LevelOne WAP-3000 User manual


11g Wireless Access Point WAP-3000
Product Overview
The LevelOne WAP-3000 11g Wireless Access
Point acts as a bridge between wired Ethernet
and Wireless 11b/g networks for wireless clients
to access available wired and wireless networks.
Multiple Operation Modes
The WAP-3000 supports AP, AP Client, WDS
bridging and Repeater wireless operation
modes for exible deployment and use within
a standard Local Area Network. For standard
operations, the WAP-3000 connects to a LAN,
broadband ADSL router or network switch and
provides instant network access to connected
wireless clients. With WDS+AP mode the
WAP-3000 is able to act as a bridge between
two or more networks, combining them into a
single network to provide wireless users with
access to both networks. In Repeater mode, the
WAP-3000 extends the wireless area network to
different locations.
Robust Wireless Security
The WAP-3000 provides 64/128-bit WEP
encryption as well as WPA, WPA2 secured
connectivity for securing the Wireless Area
Network and to prevent unauthorized access.
Plug-and-Play Expansion of Home/Ofce
Network
The LevelOne WAP-3000 Wireless AP is an
easy to install “plug-and-play” access point
with an easy to use Web-based user interface.
The WAP-3000 requires little set-up and
conguration and features an LED display for
quick monitoring of network errors and activity.
Key Features
- IEEE 802.11b/g compliant Wireless Access Point
suitable for extending an existing LAN
- Features a 1-port Fast Ethernet interface
- Provides a wide area coverage range
- Features WPA, WPA2, 64/128-bit WEP
encryption for a secured wireless network
- Supports multiple wireless operation modes
- Full LED display panel for error detection and
network monitoring
- Compact design for desktop or wall-mounting
- Plug-and-Play enabled for easy setup and
conguration
- Web-based conguration interface
WNC-0305USB
54 Mbps Wireless USB Adapter
Works Well With
1. LED Indicators
2. Reset Button
3. LAN Interface
4. Power Port
WPC-0301
11g Wireless CardBus Card
H/W Version: 1
1 2 3 4


Wireless Bridges/Access Points
www.level1.com
I
one world_one brand_one level_
Technical Specication
Product Diagram
Internet
WAP-3000
Router
Standards
IEEE 802.11g, IEEE 802.11b
Network Interface
1x10/100Mbps LAN
Radio Operation
Data Transfer Rate
802.11g: up to 54Mbps
802.11b: up to 11Mbps
Modulation
802.11g: OFDM
802.11b: CCK, QPSK, BPSK
Media Access Control
CSMA/CA with ACK
Frequency Band
2.4GHz ~ 2.4835GHz
Number of Channels
Channel 1 ~ 11 North America
Channel 1 ~ 13 Europe, Japan
Antenna
1 x 2dBi external detachable dipole
Receiver Sensitivity(Typical)
802.11g: 10% PER, -68 dBm @ 54Mbps
802.11b: 8% PER, -81 dBm @ 11Mbps
Transmitter Output Power(Typical)
802.11g: 15dBm
802.11b: 18dBm
Operation Range
Indoor: approx.up to 50 meters
Outdoor: approx.up to 100 meters
Operation Mode
- AP mode
- AP Client mode
- Bridge mode
- Multiple bridge mode
- Repeater mode
Network Security
- WEP-64/128 bit
- WPA
- WPA-PSK
- WPA2
- WPA2-PSK
- Disable SSID Broadcast
- MAC address ltering
Management
- Web-based conguration
- OS Supported: Windows 2000/XP/Vista
Physical Specications
LED
- Power
- LAN
- WLAN
Power Adapter
DC 7.5V, 1A
Temperature
Operating: 0 ~ 40°C
Storage: -25 ~ 70°C
Humidity
10% ~ 95% (Non-condensing)
Dimensions
146mm (L) x 113mm (W) x 32mm (H)
Certications
CE,FCC
Switch
WAP-3000


All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright 2008 Digital Data Communications GmbH. All Rights Reserved.
Order Information WAP-3000: 11g Wireless Access Point
Package Content WAP-3000
Power Adapter
Antenna x 1
LAN Cable
Quick Installation Guide
CD Manual
WAP-3000_SPEC_V1.0