Lexmark CS410 series User manual

Menu map
Menus list
Note: Some menus are available only in select printer models.
Supplies Paper Menu Reports Network/Ports
Cyan Cartridge
Magenta Cartridge
Yellow Cartridge
Black Cartridge
Waste Toner Bottle
Black or Color Imaging Kit
Maintenance Kit
Default Source
Paper Size/Type
Configure MP1
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Names
Universal Setup
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
Profiles List
Print Fonts
Print Directory
Print Demo
Asset Report
Active NIC
Standard Network or Network [x]
Standard USB
SMTP Setup
Security Settings Help Option Card Menu
Miscellaneous Security Settings
Confidential Print
Disk Wiping
Security Audit Log
Set Date and Time
General Settings
Flash Drive
Print Settings
Print All Guides
Color Quality
Print Quality
Printing Guide
Print Defects Guide
Information Guide
Supplies Guide
Note: A list of installed DLEs (Download Emulators)
appears.
1This menu item appears when a 650-sheet duo tray is attached.
Using the printer control panel
31 24
876
910
5
Use the To
1Display •View the printer status.
•Set up and operate the printer.
2Select button •Select menu options.
•Save settings.
Menu map
Page 1 of 2

Use the To
3Arrow buttons Scroll through menus, or settings on the display.
4Keypad Enter numbers, letters, or symbols.
5Sleep button Enable Sleep mode or Hibernate mode.
Notes:
•Pressing any hard button, attaching a device to a USB port, sending a print job, or performing a power-
on reset with the main power switch wakes the printer from Sleep mode.
•Pressing the Sleep button or the power switch will cause the printer to wake from Hibernate mode.
6Stop button Stop all printer activity.
7Back button Return to the previous screen.
8Home button Go to the home screen.
9Indicator light Check the status of the printer.
10 USB port Connect a camera or flash drive to the printer.
Understanding the colors of the indicator and Sleep button lights
The colors of the indicator and Sleep button lights on the printer control panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light Printer status
Off The printer is off or in Hibernate mode.
Blinking green The printer is warming up, processing data, or printing.
Solid green The printer is on, but idle.
Blinking red The printer requires user intervention.
Sleep button light color and its corresponding printer status
Sleep button light Printer status
Off The printer is idle or in Ready state.
Solid amber The printer is in Sleep mode.
Blinking amber The printer is waking from or entering Hibernate mode.
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in pulsing pattern
The printer is in Hibernate mode.
Menu map
Page 2 of 2