Leviton EZ-MAX Plus 16 User manual

(=0$;3OXV
4XLFN6WDUW*XLGH
(=0$;3OXV5HOD\3DQHOV
6RIWZDUH5HYLVLRQDQGDERYH
WEB VERSION

EZ-MAX Plus Quick Start Guide Page 2
QUICK START OVERVIEW
Overview
This EZ-MAX Plus Quick Start Guide assumes that you have
already installed your EZ-MAX Plus relay cabinet. This guide also
assumes you have read and familiarized yourself with the EZ-MAX
Plus Programmer Guide.
This guide covers an abbreviated version of the topics listed
below. See the EZ-MAX Plus Programmer Guide for complete
details and instructions on all topics.
•Time and Date—setting the time and date on your relay
cabinet.
•Set All Relays—globally configuring all relays in your
cabinet.
•Blink Warn Timer—configuring the blink warn timer
settings.
•Scheduler—creating a schedule of events.
•Configuring Inputs—configuring low voltage inputs
(occupancy sensors, photocells and switches) and digital
inputs.
EZ-MAX Plus QuickStart.book Page 2 Thursday, January 22, 2009 1:55 PM
WEB VERSION

EZ-MAX Plus Quick Start Guide
Page 3
EZ-MAX Plus QuickStart.book Page 3 Thursday, January 22, 2009 1:55 PM
WEB VERSION

EZ-MAX Plus Quick Start Guide Page 4
Setting the Time and Date
SET TIME
You can change the following fields in the Time display:
•12 or 24-hour clock
•Hours
•Minutes
•AM or PM
•Daylight Savings Time Mode:
Step 1: Press the MENU button.
Step 2: Press until the display reads as shown below,
then press SELECT/SAVE.
Step 3: Press SELECT/SAVE.
The display will show the current setting for the time.
Step 4: Use to navigate through the fields. Use to
change the settings for each field. For example, use
to change the clock from a 12-hour clock to a 24-hour
clock:
MAIN MENU SELECT
SET TIME/DATE
MAIN MENU SELECT
SET TIME
SET TIME 12 HOUR
4:46PM D: OFF
SET TIME 24 HOUR
16:46S D: US
EZ-MAX Plus QuickStart.book Page 4 Thursday, January 22, 2009 1:55 PM
TIME/DATE
WEB VERSION

Setting the Time and Date
EZ-MAX Plus Quick Start Guide
Page 5
Step 5: Press SELECT/SAVE when you have finished editing the
fields.
SET DATE
Step 1: Press the MENU button.
Step 2: Press until the display reads as below, then press
SELECT/SAVE.
Step 3: Press until the display reads SET DATE, then press
SELECT/SAVE
The display will show the current setting for the date, and the
active field will blink.
Step 4: Use to navigate through the fields. Use the
numeric keypad to change the settings for each field.
Step 5: Press SELECT/SAVE when you have finished editing the
fields.
SET ASTRO CLOCK
Set Astro Clock by City
Follow the steps below to set the Astro Clock by using a quick city
code. See “Quick Codes for 101 Major Cities” on page 32 to see if
your city or a city near you is listed.
MAIN MENU SELECT
SET TIME/DATE
MAIN MENU SELECT
SET DATE
SET DATE MON
12/22/2008
EZ-MAX Plus QuickStart.book Page 5 Thursday, January 22, 2009 1:55 PM
WEB VERSION

EZ-MAX Plus Quick Start Guide Page 6
Step 1: Press the MENU button.
Step 2: Press until the display reads as below, then press
SELECT/SAVE.
Step 3: Press until the display reads as below, then press
SELECT/SAVE.
Step 4: The display should now read as below. Press SELECT/
SAVE.
Step 5: Use the numeric keypad to enter the number that is
listed next to your city name (i.e. 55 for Las Vegas, NV),
and then press SELECT/SAVE.
MAIN MENU SELECT
SET TIME/DATE
MAIN MENU SELECT
SET ASTRO CLOCK
SET ASTRO CLOCK
CITY
LAS VEGAS
NV
EZ-MAX Plus QuickStart.book Page 6 Thursday, January 22, 2009 1:55 PM
TIME/DATE
WEB VERSION

Setting the Time and Date
EZ-MAX Plus Quick Start Guide
Page 7
Set Astro Clock by Longitude/Latitude
Make sure you have the following information for your city before
you begin: current sunrise time, current sunset time, latitude.
This information can be found at www.srrb.noaa.gov/highlights/
sunrise/sunrise.html.
Step 1: Press the MENU button.
Step 2: Press until the display reads as shown below
Step 3: Press until the display reads as shown below, then
press
SELECT/SAVE.
The display should now read:
Step 4: Press until the display reads SUN/LAT, then press
SELECT/SAVE.
Step 5: You will now be prompted to set the Sunrise (SR), Sunset
(SS) and Latitude (LAT) for your location. The active field
MAIN MENU SELECT
SET TIME/DATE
MAIN MENU SELECT
SET ASTRO CLOCK
SET ASTRO CLOCK
CITY
SET ASTRO CLOCK
SUN/LAT
EZ-MAX Plus QuickStart.book Page 7 Thursday, January 22, 2009 1:55 PM
WEB VERSION

EZ-MAX Plus Quick Start Guide Page 8
will flash. Use the key to navigate between fields.
Use the numeric keypad to enter in the values.
Step 6: Press the SELECT/SAVE button when you have finished
editing the fields.
SR=07:01A
SS=08:25P LAT=45
EZ-MAX Plus QuickStart.book Page 8 Thursday, January 22, 2009 1:55 PM
TIME/DATE
WEB VERSION

Setting the Time and Date
EZ-MAX Plus Quick Start Guide
Page 9
EZ-MAX Plus QuickStart.book Page 9 Thursday, January 22, 2009 1:55 PM
WEB VERSION

EZ-MAX Plus Quick Start Guide Page 10
Globally Configuring Relays
SET ALL RELAYS
Use the SET ALL RELAYS menu item to configure all of your
relays at once. Changing settings in this menu will change the
relay type for ALL relays in the cabinet, even if you have already
specified a different relay type to an individual relay.
See the EZ-Max Plus Programmer Guide for details on how to
configure individual relays.
Follow the steps below to configure the three global settings for
your relays.
Step 1: Press the MENU button.
Step 2: If you aren’t at the default screen, press or until
the display reads as shown below, then press
SELECT/SAVE.
Step 3: Press until the display reads SET ALL RELAYS, then
press SELECT/SAVE.
Step 4: Press or to toggle through the relay type choices.
Set your global relay type and press SELECT/SAVE.
The system automatically saves the configuration change you
just made and displays the next menu item.
MAIN MENU SELECT
SYSTEM SETTINGS
SYSTEM SETTINGS
SET ALL RELAYS
ALL RELAY TYPE
LATCH (DEFAULT)
EZ-MAX Plus QuickStart.book Page 10 Thursday, January 22, 2009 1:55 PM
SET ALL RELAYS
WEB VERSION