Leviton VerifEye 6000 Series User manual

Series 6000 Multi-Function Panel Meter
Cat. Nos. 60P00, 61P00, 62P00
Installation Manual
PK-A3418-10-00-4A

TABLE OF CONTENTS
1 Documentation ..............................................................................................................................1
2 Hazards and Warnings ..................................................................................................................2
3 Preliminary Operations .................................................................................................................4
4 Introduction ....................................................................................................................................5
5 Installation ....................................................................................................................................14
6 Connection ...................................................................................................................................17
7 Communication ...........................................................................................................................21
8 Configuration ...............................................................................................................................22
9 Use ............................................................................................................................................... 29
10 Alarms ......................................................................................................................................... 30
11 Web Server .................................................................................................................................. 33
12 Characteristics ............................................................................................................................ 34
13 Performance Classes ................................................................................................................. 39
14 Standard Statements and Warranty ........................................................................................... 41

All documentation on the Series 6000 is available on the website at www.leviton.com.
1 DOCUMENTATION
1

2 HAZARDS AND WARNINGS
2
The term “device” used in the paragraphs below refers to the Series 6000. The assembly, use, servicing
and maintenance of this product must only be carried out by trained, qualified professionals.
Leviton shall not be held responsible for failure to comply with the instructions in this manual.
2.1 Risk of electrocution, burns or explosion
• Only duly authorized and qualified personnel may work or install/uninstall the device.
• The instructions are valid together with the specific instructions for the device.
• The device is designed only for its intended purpose as set out in the instructions.
• Only accessories authorized or recommended by Leviton may be used in association with the device.
• Before proceeding with installation, cleaning, disassembly, connection, or maintenance work, the device
and system must be cut off from the mains to avoid electrocution and damaging the system and device.
• This device is not designed to be repaired by the user.
• For any questions related to the disposal of the device, please contact Leviton.
FAILURE TO COMPLY WITH THE INSTRUCTIONS OF THE DEVICE AND THIS SAFETY INFORMATION
CAN CAUSE BODILY INJURY, ELECTRIC SHOCK, BURNS, DEATH OR DAMAGE TO PROPERTY.
Caution: risk of electric shock. Ref. ISO 7000-0434B (2004-01)
Caution: refer to the accompanying documentation each
time this symbol is shown. Ref. ISO 7010-W001 (2011-05)
DO NOT clamp or pull out NON-INSULATED
conductors carrying DANGEROUS VOLTAGE which
could cause an electric shock, burn or arc flash. Ref. IEC 61010-2-032

3
2 HAZARDS AND WARNINGS
2.2 Risk of damaging the device
• To ensure that the device operates correctly, make sure that:
• The device is correctly installed.
• There is a maximum voltage at the voltage measurement input terminals of 520 VAC phase-phase
or 300 VAC phase-neutral.
• There is a maximum voltage at the auxiliary power supply input terminals of 400 VAC.
• The network frequency indicated on the device is observed: 50 or 60 Hz.
• Always connect the TE, TR or CRS current sensors using the recommended connection cables and
observing the maximum prescribed currents.
• When the ambient temperature exceeds +50°C, the minimum temperature rating of the copper cable
to be connected to terminal must be +85°C.
Failure to respect these precautions could cause damage to the device.
2.3 Responsibility
• Assembly, connection and use must be carried out in accordance with the installation standards
currently in force.
• The device must be installed in accordance with the rules given in this manual.
• Failure to observe the rules for installing this unit may compromise the device’s intrinsic protection.
• The device must be positioned within an installation which complies with the standards currently
in force.
• Any cable which needs to be replaced may only be replaced with a cable having the correct rating.
• Despite constantly striving for quality in preparing this manual, errors or omissions are always a
possibility and are not the responsibility of Leviton.
Caution: risk of electric shock. Ref. ISO 7000-0434B (2004-01)
Caution: refer to the accompanying documentation each
time this symbol is shown. Ref. ISO 7010-W001 (2011-05)

3 PRELIMINARY OPERATIONS
To ensure the safety of staff and the equipment, it is vital to read and absorb the contents of these
instructions thoroughly before commissioning.
Check the following points as soon as you receive the package containing the device:
• The packaging is in good condition
• The device has not been damaged during transit,
• The device part number conforms to your order
• The package includes:
- One (1) device equipped with removable terminals
- One (1) line resistor (ref. 4899 0019)
- One (1) Quick Start guide
4

4 INTRODUCTION
4.1 Series 6000 Presentation
The Series 6000 is a compact panel meter (PMD*) with a 96mm x 96mm format. It is designed for
measuring, monitoring and reporting electrical energy. The Series 6000 offers a range of functions
for measuring voltage, current, power, energy and quality. It allows the analysis of a single-phase or
three-phase load.
The Series 6000 has 3 digital inputs (pulse metering, status checking) and 2 outputs (Alarm or
pulses). The standard version of the device has RS485 Modbus communication. Depending on the
models, Ethernet or Profibus communication may also be provided. The Ethernet model also has a
built-in web server.
The connection mode for the current sensors allows quick, easy installation. Their automatic
identification (type and rating) by the Series 6000 significantly reduces the risk of errors during
installation. In addition, this approach, based on combining the sensor with the meter, means the
overall accuracy of the Series 6000 + Current sensor measurement chain can be guaranteed for all
values measured.
The product is configured from the display or via the Easy Config software. The measurements can
be accessed via the WEBVIEW web server, enabling real-time monitoring of the electrical values and
reporting of the energy data.
*PMD: Performance Measuring and Monitoring Device in accordance with IEC 61557-12.
5
4.1.1 Range
Series 6000
Ref. 60P00 : Model with Modbus communication
Ref. 61P00 : Model with Modbus + Ethernet communication
Ref. 62P00 : Model with Modbus + Profibus communication

6
4 INTRODUCTION
4.1.2 Principle
Current sensors (CTS and CRS models)

7
4 INTRODUCTION
4.1.3 Functions
The Series 6000 boasts numerous functions, including:
• General Measurements
- Electrical values, voltage, current, frequency
- Power, power factor, cos phi and tan phi
- 4 quadrant operation
- Predictive power
- The overall accuracy of the Series 6000 + Sensors measurement chain guarantees
up to class 0.5 (depending on the current sensor used) in power and active energy in
accordance with IEC 61557-12
• Quality
- Current, phase-to-neutral voltage and phase-to-phase voltage
- THD, TDD and harmonics up to level 63 for voltage and current
- Voltage and current crest factor
- Voltage and current unbalance
- K-factor
- EN50160 events (Uswl, Udip, Uint) and current overloads
• Data Log
- Recording of averaged electrical values
- Recording and timestamping of min/max electrical values
• Metering
- Active, reactive, apparent energy total and partial
- Load curves
- Multi-tariff metering
• Alarm
- Timestamped alarms with boolean combination
- Advanced alarms
• Connection to the network
- 3 current inputs with automatic recognition of the current sensors by quick connection
(type RJ12)
- Control of the connection, detection of the current sensors and auto-configuration of the
networks
- Guaranteed overall accuracy of the Series 6000 + Sensors measurement chain in
accordance with IEC 61557-12
• Inputs/outputs
- 3 logic inputs
- 2 logic outputs
• Communication
- RS485 Modbus RTU
- RS485 Modbus RTU and Profibus
- RS485 Modbus RTU and Ethernet (Modbus TCP, BACnet)
• Web Server
- Embedded Web Server for the Series 6000 Ethernet model