up at 3:00AM,then click On/Sleep button to
awaken Green Router to use Internet until 5:00AM, then Green Router will detect no flow and Wireless
Stations ,then go “Sleep Mode” until 08:00AM.
On/Sleep Button:
End users can wake up Green Router from Sleep Mode via this Button.
※ There is a limit that End-user forces to sleep via this button and has to wake Green Router up by this Button. And
Force to wake up via this button and can Sleep by Schedule.
Security functions
Packet filter supported
Packet Filter allows you to control access to a network by analyzing the incoming and outgoing packets and
letting them pass or halting them based on the IP address of the source and destination.
Domain Filter Supported
Let you prevent users under this device from accessing specific URLs.
URL Blocking Supported
URL Blocking can block hundreds of websites connection by simply a keyword.
VPN Pass-through
The router also supports VPN pass-through.
802.1X supported
When the 802.1X function is enabled, the Wireless user must authenticate to this router first to use the Network
service.
Support WPA-PSK and WPA version 1 and 2
When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network
service
SPI Mode Supported
When SPI Mode is enabled, the router will check every incoming packet to detect if this packet is valid.
DoS Attack Detection Supported
When this feature is enabled, the router will detect and log the DoS attack comes from the Internet.
Qos(Quality of Service)
Provide different priority to different users or data flows, or guarantee a certain level of performance.
Advanced functions
System time Supported
Allow you to synchronize system time with network time server.
E-mail Alert Supported
The router can send its info by mail.
Dynamic dns Supported
At present,the router has some ddns providers,like.dyndns,no-ip TZO.com and dhs.org.
SNMP Supported
The router supports basic SNMP function.
Routing Table Supported
Now, the router supports static routing.
Schedule Rule supported
Customers can control some functions, like virtual server and packet filters when to access or when to block.
Other functions
UPNP (Universal Plug and Play)Supported
The router also supports this function. The applications: X-box(360), Msn Messenger, Windows Messenger and NDSL.

8
3 Package contents & Hardware Installation
3.1. Package Contents
Open the box of the Wireless HomeGuard 22 Router and carefully unpack it. The box should contain
the following items:
 WBR-6022 Wireless HomeGuard 22 Router
 Power Adapter
 Cat.5 Cable
 Antenna x2
 CD Manual / Utility
 Quick Installation Guide
If any item is found missing or damaged, please contact your local reseller for replacement.
PS: the setup wizard utility in the CD, it will help user to setup the environment easily.

9
Front View
WLAN Button •Press and hold for 3 seconds to turn the Wireless LAN on or off.
•Please confirm WLAN status as indicated by WLAN Light
Status Light •A steady blinking light indicates the device is ready
WAN Light •A solid light indicates the WAN port is connected.
WLAN Light •Off indicates Wireless LAN is turned off, or no wireless client is
connected to the router.
•LED blinks during wireless data transmission, or when there is a
wireless client connected to the router.
•Fast and steady blinking indicates WPS function is activated and the
router is pairing with wireless client.
LAN Lights •A solid light indicates to an Ethernet enable computer on ports 1 ~ 4.
•LED blinks during data transmission.
Sleep Light •When solid light (orange) means that the router is in sleep mode.
WPS Button •Wi-Fi Protected Setup push button. Press to activate WPS pairing with
wireless client.
Reset (WLAN and
WPS Buttons)
•Press the WLAN and WPS buttons together for 5 seconds to reboot
and restore the device to factory default settings.

10
Rear View
Power Jack •Receptor for the supplied power adapter
LAN Ports (1~4) •Connect Ethernet devices such as Level1 IP Cameras, computers,
switches or other network devices.
WAN Port •The WAN port is the connection for the Ethernet cable to the Cable or
DSL Modem.
Sleep Button •This button is used to force the router to enter sleep mode, or wake up.
It has the highest priority and overrides the Power Saving Schedule.
• Green Router is in Sleep Mode.(Press this button about 1 sec.)
• Green Router is in Standby or On mode. ( Press this button about 1 sec.)
Antennas •Detachable antennas allow users to change antenna if necessary.
WAN
LAN
PWR
Sleep Button 1
2
3
4

11
3.2. Hardware Installation
3.2.1. Decide where to place your Wireless Router
You can place your Wireless Router on a desk or other flat surface. For optimal performance, place
your Wireless Router in the center of your office (or your home) in a location that is away from any
potential source of interference, such as a metal wall or microwave oven. This location must be close
to power and network connection.
A. Attach the included antennas.
B. Connect your broadband internet connection to WBR-6022’s WAN port.

12
C. Connect the Computer LAN cable.
D. Plug in the Power Adapter
E. Wait until the Status light is blinking steadily. This means the router is ready for use.

13
F. Plug in the IP Camera & NAS for the Surveillance environment
Please refer the below Diagram
3.2.2. Check Your Network Settings
A. Please make sure your PC can get IP address automatically so the WBR-6022 can communicate
with your PC during configuration.
•Select “Control Panel” > “Network Connections”.
•Right click the “Local Area Connection” and choose “Properties”.
•Select the TCP/IP protocol for your network card.
•Click on the Properties button. You should then see the following screen and make sure you
have selected “Obtain IP address automatically”
B. Reboot computer to make sure you have received the IP address correctly form the Router.

14
4 Setup the WBR-6022 Home Surveillance
Once properly configured, the WBR-6022 Wireless HomeGuard 22 Router will obtain and assign IP
address information automatically. Configuration settings can be established through the Web-Based
Configuration Menu, or the Easy Setup Utility on the CD.
4.1 Easy Setup Utility
Insert the CD into your CD-ROM drive of your computer.
The autorun program should start automatically.
If it does not, please run autorun.exe on your CD.
In the autorun screen, click Utility to begin the Easy Setup Utility.
Before running Easy-Setup, please make sure that your PC is correctly connected with the
router. After executing it, you could see following screen:

15
Click “Next” to continue.
Select Wizard, the application will go steps one by one.

16
First, you have to make sure that your hardware connections are all correct. Click “Next” to continue.
Then, you have to adjust the time zone. This router could manage the power by time scheduling, so
we have to correct its system time. Click “Next” to continue.

17
Setup the Power Management schedule, and then click “Next” to continue.
Smart Schedule means, when the router should go to sleep mode due to the schedule rule,
it would check the network packet first. If there are still some network packets being
transferred, the rule would not be executed immediately until the network flow is stop.
Set wireless enable or disable, and then click “Next” to continue.

18
For wireless setting, the default SSID of wireless interface is “LevelOne”, default channel is 11, and
default encryption option is “NONE”. You could change it right now or later through WEB UI.
We strongly suggest you change the encryption option as soon as possible, because the non-
encrypted wireless network is not secured. Click “Next” to continue.
Click “Next” to continue.

19
Next step, we will help you to setup the WAN configurations.
Please follow the wizard, and choose the WAN type you used.
Click “Next” to continue

20
Click “Next” to continue
Now prepare to test the WBR-6022’s Level1DNS connection and account name. Click “Next” to continue.