LG SC9S Specification sheet

www.lg.com
Copyright © 2023 LG Electronics Inc. All Rights Reserved.
SC9S
SIMPLE MANUAL
Wi-Fi
SOUND BAR
2211_Rev01
MFL71970457
ENGLISH
Specification
Power consumption
yRefer to the main label.
AC adapter
yModel: MS-Z2610R230-065E0-P
yManufacturer: MOSO POWER SUPPLY TECHNOLOGY CO., LTD.
yInput: 100 - 240 V ~ 50/60 Hz Max. 1.6 A
yOutput: 23 V 02.61 A
Dimensions (W x H x D): Approx. 975.0 mm x 63.0 mm x 125.0
mm
Bus Power Supply (USB): 5 V 0500 mA
Amplifier (Total RMS Output power): 400 W RMS
Open Source Software Notice Information
To obtain the source code that is contained in this product, under
GPL, LGPL, MPL, and other open source licenses that have the
obligation to disclose source code, and to access all referred
license terms, copyright notices and other relevant documents,
please visit https://opensource.lge.com.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling)
upon email request to opensour[email protected].
This offer is valid to anyone in receipt of this information for a
period of three years after our last shipment of this product.
POWER: This unit operates on a mains supply of
100 - 240 V ~ 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug.
When replacing the fuse, always use a fuse of the same rating
and approved to BS 1362. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer. If the type of plug supplied is not suitable for the mains
sockets in your home, then the plug should be removed and a
suitable type fitted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit
must be destroyed. A mains plug with bared wires is hazardous
if inserted in a mains socket. Do not connect either wire to the
earth pin, marked with the letter E or with the earth symbol 6
or coloured green or green and yellow. If any other plug is fitted,
use same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the
wires in the mains lead of this unit may not correspond with the
coloured marking identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
SC9S.DSGPLLK_SIMPLE (Sheet)_MFL71970457.indd 1-3 2023-03-06   8:57:37

If you see a red LED on the wireless subwoofer or on the front of the wireless receiver, it means that the sound bar is not connected to
the speakers. If this is the case, connect them in the following order.
APress the Power button on the sound bar to turn it off.
BPress the Pairing (PAIRING) button on the back of the disconnected wireless subwoofer or wireless receiver. Check if each LED blinks green.
-If you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer again.
CPress the Power button on the sound bar to turn it on.
DWhen the connection is established, you will see a green LED light on the wireless subwoofer or on the front of the wireless receiver light up
green.
Keep the sound bar, the subwoofer and wireless receiver away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent
wireless interference.
ySome speakers may not make sound depend on the input source. Select BASS BLAST (BASS BLAST+) sound mode to listen through all
speakers.
yDesign and specifications are subject to change without notice.
yGoogle Play is a trademark of Google LLC.
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
ASound bar
BRemote Control Receiver
CStatus LED (
ABC )
DRear Speakers / Wireless Receiver (Sold separately, SPQ8-S)
EWireless Subwoofer - Install it close to the sound bar.
FExternal Device - (Blu-ray player, game console, etc.)
: On / : Off / : Blink
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
Red blinking White
blinking White Blue blinking Blue White White Purple
Power on
Power off Wi-Fi ready Wi-Fi Bluetooth ready Bluetooth OPTICAL /
HDMI ARC HDMI IN USB
aConnect the sound bar to your TV via an optical cable or an HDMI cable.
b If you are using an external device (ex. Set-top box, Blu-ray player, game console, etc.), connect it to the sound bar or to the TV via
an HDMI cable.
If necessary, purchase HDMI cables, an optical cable, or a USB extension cable to connect the sound bar.
cIf you purchased the rear speakers and wireless receiver separately, connect the rear speakers to the wireless receiver via a speaker
cable. When connecting the rear speakers to the wireless receiver, connect the black striped cable to the negative terminal of each
speaker and the remaining cable to the positive terminal of each speaker.
d Connect to power in the following order: wireless subwoofer [wireless receiver [sound bar. Then, turn on the sound bar. When
the connection is automatically established with the sound bar, the LEDs on the wireless subwoofer and the wireless receiver will
light up green.
eUsing the product with your TV
A Press the Function button repeatedly until LED1 and LED2 light up white. If you are using an external device that is
connected to HDMI™ IN on the sound bar, press the Function button repeatedly until LED1 and LED3 light up white.
BOn your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
You can enjoy the sound by connecting LG WOWCAST (Sold separately, WTP3) to the sound bar wirelessly.
fConnecting the product to your smartphone via Wi-Fi
AConnect your smartphone to Wi-Fi.
BInstall the LG Sound Bar app on Google Play or the App Store.
CRun the LG Sound Bar app and follow the instructions.
DThe product will connect to your smartphone and you can control the product with LG Sound Bar app.
gConnecting the product to your smartphone via Bluetooth
ATap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off >
On)
BPress the Bluetooth pair button. After a moment, LED2 blinks blue.
CFind and tap “LG_Speaker_SC9S_XXXX” or the name you registered on the Google Home app.
DWhen the product is connected to your smartphone via Bluetooth, all LEDs light up blue.
D
D
c
c
c
HDMI OUT
OPTICAL INHDMI™ ▶ TV
(eARC/ARC)
HDMI™ IN
HDMI IN
HDMI IN
(ARC) OPTICAL
OUT
a
b
b
EF
a
C
1
2
3
B
A
Replacement of Battery
SC9S.DSGPLLK_SIMPLE (Sheet)_MFL71970457.indd 4-6 2023-03-06   8:57:39