LG LW1010ER User manual

www.lgappliances.com
LG
Window-TypeAirConditioner
MODELS: LWIOIOER LW1210ER
after
rentilador de
para el futuro

FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find the numbers on a label on the side of the
product.
Dealer's Name
Date Purchased
• Staple your receipt to this page in the event you need it
to prove date of purchase or for warranty issues.
aO READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little preventive
care on your part can save you a great deal of time and
money over the life of your air conditioner.
You'll find many answers to common problems in the chart
of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for
service at all.
PRECAUTION
•Contact an Authorized Service Center for repair or
maintenance of this unit. Call 1-800-243-0000 to
locate the nearest ASC.
•This air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
•If the power cord requires replacement, have an
Authorized Servicer install an exact replacement part.
•Installation work must be performed in accordance
with the National Electric Code by qualified and
authorized personnel only.
2Room Air Conditioner

SafetyPrecautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
[] Incorrect operation due to ignoring instructions will cause harm or damage. The seriousness
is classified by the foflowing indications.
[] Because of the weight of the product, it is recommended that you have a helper to assist in
the instaflation.
,WARNING This symbol indicates the possibility of death or serious injury. /
,_CAUT_ON This symbol indicatesthe possibility of injuryor damage to property only.
[] Meanings of symbols used inthis manual are as shown below.
(_) Be sure not to do.
Be sure to follow the instruction.
[] installation . WARNING
•improperassembly or installation may cause
incorrect operation, including injury, fire, and
electric shock hazards. :, _
I
• It may cause fire and electric shock.
it may cause explosion or fire. It may cause electric shock and failure.
Owner's Manual 3

Safety Precautions
mOperation
• Otherwise, it will cause
electric shock or fire. ° itwifl cause electric shock or fire. ON
°it will cause electric shock or
fire.
®
\
° Otherwise it will cause fire
and electric shock accident.
•itwill cause electric shock or
fire.
°itmay cause fire and electric
shock.
•it will cause electric shock or
fire.
•No grounding may cause
electric shock.
• it may cause electdc shock.
®
4 Room Air Conditioner

• The air conditioner must be operated in a
enclosed area to be most effective.
• Itwill cause electric shock or failure of
machine.
Sa_Precaufions
• It may cause explosion, fire, and burn.
0
0
•Installation
• Theyaresharpand may
causeinjury.
• Water may enter the unit and degrade the
insulation. It may cause an electric shock.
CAUTION
• It may cause failure of
appliance or performance
deteriorate.
• If the outer case is damaged,
it must be repaired or
replaced immediately.
Leaving it damaged could
result in the air conditioner
falling out of the window,
creating a safety hazard.
®
t"A•
Owner's Manual 5

Safety Precautions
• It may cause injury.
•Operation
•It may cause electric shock
and damage. •It will waste power consumption in vain and it
may cause accident.
• Since the fan rotates at high
speed during operation, it may
cause injury.
• Operation without filters will
cause failure.
• This could injury the pet or
plant.
• The appearance of the air
conditioner may deteriorate,
change color, or develop
surface flaws.
• It is an air conditioner, not a
precision refrigeration system.
• It is not sanitary and could
cause illness or personal
injury hazard.
®
.Thechemicalsinbatteriescouldcauseburnsor
otherhealthhazards. •The chemicaJsin batteries could cause burns or
otherheaJthhazards.
6Room Air Conditioner

BeforeOperation
1. Plug in the power cord properly.
2. Use a dedicated circuit. Overloading the line could create a fire hazard.
3. Do not use an extension cord. See page 11 for more details.
4. Do not start/stop operation by plugging/unplugging the power cord.
5. If the power cord is damaged and requires replacement, have an Authorized
Servicer install an exact replacement part.
1. Being exposed to direct airflow for an extended period of time could be
hazardous to your health. Do not expose occupants, pets, or plants to direct
airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used
together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g.
preserving precision devices, food, pets, plants, and art objects). Such usage
could damage the items.
4. The air conditioner is a consumer comfort appliance, not a precision climate
control system.
1. Do not touch the metal parts of the unit when removing the filter. Injudes can
occur when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can
destroy the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned
off. The fan rotates at a very high speed during operation. There is a
possibility of injury if the unit's power is accidentally triggered on while
cleaning inner parts of the unit.
For repair and maintenance, contact an Authorized Service Center. See the
warranty page for details or call [phone]. Have your model number and
serial number available. They should be written on page 2 of this manual.
Owner's Manual 7

Introduction
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that could cause harm to the
air conditioner.
This symbol indicates special notes.
_k ARN|NG: This appliance should be installed in accordance with the
National Electric Code.
Upper Guide
Cabinet
Front Grille
Air Filter
Horizontal Air Deflector
(Horizontal Louver)
Vertical Air Deflector
(Vertical Louver)
Air Discharge
Air Intake
(Inlet Grille)
Brace
Evaporator --
Control Board
Remote Controller__
Compressor
Condenser
--Base Pan
Power Cord
8 Room Air Conditioner

ElectricalSafety
115V~
/
230V~
r-
Power cord may include a current
interrupter device. A test and reset button is
provided on the plug case. The device
should be tested on a periodic basis by first
pressing the TEST button and then the
RESET button. If the TEST button does not
trip or if the RESET button will not stay
engaged, discontinue use of the air
conditioner and contact a qualified service
technician.
Use Wall Receptacle
©
Standard 125V, 3-wire grounding
receptaclerated15A, 125VAC
Standard 250V, 3-wire grounding
receptacle rated 15A, 250V AC
Standard 250V, 3=wire grounding
receptacle rated 20A, 250V AC
Power Supply
Use 15 AMP. time delay fuse or 15 AMP.
circuit breaker.
Use 20 AMP. time delay fuse or 20 AMP.
circuit breaker.
ELECTRICAL SAFETY
IMPORTANT GROUNDING INSTRUCTIONS
Air conditioner has a three-prong grounding plug on its power supply cord, which must be plugged into
properly grounded three-prong wall receptacle for your protection against possible shock hazard.
Owner's Manual 9

ElectricalSafety
WARNING: This appliance must be properly grounded.
The power cord of this appliance is equipped with a three-prong grounding plug.
To minimize the risk of electric shock, use the plug with a standard three=slot
grounding wall power outlet. If the power outlet does not include a grounding slot,
have a qualified electrician replace the outlet before you use the room air
conditioner.
WARNING: Changing the outlet without making the appropriate wiring
changes will create an unsafe condition that could result in fire or
electrical shock. Refer all such work to a licensed and qualified
electrician.
Preferred method
Ensure proper ground
exists before use
&
WARNING: Do not cut or remove the grounding prong from the power
plug.
WARNING: Attaching the adapter ground terminal to the wall
receptacle cover screw does not ground the appliance unless the
cover screw is metal and not insulated, and the wall receptacle is
grounded through the house wiring.
WARNING: if you have any doubt whether the air conditioner is
properly grounded, have the waft receptacle and circuit checked by a
qualified electrician.
10 Room Air Conditioner

ElectricalSafety
We strongly discourage the use of an adapter due to potential safety hazards.
For temporary connections, use only a UL-listed adapter, available from most
local hardware stores. Ensure that the large slot in the adapter is aligned with
the large slot in the receptacle for a proper polarity connection.
To disconnect the power cord from the adapter, use one hand on each to avoid
damaging the ground terminal. Avoid frequently unplugging the power cord as
this can lead to eventual ground terminal damage.
Temporary method
Adapter Plug_
Metal
Receptacle Cover
Screw
A WARNING: Never use the appliance with a broken adapter.
115VOLT UNIT(LW1010ER LW1210ER)
We strongly discourage the use of an extension cord due to potential safety
hazards.For temporary situations,use only CSA certified and UL listed 3=wire
grounded extension cords,rated 15 A,t25V.
All wiring should be made in accordance with local electrical codes and regulations.
Aluminum house wiring may pose special problems. Consult a qualified electrician.
230,208, and 230/208 VOLT UNITS
These units are equipped with a three-prong grounding plug on the power supply cord, which
must be plugged into a matching properly grounded three-prong waft receptacle for your protection
against possiNe shock hazard. If such an outlet isnot present, one must be installed by a qualified
electrician in accordance with the National Electrical Code and local codes and ordinances.
130 NOT USE AN EXTENSION CORD on 230,208, and 230/208 Volt units.
Owner's Manual 11

Installation
_To prevent vibration and noise, make surethe unit
is installed securely andfirmly
Install the unit where the sunlight does not shine °
directly on the unit. Cooled air I'-r' "_ Heat \\
_ I radiation .
The outside of the cabinet must extend outward for _=__/_ [ i _
at least 12" and there should be no obstacles, such I
as a fence or wall, within 20" from the back of the - - •
cabinet because itwillprevent heat radiation of the ' _
condenser. 0" ,"
Restriction of outside air will greatly reduce the \\ \\ _\\\
cooling efficiency of the air conditioner.
Fence
_lb AUTION: All side louvers of the cabinet must remain exposed to the outside of thestructure.
Install the unit a little slanted so the back is slightly lowerthan the front (about 1/2").
This will force condensed water to flow to the outside.
Install the unit with the bottom about 30"-60" above the floor level.
:All supporting parts should be secured to firm wood, masonry, or metal.
• This unit is designed for installation in standard double
hung windows with actual opening widths from 27"
to 39".
• The top and bottom window sash must open sufficiently
to allow a clear vertical opening of 16" from the bottom
of the upper sash to the window stool.
_J"' _iliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiil
11 27to39__
16" min qt,-,,,
VV,,ou,,,,m c0r' a
Offset
. "_,. V2" to 11/4"
._°°_Exterior
12 Room Air Conditioner

Installation
NO. NAME OF PARTS Q'TY
1 FRAME CURTAIN 2
2 SILL SUPPORT 2
3 BOLT 2
4 NUT 2
5 SCREW (TYPE A) 13
6 SCREW (TYPE B) 3
7 SCREW (TYPE C) 5
8 FOAM-STRIP 1
9 DRAIN PIPE 1
10 FRAME GUIDE 2
11 WINDOW LOCKING BRACKET 1
12 FOAM-PE 1
SCREWDRIVER(Philips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL ]
PREPARATION OF CHASSIS
Remove the screws which fasten the cabinet at both
sides and at the back.
@ Slide the unit from the cabinet by gripping the base pan
handle and pulling forward while bracing the cabinet,
Cut the window sash seal to the proper length.
Peel off the backing and attach the Foam-PE @ to the
underside of the window sash.
Shipping
wS
insertthe Frame Guides into the bottom of the
@
cabinet.
_) insertthe Frame Curtain Q into the Upper Guide and
Frame Guides @.
Fasten the curtains to the unit with 4 Type
A screws ®.
(TypeA)
[!,
Owner's Manual 13

Instaflafion
Open the window. Mark a line on center of the
window stool.
Carefully place the cabinet on the window stool and
alignthe center mark on the bottom front with the
center line marked in the window stool.
Pullthe bottom window sash down behind the Upper
Guide until it meets.
Upper GU_w stool
Front Angle
Window Sash Upper guide
: Do not pull the window sash down tightly that @__
the movement of Frame Curtain ii,: is restricted. Foam-pe
Cabinet//- /--I
Frame Curtain Q
Foam-pe (_
Loosely assemble the Sill Support using the parts
OUTDOOR
Sill SupportQ
Bolt_ Nut@
Select the position that will place the Sill Support t_>
near the outer most point on sill
: Becareful when you install the cabinet
(Frame Guides ,ii,;are broken easily).
Attach the Sill Support ,:_to the cabinet track hole in
relation to the selected position using 2 Type A
screws in each support
Frame Guide
[l, \,
INDO_
Screw(Type A) (_)
bi
Y/////////4 OUTDOOR
14 Room Air Conditioner

Installation
The cabinet should be installed with a very slight tilt
(about 1/2") downward toward the outside
Adjust the bolt and the nut of Sill Support @ for
balancing the cabinet.
Attach the cabinet to the window stool by driving
the screws @ (Type B: Length 16mm (5/8 inch)
and below.) through the front angle into window
stool.
'_ Pull each Frame Curtain Q fully to each window
sash track, and repeat step 2.
Screw(Type B) _)
Sill Support(_
Sill Support (_)
iii
sh track
_ Front Angle
Screw(Type B)@
Attach each Frame Curtain(_ the window sash using
screwsO (Type C).
CAUTION: Do not drill a hole in the bottom
pan. The unit is designed to operate with
approximately 112" of water in bottom pan.
There is no need to add water if the pan is
dry.
Ja
Slide the unit into the cabinet.
_lb CAUTION: For security purpose, reinstall
screws (Type A) at cabinet's sides.
Screw(Type A)
Screw
(Type A)
Cut the Foam-Strip® to the proper length and insert
between the upper window sash andthe lower
window sash.
Owner's Manual 15

Installation
Attach the Window Locking Bracket @ with a Type
C screw _'_. Window locking
bracket @
Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
Pull down the inlet grille and secure it with a Type
A screw _)through the front grille.
Window installation of room air conditioner is
now completed. See ELECTRICAL DATA for
attaching power cord to electrical outlet.
16 Room Air Conditioner

The controls look like this:
Controls
Operating Instructions
POWER
Operation starts when this button is pressed and stops when you press the button again.
FANSPEED SELECTOR
For increased powerwhile cooling, select a higher fan speed. 3 steps: High --Low--Med
_ ON/OFF TIMER
The timer can be set to start and stop the unit inhoudy increments (up to 12 hours).
You will usually use shut-off time while you sleep.
For your sleeping comfort, once timer is set, the temperature setting
will raige 2°F after 30min and once again after another 30min.
OPERATION MODE SELECTOR
Select coolingmode to cool the room.
Select energy saver mode for energysaving operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
Drymode is used to remove humidity from the room without additional cooling.
Once the set temperature is reached,the compressor and circulation fan turns
off. Fanspeed is pre-set and cannot be adjusted.
'_ TEMPERATURE CONTROL
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60°F~86°F
(16°C~30°C).
The unit takes an average of 30 minutes to adjust the
room temperature by I°E
REMOTE CONTROL SENSOR
_ure of electric power, the unit runs as previous setting operation. )
Owner's Manual 17

OperatingInstructions
_AUTION: The Remote Controller will not function properly if strong
light strikes the sensor window of the air conditioner or if there are
obstacles between the Remote Controller and the air conditioner.
Power
Operation starts when this button is pressed and
stops when you press the button again.
Temperature Control
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60°F~86°F
(160C~30°C).
The unit takes an average of 30 minutes to adjust the
room temperature by I°F.
Fan Speed
For increased power while cooling, select a higher
fan speed.
3steps: High-Low-Med
On/Off Timer
The timer can be set to start and stop the unit in
hourly increments (up to 12 hours).
You will usually use shut-off time while you sleep.
For your sleeping comfort, once timer is set,
the temperature setting will raige 2°F after 30min
and once again after another 30min.
Operation Mode Selector
Select cooling mode to cool the room.
Select energy saver mode for energy saving operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
Fan Speed
Timer Mode
i i i
i f
Jii_ ii;!iYilii
Dry mode isused to remove humidity from the room without additional cooling.
Once the set temperature is reached, the compressor and circulation fan turns
off. Fanspeed is pre-set and cannot be adjusted.
How to Insert Batteries
1. Removethe coverfrom the back of the remote /_ Do not use rechargeable
batteries. Such batteries
differ from standard dry cells
in shape, dimensions, and
performance.
Remove the batteriesfrom
the remote controller if the air
conditioner is not going to be
used for an extended length
of time.
®
controller.
2. Insert two batteries.
Be sure of the polarity when installing the
batteries.
Be sure that both batteries are new.
3. Re-attachthe cover.
18 Room Air Conditioner

OperatingInstructions
Air Direction
Airflow can be adjustedbychangingthe directionof the
air conditioner's louvers. This can also increasethe
coolingefficiency of the air conditioner.
Adjusting Horizontal Air Flow Direction
Adjustingthe vertical louvers leftand rightwill
change horizontalairflow.
Adjusting Vertical Air Flow Direction
Adjustingthe horizontal vane up and down will
change vertical airflow. The vane can beadjusted
by nudgingthe backor up anddown of the vane.
Recommended orientation of louvers
Adjust louversto face upwardswhen cooling
to maximizecooling efficiency.
Adjusting horizontal air flow
Adjusting vertical air flow
Vent Control
For maximumcoolingefficiency,CLOSEthevent.Thiswill allowinternalaircirculation.
OPENtheventto dischargestaleair.
i ..,.,.......
CLOSE,-L VENT.-t OPEN
Owner's Manual 19

OperatingInstructions
Drain Pipe
In humid weather, excess water may
cause the Base Pan to overflow.To
drain the water, remove the Drain Cap
and secure the Drain Pipe to the rear
hole of the Base Pan.
Press the drain pipe into the hole by
pushing down and away from the fins
to avoid injury.
This air conditioner is equipped with a
slinger fan. (See drawing, below.)
The fan has an outer ring that runs in
the water that collects in the base pan
if it gets deep. That condensate is then
picked up by the fan and expelled
through the condenser, making the air
conditioner more efficient.
(_ Push
Drain Pipe_ Drain Cap
g
_AUTION: Be careful when inserting the drain pipe. Push away from
the sharp fin area to avoid slipping injuring yourself.
Removal From Window
Turn the air conditioner off, disconnect the power cord, remove the L bracket, the
screws and Support Bracket installed through the top and bottom of the guide
panels, and save for reinstallation later. Close the guide panels. Keeping a firm grip
on the air conditioner, raise the sash, and carefully tilt the air conditioner backward,
draining any condensate. Lift the air conditioner from the window and remove the
sash seal from between the windows.
Be sure to drain ALL condensate from the air conditioner. If you don't, it could run
out while you carry the unit, making a mess and creating a slipping hazard. This
simple step will save you much cleaning and make a safer work environment.
20 Room Air Conditioner