LG Tone Free HBS-FN7 User manual
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
135246
7 8 9 1110 12 13
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient
sound. So, you can use the function to listen to the music or watch a
video without interference.
When the Fast Pair connection pop-up
appears on the top area of the mobile
phone screen, tap it to connect.
• It only supports Android™ 6.0 or higher,
and requires conguring Bluetooth and
location information settings of the
mobile device.
If the pop-up does not appear, select
[LG HBS-FN7] from the Bluetooth
menu on the mobile phone and connect
it (for users of iOS or Android 5.0 or
lower versions).
!
CAUTION: In the list of Bluetooth
connected devices, LG HBS-FN7_LE
is not the correct model name for
connection. Check the model name in
use and connect with the model name without “LE”.
• NOTE: To connect with another device, perform the above procedure again.
-(
-(
-()#4'/
-(
-(
-()#4'/
#MVFUPPUI
Rev 2.0 PH
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved
USER MANUAL
Bluetooth®LG Stereo Headset
HBS-FN7
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void
the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
The complete manual is available for download from the
LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
NOTE: Actual product design may differ from images
shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
*The appearance and specications of the actual product
may differ depending on the model.
[Charging Case]
[Wired Charging]
When the charging cable is connected, the charging status is displayed
in the charging case.
• NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power to
mobile phones, etc.
[Earbuds]
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
• NOTE: The wireless charger is not provided. The wireless charging function
may not work in some wireless chargers. Wireless charging feature
charges at a slower rate due to less power being transmitted to the
charging case.
Charging terminals Charging terminals
Microphone
Microphone
TouchpadTouchpad
Speaker mesh Speaker mesh
2. How to pair
5. Placing a Call4. Playing Music 6. Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)
1. Overview
8. Charging
Charging
terminals
Battery Status
Indicator
Charging port
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Pairing /
Battery check button
Turn on the Bluetooth function on the mobile phone or the device to
be connected.
Open the cover of the charging case with the earbuds mounted on
the case. Press the pairing button for 3 to 5 seconds until the blue
battery status lamp blinks.
-(
-(
#MVFUPPUI 0/
~39 inch, ~1 m
Separate the earbuds from the charging case and adjust them so
that they t comfortably in your ears.
• NOTE: You can easily separate the earbuds from the charging case by
turning the part with dotted line in the image below to left or right and
lifting the earbuds.
When you wear the earbuds, you will
hear a wearing detection alarm.
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the
Volume
: Touch the left(Decrease volume)
or right(Increase volume) earbud
twice.
Play Next : Touch the left or right earbud three
times.
• NOTE:
You can change the operation method of the function in the touchpad
settings of the LG TONE Free app.
Function Description
Answering Calls : Touch the left or right earbud
once.
Ending Calls : Touch the left or right earbud
twice.
Rejecting Calls : Touch and hold the left or right
earbud.
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to
the ambient sound so that you can recognize the surrounding situation
and any potential risks.
Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.
• NOTE: ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
UVnano Indicator
UVnano LED
UVnano LED
7. UVnano
3. Wearing Earbuds
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired
after mounting them on the
charging case and closing the
cover, the UVnano LED operates
for 10 minutes.
*UVnano is a compound word derived from the words UV and its unit,
nanometer.
• NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano LED in the charging case eliminates up to 99.9% of
Staphylococcus aureus and Escherichia coli inside the earbud hole.
In the case of a white product, discoloring may occur in the contact area of
the UVnano LED, but it does not affect the product function.
The UVnano LED does not turn on while charging wirelessly.
!
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
NOTE: For the best performance and to
prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Google Play App Store
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
-When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
-When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
-If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
-This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
-This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
-THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
-When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
-When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
-If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
-This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
-This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
-THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
-When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
-The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
- This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
-When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
-The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
- This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
-When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
-The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
- This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
-When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
-The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
- This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
-When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
-The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
- This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
15 17 1916 18 20
21
14
22 23 2524 26 27
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
-When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
-When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive
atmosphere. Although this is uncommon, your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in bodily
injury or even death. Areas with a potentially explosive atmosphere are often
but not always clearly marked.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud
Battery, Voice Alert, Change Equalizer Mode, Check Last Connected
Location Information, and Find My Earbuds functions. Check out the
app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the
Google Play Store or App Store or scan the QR code below.
It supports Android 5.0 or higher and iOS 11 or higher.
Google Play App Store
Safety Precautions
The following safety precautions are provided to prevent any
unexpected accident or damage. Please familiarize yourself with the
safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in
minor injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with
the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a
small component of the product.
Make sure that foreign objects do not enter the charger’s
connectors (charging port and power plug). Failure to do so may
result in re or electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be
removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly,
it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause
damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of ammable liquid or gas.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Troubleshooting
If you see any of the following symptoms while using the product,
make sure to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does
not turn on Check the battery level and charge it.
If unable to
make a call with
earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable
to register
earbuds to
mobile phone
Check whether earbuds are turned on.
Check if the charging case of earbuds are in
search mode.
- Press the pairing button on the charging case
to switch to search mode.
If you replaced
the earbuds
or there is a
problem with
the operation
Put the earbuds in the charging case and, with
the case open, press the pairing button for
10 seconds or more.
- The factory reset proceeds while the battery
status indicator on the charging case ashes red.
Please reconnect the device after factory reset.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
iis in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/declaration
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFHBSFN7
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset
operate using radio signals and mobile and landline networks as well as user-
programmed functions, which cannot guarantee connection under all
conditions. Therefore, you should never rely solely upon any electronic
device for essential communications (e.g., medical emergencies). Remember,
in order to make or receive calls, the headset and the electronic device
connected to the headset must be switched on and in a service area with
adequate mobile signal strength. Emergency calls may not be possible on
all mobile phone networks or when certain network services and/or phone
features are in use. Check with your local service provider.
5. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the rst few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C
(+122°F) or below -10°C (+14°F). For maximum battery capacity, use the
battery at room temperature. If the battery is used in low temperatures,
the battery capacity will be reduced. The battery can only be charged in
temperatures between 0°C (+32°F) and +45°C (+113°F).
6. Recycling the battery in your
Bluetooth
headset
The battery in your Bluetooth headset must be disposed of properly and
should never be placed in municipal waste. The LG Electronics service partner
that removes the battery will dispose of it according to local regulations.
7. Conditions
- The warranty is valid only if the original receipt issued to the original purchaser
by the dealer, specifying the date of purchase and serial number, is presented
with the product to be repaired or replaced. LG Electronics reserves the right
to refuse warranty service if this information has been removed or changed
after the original purchase of the product from the dealer.
-If LG Electronics repairs or replaces the product, the repaired or replaced
product shall be warranted for the remaining time of the original warranty
period or for ninety (90) days from the date of repair, whichever is longer.
Repair or replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will become the
property of LG Electronics.
-This warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover any
failure of the product due to accident, modication or adjustment, acts of
God, or damage resulting from liquid.
-This warranty does not cover product failures due to improper repair
installations, modications, or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
-THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
-Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied
warranties, so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory rights
under applicable national legislation in force, nor the consumer’s rights
against the dealer arising from their sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it
to the dealer from whom it was purchased or contact your local
LG Electronics contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high
volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not recommended
and is illegal in some areas. Be careful and attentive while driving. Stop using this
device if you nd it disruptive or distracting while operating any type of vehicle
or performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : WHEN OPENING THE CHARGING CASE OR WIRELESS
CHARGING, THE UV FUNCTION DOES NOT WORK.
Specications and Features
Item Comments
Bluetooth Specications
V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds
& With Charging case
(ANC ON)
Up to 7 & Up to 21 hours
(Up to 5 / Up to 15 hours)*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime
※When charging wired at room temperature
Rated Input Voltage Earbud : DC 5 V, 110 mA
Charging case : DC 5 V, 500 mA
Operating Temperature
0 °C (+32 °F) ~ +40 °C (+104 °F)
Dimensions (mm) /
Weight (g)
Earbud : 16.2 mm (W) X 32.7 mm (L) X
26.8 mm (H) / 5.6 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X
27.6 mm (H) /
39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm
*Duration of use may vary depending on the connected mobile device, features
being used, settings, signal strength, operating temperature, frequency band, and
other methods of use. Fast charging feature does not apply when charging case
is placed on wireless charging device such as a pad. Wireless charging feature
charges at a slower rate due to less power being transmitted to the charging case.
If earbuds are mounted in the charging case, the earbuds’ battery
status is displayed.
Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for ten minutes.
Once this process is complete, the charging case’s battery status will
be displayed.
9. Checking the Battery Status
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
• NOTE: When the charging case lid is closed, charging case battery status
is displayed. If the charging case has no remaining charge, there will be
no display and it cannot function. We recommend you keep the charging
case charged at all times as the earbuds are not able to be turned on and
turned off independently.
Other manuals for Tone Free HBS-FN7
3
Table of contents
Other LG Headset manuals
LG
LG TONE FREE User manual
LG
LG HBS-XL7 User manual
LG
LG TONE-FP9E.AUSACLK User manual
LG
LG FORCE HBS-S80 User manual
LG
LG Tone Infinim HBS900 User manual
LG
LG Tone Platinum HBS-1010 User manual
LG
LG ToneFree User manual
LG
LG TONE PLATINUM HBS-1100 User manual
LG
LG HBM-905 User manual
LG
LG Tone Free TONE-T60Q.AUSACBK User manual
