LG STB-3000 User manual

Please read this manual carefully before operating your
set and retain it for future reference.
SET-TOP BOX
OWNER’S MANUAL
www.lg.com
STB-3000

ENG
ENGLISH
2TABLE OF CONTENTS
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE INFORMATION
4 SAFETY INSTRUCTIONS
10 ASSEMBLING AND PREPARING
10 Unpacking
11 Separate purchase
12 Parts and Components
12 - Front Panel
12 - Rear Panel
13 How to Use Dual Lock™ (optional)
14 MAKING CONNECTIONS
14 Antenna Connection
15 Satellite Dish Connection
15 Adapter Connection
16 Other Connections
18 MAINTENANCE
18 Cleaning your Set-Top Box
18 TROUBLESHOOTING
19 SPECIFICATIONS
WARNING
yIf you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yIf you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
yThe note helps you understand and use
the product safely. Please read the note
carefully before using the product.

ENGENGLISH
3
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, and DTS 2.0+Digital Out is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping, and handling) upon email request to
[email protected]. This offer is valid for three (3) years from the date on which you purchased the
product.

ENG
ENGLISH
4SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
yPlease read these safety precautions carefully before using the product.
yIn this manual, the illustration may be somewhat different from your product because it is just
example to help the instruction.
yManufacturer and installer cannot provide service related to human safety as the applicable
wireless device has possibility of electric wave interference.
WARNING
Desiccant
yKeep away from heat sources like electrical heaters.
-
- Electrical shock, fire, malfunction or deformation may occur.
Desiccant
yKeep the packing anti-moisture material or vinyl packing out of the reach of
children.
-
- Anti-moisture material is harmful if swallowed. If swallowed by mistake,
force the patient to vomit and visit the nearest hospital. Additionally, vinyl
packing can cause suffocation. Keep it out of the reach of children.
Desiccant
yDo not use the product in damp place such as a bathroom or any place
where it is likely to get wet.
-
- This may cause a fire or could give an electric shock.
Desiccant
yDo not place the product where it might be exposed to dust.
-
- This may cause a fire hazard.
Desiccant
yDo not leave the power or signal cable unattended on the pathway.
-
- The passerby can falter, which can cause electrical shock, fire, product
breakdown or injury.
yTV and Set-Top Box shall be installed and used on distance greater than 20cm from human
body.
Desiccant
yInstall the product in a neat and dry place.
-
- Dust or moisture can cause electrical shock, fire or product damage.
Desiccant
yIf you can smell smoke or other odors or hear a strange sound unplug the
power cord and contact the service center.
-
- If you continue to use without taking proper measures, electrical shock or
fire can occur.
Desiccant
yDo not put heavy objects on the product or sit upon it.
-
- If the product collapses or is dropped, you may be injured. Children must
pay particular attention.

ENGENGLISH
5
SAFETY INSTRUCTIONS
Desiccant
yIf you dropped the product or the case is broken, turn off the product and
unplug the power cord.
-
- If you continue to use without taking proper measures, electrical shock or
fire can occur. Contact the service center.
Desiccant
yDo not drop metallic objects such as coins, hair pins, chopsticks or wire into
the product, or inflammable objects such as paper and matches. Children
must pay particular attention.
-
- Electrical shock, fire or injury can occur. If a foreign object is dropped into
the product, unplug the power cord and contact the service centre.
Desiccant
yInstall the product where no radio wave occurs.

yMake sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on earth.)
Otherwise possibility you may be electrocuted or injured.

yInsert power cable plug completely into wall socket otherwise if not secured
completely into socket, fire ignition may break out.

yDo not touch the power plug with wet hands. Additionally, if the cord pin is
wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
yIf you don’t intend to use the product for a long time, unplug the power
cable from the product.
-
- Covering dust can cause a fire, or insulation deterioration can cause
electric leakage, electric shock or fire.
yNever touch this product or antenna during a thunder or lighting storm.
-
- You may be electrocuted.
yDo not insert any metal objects/conductors (like a metal chopstick / cutlery
/ screwdriver) between power cable plug and input Wall Socket while it is
connected to the input terminal on the wall. Additionally, do not touch the
power cable right after plugging into the wall input terminal. You may be
electrocuted.
yDISCONNECTING DEVICE FROM MAINS
-
- Mains plug is the disconnecting device. The plug must remain readily operable.
yMake sure to turn off the product. Make sure to remove all cables before
moving the product.
-
- You may be electrocuted or the product can be damaged.

ENG
ENGLISH
6SAFETY INSTRUCTIONS
yDo not disassemble, repair or modify the product at your own discretion.
-
- Fire or electric shock accident can occur.
-
- Contact the service centre for check, calibration or repair.
yDo not spray water on the product or scrub with an inflammable substance
(thinner or benzene). Fire or electric shock accident can occur.
yTo reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture. Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
yDo not put heavy objects or many objects on the product.
-
- It may disable normal wireless connection with the TV or cause problem to the product.
yDo not allow any impact, shock or any objects to fall into the unit, and do
not drop anything onto the screen.
-
- You may be injured or the product can be damaged.
yIn the event that an image does not appear on the screen please switch it
off and unplug it from the mains supply and contact your service centre.
-
- This may cause a fire or electric shock hazard.
yNever touch the wall outlet when there is leakage of gas, open the windows
and ventilate.
-
- It may cause a fire or a burn by a spark.
yDo not place anything containing liquid on top of the product such as
flowerpot, cup, cosmetics or candle.
-
- This may cause a fire hazard.
yIf water is split into the product, unplug it from the mains supply outlet
immediately and consult your service centre.
-
- This may cause an electric shock hazard.
yDo not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.

ENGENGLISH
7
SAFETY INSTRUCTIONS
CAUTION

yMake sure the product ventilation hole is not blocked. Install the product in
a suitably wide place (more than 10cm from the wall)
-
- If you install the product too close to the wall, it may be deformed or fire
can break out due to internal heat.

yDo not block any of the ventilation openings. Install in accordance with the
manufacturer’s instructions.
-
- The product can be deformed or fire can break out due to overheating
inside the product.

yInstall the product on a flat and stable place that has no risk of dropping
the product.
-
- If the product is dropped, you may be injured or the product may be
broken.

yWhen installing the product on a table, be careful not to place it near the
edge.
-
- This may cause the product to fall causing serious injury to a child or
adult and serious damage to the product. Only use a suitable stand.

yDo not place the product close to source of steam or oil such as a
humidifier.
-
- This may create a fire hazard or an electric shock hazard.

yKeep the product away from direct sunlight.
-
- The product can be damaged.

yDo not place the product in a built-in installation such as bookcase or rack.
-
- Ventilation required.
yDo not unplug the power cord while the product is in use.
-
- Electrical shock can damage the product.
yEnsure the power cord does not come into contact with hot objects such as
a heater.
-
- This may cause a fire or an electric shock hazard.
yMost appliances recommend they be placed upon a dedicated circuit;
that is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits.
yDo not overload wall outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these conditions could result in
electric shock or fire.

ENG
ENGLISH
8SAFETY INSTRUCTIONS
yAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
yDo not turn the product On/Off by plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power plug for switch.)
-
- It may cause mechanical failure or could give an electric shock.
yProtect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the
appliance.
yPrevent dust collecting on the power plug pins or outlet.
-
- This may cause a fire hazard.
yPeriodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
yDo not shock the product when moving it.
-
- You may be electrocuted or the product can be damaged.
yMake the panel face forward and hold it with both hands to move.
-
- If you drop the product, the damaged product can cause electric shock or
fire. Contact with the service centre for repair.
yDo not dispose the product-packing box. Use it when you move.
Owner's Manual
yRead these instructions.
yKeep these instructions.
yHeed all warnings.
yFollow all instructions.
Owner's Manual
yDo not put or store inflammable substances near the product.
-
- There is a danger of explosion or fire due careless handling of the
inflammable substances.
Owner's Manual
yUse authorized detergent only when cleaning the product. (Do not use
benzene, thinner or alcohol.)
-
- Product can be deformed.
Owner's Manual
yTake a rest from time to time to protect your vision.
yTake a regular break when using with a product for a long time.
Owner's Manual
yKeep the product clean at all times.
Owner's Manual
yDo not press strongly upon the panel with a hand or sharp object such as
nail, pencil or pen, or make a scratch on it.

ENGENGLISH
9
SAFETY INSTRUCTIONS
yOnly use the attachments / accessories specified by the manufacturer.
Owner's Manual
yWhen cleaning the product surface, unplug the power cord and scrub with
soft cloth to prevent scratching. Do not clean with a wet cloth.
-
- The water can sink into the product, which can cause electric shock or
serious malfunction.
Owner's Manual
yContact the service centre once a year to clean the internal parts of the
product.
-
- Accumulated dust can cause mechanical failure.
Owner's Manual
yRefer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
yOnly use the specified type of battery.
This could cause damage to the remote control.
yDo not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yBatteries should not be exposed to excessive heat. For example, keep away from direct Sunlight,
open fireplace and electric heaters.
yDo not place non-rechargeable batteries in charging device.
yDo not use high voltage electrical goods near the product(e.g. electric mosquito-swatter). This
may result in product malfunction.
yIf water or another substance enters the product (like a AC adapter, power
cord, TV), disconnect the power cord and contact the service centre
immediately.
Otherwise, this may result in fire or electric shock.
yOnly use an authorized AC adapter and power cord approved by LG
Electronics. Otherwise, this may result in fire, electric shock, malfunction or
product deformation.
yNever Disassemble the AC adapter or power cord.
This may result in fire or electric shock.
yBe careful in handling the adapter to prevent any external shocks to it. An
external shock may cause damage to the adapter.

ENG
ENGLISH
10 ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damage or injuries caused by using unapproved items are not covered by the warranty.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your Set-Top Box’s USB port.
yWhen connecting two USB devices at the same time, each one should have bezels less than 8.5
mm thick.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
yUse a certified cable with the HDMI logo attached.
yIf you do not use a certified HDMI cable, the screen may not display or a connection error may
occur. (Recommended HDMI Cable Types)
- High-Speed HDMI®/™ Cable (3 m or less)
- High-Speed HDMI®/™ Cable with Ethernet (3 m or less)

ENGENGLISH
11
ASSEMBLING AND PREPARING
Set-Top Box Owner’s manual Power Cord /
AC-DC Adapter
(Depending on model)
(See p. 15)
HDMI Cable
(See p. 16, 17)
TLM Cable
(See p. 17)
A/V Adapter Cable
(See p. 17)
Dual Lock™
(See p. 13)
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
AN-MR500
Magic Remote

ENG
ENGLISH
12 ASSEMBLING AND PREPARING
Parts and Components
Front Panel
USB IN 2
USB IN 1
IN 2
OPTICAL
AUDIO OUT
AV IN SERVICEIR IN
LAN DISPLAY
CONTROL ANTENNA/
CABLE IN
LNB
Satellite IN
OUT
POWER
IN 1
13/18V
700mA Max
Power Indicator
Rear Panel
USB IN 2
USB IN 1
IN 2
OPTICAL
AUDIO OUT
AV IN SERVICEIR IN
LAN DISPLAY
CONTROL ANTENNA/
CABLE IN
LNB
Satellite IN
OUT
POWER
IN 1
13/18V
700mA Max

ENGENGLISH
13
ASSEMBLING AND PREPARING
How to Use Dual Lock™ (optional)
(Image shown may differ from your product.)
Fix the Set-Top Box to the TV and use it when you want to.
1 After removing the protection paper from the Dual Lock™, stick it to the TV and the Set-Top Box as
shown.
Dual Lock™
2 Attach the Set-Top Box to the TV by pressing the Velcro strips together.
NOTE
yPlease make sure no foreign substances exist on the surface of the product, and then firmly attach
the Dual Lock™.
yBefore attaching the Set-Top Box to the TV set, let the attached Dual Lock™ dry for at least three
days.

ENG
ENGLISH
14 MAKING CONNECTIONS
MAKING CONNECTIONS
You can connect various external devices to
the product. For more information on external
device’s connection, refer to the manual provided
with each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
yThe external device connections shown
may differ slightly from illustrations in this
manual.
yConnect external devices to the Set-Top
Box regardless about the order of the
Set-Top Box port.
yIf you record a TV program on a DVD
recorder or VCR, make sure to connect
the TV signal input cable to the Set-Top
Box through a DVD recorder or VCR. For
more information about recording, refer to
the manual provided with the connected
device.
yRefer to the external equipment’s manual
for operating instructions.
yIf you connect a gaming device to the
Set-Top Box, use the cable supplied with
the gaming device.
yUsing a DVI to HDMI cable may cause
compatibility issues.
Antenna Connection
Connect the Set-Top Box to a wall antenna socket
with an RF cable (75 Ω).
ANTENNA/
CABLE IN
Wall Antenna
Socket
(*Not Provided)
NOTE
yUse a signal splitter to use more than 2
TVs.
yIf the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yIf the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yAn antenna cable and converter are not
supplied.
ySupported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC

ENGENGLISH
15
MAKING CONNECTIONS
Satellite Dish Connection
Connect the Set-Top Box to a satellite dish to a
satellite socket with a satellite RF cable (75 Ω).
LNB
Satellite IN
13/18V
700mA Max
Satellite
Dish
(*Not Provided)
Adapter Connection
POWER
AC-DC Adapter
Power Cord
CAUTION
yPlease be sure to connect the Set-Top
Box to the AC-DC power adapter before
connecting the Set-Top Box’s power plug
to a wall power outlet.

ENG
ENGLISH
16 MAKING CONNECTIONS
Other Connections
Connect your Set-Top Box to external devices. For the best picture and audio quality, Connect the external
device using an HDMI cable as shown. Some separate cable is not provided.
Front
USB
Blu-Ray / HD Cable Box / HD STB / DVD / PC
HUB
USB IN 2
USB IN 1
IN 2
HDMI OUT
DVI OUT
IN 1

ENGENGLISH
17
MAKING CONNECTIONS
OPTICAL
AUDIO OUT
AV IN SERVICEIR IN
LAN DISPLAY
CONTROL ANTENNA/
CABLE IN
DIGITAL
AUDIO IN
RS-232C IN
VIDEORAUDIOL/MONO
OUT
POWER
HDMI IN
DVI IN
LNB
Satellite IN
13/18V
700mA Max
Rear
TV / Monitor
Digital Audio System
TV
Blu-Ray / HD Cable Box / DVD / VCR
External IR
receiver
HDMI Cable TLM Cable
A/V Adapter
Cable
GND IR +3.5V
WHITE
YELLOW
RED
WHITE
YELLOW
RED
WHITE
YELLOW
RED

ENG
ENGLISH
18 MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning your Set-Top Box
Clean your Set-Top Box regularly to keep the best performance and to extend the product lifespan.
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
Remove the accumulated dust or dirt on the AC-DC adapter regularly.
CAUTION
yMake sure to turn the power off and disconnect the power cord and all other cables first.
yWhen the Set-Top Box is left unattended and unused for a long time, disconnect the power cord
from the wall outlet to prevent possible damage from lightning or power surges.
yDo not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result
in scratches and image distortions.
yDo not use any chemicals as this may damage the product.
yDo not spray liquid onto the surface. If water enters the Set-Top Box, it may result in fire, electric
shock, or malfunction.
TROUBLESHOOTING
The software version can be updated for improvement in performance. Customer needs to ensure the
compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload
revised software version according to the guidance provided by LGE.
Problem Solution
Cannot control the
Set-Top Box with
the remote control.
yCheck the remote control sensor on the product and try again.
yCheck if there is any obstacle between the product and the remote control.
yCheck if the batteries are still working and properly installed ( to , to ).
Set-Top Box does
not output any video
or audio.
yCheck if the product is turned on.
yCheck if the power cord is connected to a wall outlet.
yCheck if there is a problem in the wall outlet by connecting other products.
The Set-Top Box
turns off suddenly.
yCheck the power control settings. The power supply may be interrupted.
When connecting
to the PC (HDMI/
DVI), ‘No signal’ or
‘Invalid Format’ is
displayed.
yTurn the Set-Top Box off/on using the remote control.
yReconnect the HDMI cable.
yRestart the PC with the Set-Top Box on.

ENGENGLISH
19
SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
MODEL STB-3000
Dimensions (W x H x D) (mm) 221 x 28.5 x 175.2
Weight (kg) 0.54
Power requirement 19 V 2.1 A
AC-DC Adapter
Manufacturer: APD
Model: DA-48F19
Manufacturer: Lien Chang
Model: LCAP35
Wireless module(LGSBW41) Specifications
Wireless LAN module
Bluetooth module
Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.0
Frequency
range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
Frequency
range 2400 to 2483.5 MHz
Output
power (Max.)
802.11a: 13 dBm
802.11b: 15 dBm
802.11g: 14 dBm
802.11n - 2.4 GHz: 16 dBm
802.11n - 5 GHz: 16 dBm
Output
power (Max.) 10 dBm
yBecause band channel used by the country could be different, the user can not change or adjust
the operating frequency and this product is set for the regional frequency table.
yThis device should be installed and operated with minimum distance 20 cm between the device and
your body. And this phrase is for the general statement for consideration of user environment.
0197
0197

ENG
ENGLISH
20 SPECIFICATIONS
HDMI-DTV Supported Mode
(Only HDMI IN 1 and HDMI IN 2)
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480 31.469
31.5
59.94
60
720 x 576 31.25
15.625
50
50
1280 x 720
37.500
44.96
45
50
59.94
60
1920 x 1080
33.72
33.75
28.125
26.97
27
28.125
33.716
33.75
56.250
67.43
67.5
59.94
60
50.00
23.97
24
25
29.976
30.00
50
59.94
60
HDMI-PC Supported Mode
(Only HDMI IN 1 and HDMI IN 2)
yPC audio not supported.
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350 31.468 70.09
720 x 400 31.469 70.08
640 x 480 31.469 59.94
800 x 600 37.879 60.31
1024 x 768 48.363 60.00
1152 x 864 54.348 60.053
1280 x 1024 63.981 60.020
1360 x 768 47.712 60.015
1920 x 1080 67.5 60.00
Environment condition
Operating Temperature 0 °C to 40 °C
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity Less than 85 %
Satellite Digital TV1Digital TV Analogue TV
Television system
DVB-T/T2
DVB-C
DVB-S/S2
DVB-T
DVB-C
PAL/SECAM B/G/D/K,
PAL I/I’,
SECAM L/L’
Programme coverage VHF, UHF
C-Band, Ku-Band VHF, UHF
VHF : E2 to E12,
UHF : E21 to E69,
CATV: S1 to S20,
HYPER: S21 to S47
Maximum number of
storable programmes
DVB-S/S2 : 6,000
DVB-T/T2/C & Analogue TV : 1,500
External antenna impedance 75 Ω
1 Satellite and DVB-T2 support models.