LevelOne WAP-6002 User manual

1
LevelOne
WAP-6002
150Mbps NWireless Access Point
Quick Installation Guide
English
Português
Deutsch
Svenska
Français

Español
繁體中文
Nederlands
한국어
Dansk

Italiano

Polish
V1.0

2
Table of Contents
English ......................................................................................... 3
Deutsch...................................................................................... 10
Français ..................................................................................... 17
Español ...................................................................................... 24
Nederlands................................................................................. 31
Dansk.......................................................................................... 38
Italiano........................................................................................ 45
 .................................................................................... 52
Português .................................................................................. 59
Svenska...................................................................................... 66
 ............................................................................... 73
繁體中文 ...................................................................................... 80
한국어.......................................................................................... 87
...................................................................................... 94
Polish........................................................................................ 101
Please note the default settings listed below.
Default Settings
IP Address
192.168.0.1
User / Password
admin / password
Wireless Mode
Enable
Wireless SSID
LevelOne
Security
None
This guide covers only the most common situations. All detailed
information is described in the user manual.

3
English
Installation
1. Please connect the WAP-6002 to the LAN-Port of your PC.
Power-On the WAP-6002.
2. Installation is now completed. You can begin to configure the
WAP-6002.

4
Check Your Network Settings to login web UI
Please make sure your PC has the same IP segment (192.168.0.x)
same as WAP-6002 to login web UI.



Select the 
Click on the Properties button. You should then see the
following screen and make sure you have set the same IP
range.

5
Configuration
1.Open your WEB browser (Internet Explorer is recommended).
Then enter: http://192.168.0.1
2. Enter the Username and Password when prompted.
Defaults:
Username: admin
Password: password

6
3. Select the preferred language.
For your information(no set-up necessary) This is for
Access Point(AP) mode setting only. Please refer to
user manual for other operation modes.

7
4. To set SSID, click Mode..
Then click Configure SSID.

8
Select the security settings from scroll bar of Security
System. Please refer to user manual for advanced
security settings.
5. Please reconnect WAP-6002 LAN port to your


9
6. Please reset IP settings to your previous
settings and make 
with your network.
The configuration of WAP-6002 is finished.

10
Deutsch
Installation
1. Bitte verbinden Sie den WAP-6002 mit dem LAN-Port an
Ihrem PC und stellen die Stromversorgung des WAP-6002
sicher.
2. Die Installation ist abgeschlossen. Sie können nun damit
beginnen, das Gerät zu konfigurieren.