LevelOne WAB-3003 User manual

2
108Mbps 11g
Outdoor PoE AP WAB-3003
H/W Version: 1
in the AP mode. Furthermore, one WAB-3003 with
multiple SSIDs is capable of acting as multiple Virtual
Access Points (VAPs). By tagging the trac from each
VAP with a unique VLAN ID, it allows for segmenting
a corporate network by VLANs to protect critical
resources.
Multiple Operation Modes for Dierent
Infrastructures
WAB-3003 supports multiple operation modes (AP/
Bridge/CPE) and works well as a last-mile solution for
wireless ISPs (WISPs). When operating in CPE (Client)
mode, it functions as a Wi-Fi modem gateway to
receive wireless signal over the last-mile Internet feed
from WISPs. The CPE’s bandwidth to the Internet can
be assigned by the WISP.
Being a versatile Wi-Fi device, WAB-3003 does not
limit itself to outdoor usage only. When managed by
a Controller (such as the AMG-series), it performs as a
Wi-Fi base station in either a public or private wireless
access deployment.
Key Features
- Rugged, Compact, and Adaptive to Versatile
Environments
- High Transmit Power and N-type Connector
- High-Speed with QoS for Voice, Video, and Data
Applications
- Power over Ethernet (PoE) & Flexible Mounting
Options
- Multiple Operation Modes for Dierent
Infrastructures
- Business-Class Security and Multiple-SSID/VLAN
tagging Supported
AMG-2001
Access and AP Management
Gateway
Works Well With
1. RJ-45 Port
2. NType Antenna
AMG-2100
Gigabit Access and AP
Management Gateway
1 2
Product Overview
The LevelOne WAB-3003 108Mbps 11g Outdoor
PoE AP is a 500mW Wi-Fi 802.11b/g device for long
range wireless transmission. Its rugged IP68-rated
metal housing is weatherproof, watertight and rust
resistant, making it an ideal solution for deployments
in harsh conditions, such as outdoor or industrial
environments.
High-Power Signal and Long-Range Coverage
When in AP mode, WAB-3003 operates as an AP
station with wall-penetrating high-power signal and
long-range coverage to better serve Wi-Fi clients. In
addition, it can be set up as a WDS-mesh mode by
establishing multiple WDS links to bridge neighbor
access points together.
Business-Class Security and Multiple-SSID/VLAN
Tagging Support
Coming with business-class security, WAB-3003 is also
an ideal for enterprise applications when operates

Wireless Bridges/Access Points
www.level1.com
I
one world_one brand_one level_
3
Technical Specication
Wireless Radio
Frequency band: 2.4 GHz
Modulations:
(1) 802.11b: DSSS (CCK, DQPSK, DBPSK)
(2) 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
Channels:
(1) USA (Channel 1~11)
(2) Japan (Channel 1~14)
(3) Europe (Channel 1~13)
Data rate with auto fallback:
(1) 802.11b: 1~11Mbps
(2) 802.11g: 6~108Mbps
Receiver sensitivity:
(1) 802.11b: 11Mbps@-89dBm
(2) 802.11g: 54Mbps@-74dBm
RF max. transmit power:
US version: 500 mW; EU version: 100 mW
Multiple Operating Modes
Wireless architecture:
(1) AP mode
(2) WDS repeater mode (WDS Bridge) Supporting up to 8
WDS links per AP
(3) Universal repeater mode (MAC NAT) Acting as AP and STA
client simultaneously
(4) CPE mode (Client gateway)
Gateway Features in CPE Mode
- Built-in NAT mode: To support IP sharing on the LAN side for
multiple users (subscribers) to get access to the Internet
- Built-in DHCP server for issuing local IP addresses
- Built-in DDNS/DNS client
- Bandwidth management: To limit the uplink and downlink
throughput
- Client connection control: For WISP’s operator to remotely
suspend or resume the service for subscribers at the CPE
- IP/Port forwarding and DMZ
General Access Point Features
- Number of VAP (ESSID): 8
- Number of associated clients per VAP: 32
- Setting for maximum number of associated clients
- Beacon interval: Adjustable to best adapt to the deployment
environment
- Auto fallback: Data rate for long distance communication in
noisy environments
- IAPP: To provide a faster roaming capability for the stations
among dierent APs nearby
- 802.11g protection: Not to be aected with surrounding
existence of 802.11b stations
- RTS/CTS and fragmentation control
- ACK timeout support
- Adjustable transmission power: 5 levels
- Wireless site survey: For scanning the surrounding access
points for connection
- Supports IEEE 802.11e WMM and QoS within WDS Link
Security
- Data encryption: WEP (64/128/152-bits), WPA/WPA2 with TKIP
or AES-CCMP with key's refreshing period setting
- User Authentication: WEP, IEEE 802.1X, WPA-PSK, WPA-RADIUS,
MAC ACL, MAC authentication using RADIUS with built-in
802.1X Autjenticator
- Supports IEEE 802.11 mixed mode; open and shared key
authentication
- Hidden ESSID: Broadcast SSID enable / disable
- Station Isolation : All associated stations can not communicate
with each other when enabled
- Supports AES data encryption over WDS link
- Built-in Layer 2 Firewall, blocking Dynamic ARP Inspection &
DHCP Snooping
Administration
- Software one-button-click to reset factory defaults
- Web-based management interface with remote conguration
management and rmware upgrade capabilities
- Utilities for system conguration backup and restoration
- Two administration accounts in CPE mode:
(1) “root” for the WISP administrator, who can change all
settings including bandwidth limit
(2) “admin”for the local administrator, who can view all
settings and change only some preferences
- SNMP MIBII support (v1/v2c)
- NTP time synchronization
- Watch dog: Auto recovery while detecting system fault
- Syslog client
- Supports Event Log and SYSLOG reporting to external server
- Supports RADIUS accounting and accounting update
- Supports statistics on total transmission encountered and
ransmitting error occurred
Hardware and Environment
- Metal case: Weather proof, compliant with IP68 Standard
- LAN Port: 1 × 10/100 Base-TX Ethernet with PoE
- N-type(female) connector for external antenna
- LED Indication: Power x 1; Ethernet x 1; Wireless x 1, Wireless -
- Signal Strength x 3
- PSE for PoE: DC 48V/0.4A
- Form Factor: Wall or Pole Mountable
- Dimension (W x D x H): 6.5” x 3.8” x 1.9” (165 x 96 x 48 mm)
- Weight: 1.6 lbs (0.72 kg)
- Operation Temperature: -30 ~ +70 °C (-22 ~158oF)
- Storage Temperature: -40 ~ +85 °C (-40~185 oF)
- Operation Humidity: 100% maximum (Non-condensing)
- Storage Humidity: 100% (Non-condensing)
Certications
FCC, CE, IP68, RoHS compliant

4
Order Information WAB-3003: 108Mbps 11g Outdoor PoE AP
Package Contents WAB-3003, Power Injector, CD Manual, Quick Installation Guide
Product Diagram
Internet xDSL xDSL Internet
WAB-3003
AMG-2001 PoE Switch
WAB-3003WAB-3003
AP Mode
WDS Mode
WAB-3003WAB-3003WAB-3003

Wireless Bridges/Access Points
www.level1.com
I
one world_one brand_one level_
5
Optional Accessories
ANC-4230
400 Series N plug to N plug Cable
3m
ANC-2210
200 Series N plug to N plug Cable
1m
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved. V1.0