Lexing lx-hs06 User manual

Homesecurityalarm systemLX-HS06
Instruction
Briefintroduction
LX-HS06isasetofentirelynewEnglishhomesecurityalarmsystem,ituses
advancedMCU controland SMDtechnology.itinnovatemultipletradenewtechnique.It
hasintegrationhigh,reliabilitygood,technologyadvanced,functionmightiness and
operation simpleetc.feature.Itusedabroad inbank,organ,enterprise,army,villaDom,
and small zonehousing networkalarm.
Technicalparameter
TheMain:
Power:12VDC(poweradapterconvert)
Standbypower: DC12V(chargeablebattery)
Working frequency: 433MHz 315MHz
Remotecontroldistance:≥30m
Staticcurrent: 150mA
Batterygroup waiting time: 90min
Factorysetting:
Systempassword:000000 Systemdelay:0sec
Userpassword: 1234 Alert: 300sec
Code: 0000 Dialtimes: 3
Report: no reportVibrant ring times: 8
SensoremitterLX-AL8:
Working power: DC9V(cascading battery)Staticcurrent: 30μA
Sensedistance: 12mSenseangle:110°
Installing height:2m
4-keyremotecontroller: Working power: DC3V(lithiumbattery)
Single-keyremotecontroller: Working power: DC12VA23 battery
Doormagnetism(LX-DM1): Working power: DC12VA23 battery
Siren: powerDC12V, current: <800mA
Basisconfiguration
Optionunit
Smokealarm(LX98-RF LX728-RF) wiredsensor（glassbreakLX-AL5、PIRLX-AL6, PIR&glassbreakLX-AL7,doubledetectors
PIRLX-AL11）、wiredorwireless PIRLX-AL9!
Function
n 4+8 armzone
LX-HS06 has4wiredarmzonesand 8wireless armzones.
n Englishdisplay
Itsoperation and setting all bedisplayedbyEnglishand operation ismoreconvenient and shortcut.
n Function mightiness
Possessing multipleprogrammablefunction setting, operation and setting issimple, standbypowerfor24 hours.
n Onekeyoperation
You needonlypress [AWAY]or[HOME]keytosetarm/stay,you can alsouseremotecontrollertoarm/disarm.Underany
statedisarming needonlypressing userpassword.
n Numeral speech
Innersetnumeralspeechware,andhas8sectionnumeralspeeches.Duringoperation,itprompt: Systemarm , “system
disarm ;during alarming,itcanidentifydetectorautomaticallyand transmitalarminfotoreceivingalarmtelephone,like “fire
alarm , “gasalarm , “securityalarm , “helpalarm .
n Passwordpopedom
Ithas[systempassword]and [userpassword],thetwopasswordscanbesetafterentering alarmsystembutrespective
function popedomisdifferent, that isconvenient formanagerand operatortocontrolalarmsystemreligiously.
n Long-distance remotecontrol
Thealarmcan becontrolledbykeypad andremotecontroller,bytelephoneline,itcan belong-distancecontrolled,and fulfill
arm/disarm/monitorhearing function.
themain（DC12Vstoragebatterygroup include）1pcs
Poweradapter
(Input 230VAC,output 12VDC,current 1000mA) 1pcs
4-keyremotecontroller（batteryinclude）2pcs
single-keyremotecontroller（batteryinclude）1pcs
SensoremitterLX-AL8（batteryinclude）1pcs
DoormagnetismLX-DM1（batteryinclude）2pcs
Siren1pcs
Telephoneline 1pcs

n Intelligentstudy.
Wireless detectorstudyisverysimple.Thestudytimeneedno 1sec.
Connectionline
1. connect phoneline: connect themaintoworkablephonepath. NOTE: if not connect phoneline, themainwill give"path
trouble"prompt.
2. Connect poweradapter: theadapterrequires: input 230VAC, output 12VDC, and current 1000mA. During ACpowerison,
standbybatterywill bechargedautomatically. WhenACpowercut off, theproduct works bystandbybatteryentirely.
3. conncetion terminal:
·poweroutput terminal[terminal1（+）、2（-）]
output DC12Vpower, can powersupplyforLX-AL6.
·sirenterminal[terminal3（-）、 4 （ + ） ]
sirenpower:DC12V, current:800mA
·detectorsignalterminal[terminal5（6，7，8）、 GND(2,3)]
themainhas ４wiredarmzone:［５－GND］is01 zone；［６－GND］is02zone；［７－GND］is03zone；［８－GND］is04 zone.
Functionsetting
enterprogramming
Themain’ssystempasswordis[000000],allsettingsand modifying
ofthemainmustbedoneviasystempassword.Theuserpasswordis
[1234].
Attention:thesystempasswordisthehighestgrade;onlyviaityou
can modifytheuserpasswordandall specificationof themain.Sowhen
you modifythesystempassword,you mustrememberthenew
passwordfirmly.
Afterconnectionlineright,switchon power,thePOWERledlight;
whenthemainisinarmstateorguardst,theARMledlight. LCD display
themain’sstate(“ArmSt or “GuardSt or “DisarmSt )，that indicateit isnormal.
Attention:whenLCDdisplay “ArmSt or “GuardSt , ifyou needtoprogram,youneedtoinput userpasswordtodisarmthe
main, whenLCD display “DisarmSt , you can start toprogram.
Whenthemainisindisarmstate(disarmst), press the SETkeyon keypad,LCDdisplay<inputlevel>andremindyou input
thesystempassword, press #keytoenterthemainmenu.
POWER
ARM
ABC 0 #
8TUV 9WXYZ
4GHI 5JKL 6MNO
3DEF2ABC1AWAY
HOME
SET
MEDICAL FIRE HELP
7PQRS
Disarm St
Input level
******
1.Sys 2.Zone
3.Setup 4.Study
siren
controllerinnerPCB
phone line
13O N P U L SE
L E D O F F
-4
-6
0
4
2
-2
TAMPER
+
_RELAY
LX-AL6 innerPCB
_12VDC+
poweroutput
poweradapter
TAMPER RELAY

1.Level
2.Code
3.Report
4.Delay
01
02
03
04
05
…
12
1. Instant
2.Delay(zone)
3.24 HR
4.Bypass
1. Alert
2.Home
3.Call
4.Delhome
1.Tele1
2.Tele2
3.Tele3
4.Tele4
functionmenu
Armstate
1. Sys
2. Zone
Disarmstate
3. Setup
4. Study
Guardstate
NOTE:whenprogramming, the[*]keyisforreturning topreviousmenu, and [#]keyisforconfirming.
• systemsetting1.sys
—Passwordmodifying 1. level
1> modifysystempassword<sys level>
entermenu 1.level→1.syslevel→LCD display “inputsys level ,input6-bitpasswordand press #keytoconfirm. Thesystemsave
onlythelast password, pleaseremembernewpasswordfirmly!
2> modifyuserpassword<userlevel>
entermenu 1.level→2.userlevel→LCD display “inputuserlevel ,input4-bitpasswordandpress #keytoconfirm.Thesystem
saveonlythelast password, pleaseremembernewpasswordfirmly!
—codesetting<centernetworkcode>2. codeno thesetting temporarily.
—report setting3.report
Entermenu 3.report→LCD display:
Selecting 1isreport tocenter, selecting 2isno report.
Attention: whenneedsaving telephoneexpenseorthealarmneedn’t benetwork, you can not set it.
1.Armreport
2.No report
1.Smoke
2.Gas
3.Panic
1.Tel
2.Dial
3.Vibrantring
1.Remote
2.Armzone
3.Del
Wired
Wireless
1.Sys level
2.User level
Inputsyslevel
******
Input user level
****
1．Arm report
2．No report
1.level 2. code
3.report 4.delay
1.Sys 2.Zone
3.Setup 4.Study
Press 1

—delay<systemdelay>4.delay
Entermenu 4. relay→LCD display:
Afterinputting press #keytoconfirm.** isdelaytimeforawayhomewhenarming, it can set to00~99sec.
arm zonesetting 2.zone
Entermenu 2. zone→LCD display:
**is01~12armzone,afterinputtingpress#keytoconfirm,and thenaccordingtoyourneedselect[instant], [delay], [24 hours],
[bypass] armzonetype.
When select[1.instant]，afteritreceivesignal,themainwill dialimmediately,andthecorresponding alarminformationis “security
alarm ;
Whenselect[2.delay]，afteritreceivesignal, themaindialaftersometime, and thecorresponding alarminformation is “security
alarm ;
afterselect[3.24Hr], accordingtoyourneedselect[1.smoke]，[2.gas]，[3.panic]，thecorrespondingalarminformationare"firealarm
″，"gasalarm″，"helpalarm″separately.
Whenselect [ 4.bypass], thearmzonedo not work.
setting 3.setup
—sirenalarmtimesetting1. alert
entermenu 1.alert→LCD display:
Afterinputting press #keytoconfirm,*** issiren’salarmdelay, can set to000~999sec, factoryset to300sec.
—guardsetting2. home
entermenu 2.home→LCD display:
Afterinputtingpress #keytoconfirm,**isthearmzoneNO.guarded.When hostisathome,afterhomearm,thesystemwill
ignoretheguardeddetector(forexample: PIRsensor). Sohost can movefreelyindoorand not arising alarming.
—telephonesetting
entermenu3.call→1.tel→LCD display:
1group isnetworkcenternumber, whenno network, you can not set thenumber;
2,3,4group isspeechalarmtelephonenumber.Ifyou needtodeletethenumber,onlysetthenumberto[0]. selectthetelephone
group No.(1-4),LCD display:
*************istelephonenumber, it can set to3~13 bitstelephonenumber.
Input delay
**
Input arm zone:
**
1.instant 2.delay
3.24Hr 4.bypass
1.Smoke 2.gas
3. Panic
Set alarm time
***
Set arm zone NO.
**
1.tel 2.tel
3.tel 4.tel
Input tel NO.
*************
1.Sys 2.Zone
3.Setup 4.Study
Press 2
2.Zone
1.Sys 2.Zone
3.Setup 4.Study
Press 3
1.alert 2.home
3.call 4.del home

—dialing setting
entermenu3.call→2.dial→LCD display:
press #keytoconfirm,**isdialtimes.Factorysetis3times;networkcenterisnotlimitedbyit until centertelephonereceiving alarm.
—vibrant ring setting
entermenu3.call→3. vibrant ring →LCD display:
press #keytoconfirm, ** islong-distancecontrolling vibrant ring times, can set to01~99 times, factoryset is8times.
—deletehome4.delhome
Deleteguardedarmzone, if usethestayfunction next time, you needreset it.
•study4.study
—studywireless(1.remote, 2.armzone)
Setting: ** +#
Attention:**isremotecontrollerNO.orarmzoneNO.,remotecontroller[1~4], andarmzone[05~12].Selecttheremotecontroller
NO. OrarmzoneNO.needing study,and press #keytoconfirm,whenLCD display“bestudying ,triggerremotecontrolleror
detectoronce, and thenstudynext one.
—deletewireless(3.del)
Deletewireless remotecontrollerorwireless detectors.
Functionoperation
4-keyremotecontrol coding
Thisremotecontroladaptsfree coding.Thecodingmethod:tightenoff thebasescrewand
openit, press and holdanyemission keyand theninstall battery, heretheLEDflash
indicating it iscoding. Thecoding isconfirmedwhenyou loosenthekey.(if you find remote
controllershaverepeat codlings, you can re-codeaccording abovemethod).
arm, disarm
Arm: press the[Awayarm]keyorthe[AWAY]keyon keypad,themaingive “systemarm
prompt sound and LCD displays “armst ;
Disarm: press the[Disarm]keyorpress userpasswordonkeypad,themaingive “system
disarm prompt sound and LCD displays “disarmst ;
HomeArm: press the[Homearm]orpress [HOME]keyon keypad,themaingive “system
arm prompt sound and LCD displays “guardst .
helpalarm
Remotecontrol:pressthe[helpalarm]keyonremotecontroller,themaindialandthenthesirenalarm,
themaingive “helpalarm alarminfo.
Keypad operation:press and holdMEDICAL/FIRE/HELPkeyfor3sec( “DI-DIDI promptsoundwillbe
heard),themaindialandthenthesirenalarm,themainseparatelygive medicalalarm, “firealarm
“helpalarm alarminfo.
keypadoperation
AWAY:AWAYarmkey
HOME: HOMEarmkey
SET: programming setting,[*]: returntothepreviousmenu whenprogramming.
[#]: Programming confirmkey.Keyisuseless.
speechreceiving alarm
When alarmtelephoneiscalled,pickup telephonehearalarminfo.And thenpress “#keytoconfirmand ring off, themainstop
dialing thetelephonenumber; Otherwiseit dialalarmtelephoneaccording todialtimespre-set.
long-distance control
Bylong-distancetelephoneorhand calldialthetelephoneconnectedwiththemain.Aftervibrantring forthetimespresetand
telephoneprompt “inputpassword,press1toarm,press2todisarm ,inputoperationpassword,press #key,enterlong-distance
control: press 1toarm, press 2todisarm, press 3tomonitorhearing, press 4toring off.
Installing
1．Untightenthescrewtoopentheunit (see fig.1);
2．Pullinwiresthroughtheout-lineholeonbottomcoverand thenconnectwiretoterminalsonPCBaccordingtoconnectionline
diagram.
3．Fixing thebottomcoveron neededposition(see fig.2)
Set dial times
**
Input ring times
**
1.Sys 2.Zone
3.Setup 4.Study
1.remote 2.arm zone
3.del
Press 4
help alarm
helpalarm
awayarm
homearm
disarm pushup
Z

4 ． Linkup front coverand tightenthescrews(see fig.3)
SensoremitterLX-AL8
—Jumpersetting (like rightfigure)
·Senseoncetoemit: aftersensingonce,the
sensoremit signal
·Sensetwicetoemit:aftersensingtwice,the
sensoremitsignal, Thissettingenhanceits
preventingfalse-alarmandpreventing-pet
function.
Note:theemitintervaltimeisatleast
15sec.thatmeans:sensetomakeit emit,after
atleast15secsenseitagain, it willemit again.
—Test
·press thearmkeyof remotecontrollerorthemain, set themaintoarm.
·set thejumperon neededposition;
·switchon 9Vbattery, after60sthesensorenterstableworking state;
·according tothestudying wireless method select studyarmzone(2.armzone)tostudyLX-AL8;
·movealongthetangentof thelens,thesenseLEDlight andthenitemitsignaltothemain,theemissionLEDlight. thesiren give
alarmand themaindial.
—Attention
·Low-batteryLED: When batteryenergyisbelow7V, thelow-batteryLEDwill flashonceasecondandremindyou replacebattery.
·Avoidinstalling theunit on metalbase;
·Avoidinstalling theunit wheresun shineortemperaturechangeobviously, forexample: airconditioning, heateretc.
DoormagnetismLX-DM1
·Installmagnetismandemitteronuprightpositionofdoorlock, thedistancebetweenthem
is3mm~5mm and triangleon emitteraimat triangleon magnetism(likeright figure);
·install DC12Vbatteryintoemitterand thenclosethebatterylid;
·according tothestudying wireless method selectstudyarmzone(2.armzone)tostudy
LX-DM1;
·press thearmkeyof remotecontrollerorthemain, set themaintoarm.
·Open door,theemitteristriggeredanditsLEDlight, thenemitsignaltothemain,thesiren
alarmand themaindial；
·tamperdesign:Undertheconditionthatthetriangleonemitteraimat triangleon magnetism,
whenthebatterylidisremoved, it will emit signaltothemain.
·Attention:
1 ． Avoidinstalling theunit on metalbase;
2 ． Themagnetismshouldbeon theleft of theemitter(likefollowing figure)
Warnning:
1.Noslideall numeralsoftheDIPswitchtoONpositionsimultaneously
whencoding!
2.you shouldnotuse numeral 1”on DIPswitchwhencoding.
Incorrectposition
Correctposition
Door
Doorframe
Doorlock
Fig. 1
Fig. 2
Fig. 3
out-linehole
78
160
AUTO
DIPswitch SenseLED
PIR
Jumper
AU TO / 1 AUTO / 1
1
EmitLED
Sense
onceto
emit
Sense
twiceto
emit
Low-batteryLED