LG Qua tab PZ Service manual

MBM65756003(1.0)
All other company names and product names are registered trademarks or trademarks of
respective companies referred to in this manual.
The ® marks and TM marks may be omitted in this manual.
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: LG Electronics Japan, Inc.
Manufactured by: LG Electronics Inc.
October 2016, 1st Edition
Please read this manual rst
Setting Guide
Thank you for purchasing the "Qua tab PZ" (simply called the "product" from
here on).
This "Setting Guide" describes the basic operations and initial settings for
using the product.
For descriptions on various functions, refer to "Basic Manual" or "User Guide
取扱説明書 詳細版 (Full Instruction Manual)" (Japanese) on the au website.
Before using the product, be sure to read the "Notes on Usage" to ensure
correct and safe use.
■Basic operations to input characters
This product uses the software keyboard displayed at the bottom of the
screen to enter characters.
Tap the keys on the screen to enter characters.
a
b
c
d
i
《QWERTY》
Switchingthekeyboardtype
《10-key》
《50-key》
e f g h
a Inputs the characters of each key.
b Switches upper case/lower case
of entering character.
c Switches the Input Mode.
Touch and hold → tap [Keyboard
type] to switch to a 10-key
keyboard or 50-key keyboard.
d Enters pictograms/symbols/
emoticons.
e Switches to voice typing.
f Inputs a space and converts
characters in Hiragana-Kanji input
mode.
g Moves the cursor to the right/left
and changes the range of characters
when converting characters.
h Start a new line/conrm the
characters input.
i Deletes the character to the left
of the cursor.
Flick input
For the 10-key keyboard, you can ick
the key up, down, right, or left to enter
a character. Touch and hold the key
to display the candidates that can be
entered by icking (ick guide).
Flick guide
■Basic operations of the keys
Powerkey(side)
●Power ON
Press and hold the power key.
●Power OFF
Press and hold the power key → Select
[Power o󱐯] → [POWER OFF].
●Sleep mode
Press the power key in operation to
switch to sleep mode.
●Cancel sleep mode
Press the power key in sleep mode to
display the lock screen.
Display(Touchpanel)
Directly touch an item or button displayed on
the screen to operate.
Homebutton
Use it to display the Home screen.
Dualwindowbutton
Divides the screen and uses two
applications at one time.
Taskbutton
Check running applications.
Backbutton
Returns to the previous screen.
●Unlocking the screen
Swipe on the lock screen.
* The way to release the lock screen di󱐯ers depending on the screen lock being set.
●Learning the Basic Operations
Describes the names of parts
and operation.
●Initial Settings
Described in the steps for the
following:
・Language settings, Accessibility
・Wireless LAN (Wi-Fi®) settings
・Google account settings
・Other settings
●au Easy Setting
Sets au ID and services.
●E-mail Settings
Sets up to use e-mail (@ezweb.
ne.jp).
●"Basic Manual application"
Installs and starts up the Basic
Manual.
●Transferring Contacts
You can transfer your contacts
data from your previous au device.
●How to Transfer Data from
the au Settings Menu
You can restore/backup data
from your previous au device to
this product using a microSD
memory card or au servers.
●Reducing Battery Consumption
You can reduce the battery
consumption by setting up
Battery saver.
LearningtheBasicOperations
auEasySetting
■Setting au ID
You can setup convenient au functions and services.
This section describes how to set up an au ID on the initial settings screen that appears when you turn on the power for the rst time.
The settings can be changed with the "au ID Setting" application.
au ID* Register your au phone number or any other character string as an au ID.
au ID password Register password for using au ID.
* The same "au ID" as another user's cannot be registered.
● You can also setup au services on the Home screen by tapping [基本機能 (Basic functions)] → [Settings] → [au Settings Menu] → [au Easy Setting].
1 2 3 4 5 6
[Next] [Register "au ID"] → [Next] [au IDの設定・保存 (Set
and save au ID)]
Enter the security code
→ [OK]
Enter a security password
→ [設定 (Settings)]→ [終了
(End)]
[Update] → [Next]
7 8 9 10 11
Conrm the terms of use
→ [Agree] → [Next] →
[Agree]
* If you selected [Disagree],
the au Easy Setting
Completed screen will
appear.
To use Lookout for au,
[Activate] → [Next]
* If you do not use it, tap
[Skip activation] → [Next].
* Allowing each authority of
Lookout for au completes
the pre-conguration.
Place checkmarks on the
data you want to restore
→ [次へ (Next)]
* If there is no data to be
restored, this screen will
not be displayed.
Place checkmarks on
the application to be
installed → [次へ (Next)]
[Finish]
* When a di󱐯erent screen
from the above appears,
follow the displayed
screen.
InitialSettings:STEP1
■Setting the language, accessibility
This section describes the initial settings screen that appears when you
turn on the power for the rst time.
●Changing the language ●Setting up accessibility
[日本語（日本）] → select language
→ [ ]
* Once you select your desired
language, the language for the
initial settings screen also changes.
From here on, follow the onscreen
instructions.
After switching to the English
display, [Accessibility] → review
the precautions, [YES] → set
Accessibility → [ ] → [ ]
* The operations herein di󱐯er depending
on the congured Accessibility
settings.
* If the language was not switched via the initial settings, switch the
language via the following procedures.
On the Home screen, [基本機能 (Basic functions)] → [設定 (Settings)] →
[言語と入力 (Language & keybord)] →[言語 (Language)] → [English].
The folder names will not be changed from the language of the initial
settings. Convert the folder names contained in "Setting Guide" (this
manual), "Basic Manual", "Notes on Usage" into Japanese as per the
following and operate.
English Japanese
au Supports au サポート
Others Apps その他アプリ
InitialSettings:STEP4
■Other settings
1
Check legal documents
→ place check marks
on "I agree" and "I agree
(Optional)" → [DONE]
InitialSettings:STEP3
■Setting up Google account
You can use online services provided by Google, such as Gmail and Google Play, by setting up a Google account.
This section describes how to set up an account on the initial settings screen that appears when you turn on the power for the rst time.
User name Register your Google account (user ID) and the characters that you want to use as your mail address.
You can register a desired name, but a name already registered by another user cannot be set.
Password Register password for the Google account.
1 2 3 4 5
[No thanks] → [NEXT]
* To copy the settings of
an Android device to the
product, tap [Copy your
Google Accounts, apps,
and data from your other
device].
[Or create a new account]
* If you have a Google
account, enter the mail
address.
Enter your rst and last
names → [NEXT] → enter
your birthday and gender →
[NEXT] → enter your user
name → [NEXT] → enter
your password → [NEXT]
* User names already being
used by another user
cannot be used.
Conrm your phone number
→ [NEXT] → [VERIFY]
* When a code input screen
appears, follow the
onscreen instructions.
Conrm the contents →
[I AGREE]
6 7 8 9
[NEXT] Check the details of
Google services → [NEXT]
[No thanks] → [CONTINUE]
* If you are purchasing
applications from Google
Play, enter payment
information.
Set whether to protect the tablet
* To set the screen lock, place a check mark on "Protect this
device and require a PIN, pattern, or password to unlock the
screen" → [NEXT] → set the unlock method of the lock screen,
etc. → tap [OK].
* If you do not set up, clear the check mark on "Protect this device
and require a PIN, pattern, or password to unlock the screen" →
tap [SKIP] → [SKIP ANYWAY].
InitialSettings:STEP2
■Setting wireless LAN (Wi-Fi®)
By using the wireless LAN (Wi-Fi®) function, you can access to the
Internet using a wireless LAN environment built in your home or a public
wireless LAN environment away from home.
When setting the wireless LAN (Wi-Fi®) as described in this guide, you need
to be in an environment where the radio waves can be received from the
wireless LAN device or public wireless LAN that you want to access to.
Check the following information before setting the wireless LAN (Wi-Fi®)
function.
SSID The name set for the wireless LAN device or public
wireless LAN service that you are connecting to
Password The password for connecting to the wireless LAN
device or public wireless LAN service
* Connection to all public wireless LAN services is not guaranteed.
* You may need a separate contract with a service provider to use some
public wireless LAN services.
* Enabling the wireless LAN (Wi-Fi®) function uses a lot of battery power.
We recommend turning o󱐯 the wireless LAN (Wi-Fi®) function when not
using it.
1 2
[ ] of "Wi-Fi" → tap
the network that you are
connecting to
* If you do not set up, tap
[NEXT].
Enter Password →
[CONNECT] → conrm
the connection → [NEXT]
* This step is not required if
you select a wireless LAN
(Wi-Fi
®
) network without
security settings.
■How to read the notication panel
When a notication icon appears on the left side of the status bar, slide the
status bar down to open the notication panel to check the notication or
launch the application.
1 2
Slide down the status bar The notication panel appears.
■Setting Application Authority
When activating the applications/functions to access the functions or
information of the product for the rst time, the conrmation screen appears
to request the permission for the access authority.
When the conrmation screen appears, conrm the content and tap "DENY"
or "ALLOW".
• The explanation screen may be displayed depending on the application/
function. Also, the conrmation screen may be displayed several times or
the display may be di󱐯erent. Carefully check the displayed content, follow
the onscreen instructions.
• If the application authority is not allowed, applications/functions may not
be activated or using functions may be restricted.
• In this manual, description of the conrmation screens may be omitted.
■Basic operations of the touch panel
The display of the product is a touch panel and you can touch directly with
your nger to operate.
Tap/Double Tap
Lightly touch the
display and then
immediately release
your nger. Tapping
the same place twice
is called a double tap.
Touch and hold
Keep touching the
screen.
Slide
While your nger is
lightly touching the
screen, move it in the
desired direction.
Flick (Swipe)
Quickly move
(icking) your nger
up, down, right, or left.
Pinch
Touch the screen
with two ngers and
widen (pinch-out) or
narrow (pinch-in) the
ngers' distance.
Drag
Keep touching items
or icons and trace to
the desired position.

ReducingBatteryConsumption
■Using Battery Saver
Set up to switch to Battery Saver Mode automatically when the battery is running low.
1 2 3
On the Home screen, [基
本機能 (Basic functions)]
→ [Settings]
[Battery & power
saving]
[ ] on "Battery saver"
* Conrm the status such
battery etc. on "BATTERY
INFORMATION".
■Setting Battery saver on timing
1 2 3 4 5
On the Home screen, [基
本機能 (Basic functions)]
→ [Settings]
[Battery & power
saving]
[Battery saver] [Turn Battery saver on] Tap timing
E-mail (@ezweb.ne.jp) is a service that enables you to exchange e-mails with other cell phones, which support e-mail, and with PCs. Your
e-mail address is decided automatically after the initial settings.
The e-mail address in the initial settings can be changed.
Also, the setting to send/receive e-mails of au cell phones/smartphones by a tablet can be performed.
■Initial Settings
* If the conrmation screen for e-mail application appears, check the content and follow the onscreen instructions.
123
On the Home screen, [ ] Conrm e-mail address
→ [閉じる (Close)]
Conrm the contents →
[設定する (Set)]/[設定しない
(Not set)]
* Select [設定しない (Not set)] here
and nish the initial setting.
* When [設定する (Set)] is
selected, au ID log in screen
appears. Follow the onscreen
instructions, and the "When
select [設定する (Set)]" screen
appears.
* The operations herein di󱐯er
when [設定する (Set)] is
selected.
Conrm that it is the
desired mail address →
[完了 (Done)]
* If the mail address is not
the desired one, change it
from [変更 (Change)].
* For details of notes for
adding an account, refer to
au homepage.
■Conrming your e-mail address
1 2
On the E-mail screen,
[ ] →[E-mail information]
Your e-mail address appears in
the e-mail address eld.
* The initial setting of the e-mail cannot be performed via Wi-Fi
®
communications.
HowtoTransferDatafromtheauSettingsMenu
Return or store data from your previously used au device to this product using a microSD card or the au Smart Pass server.
• You need to setup an au ID to restore or save data using au Smart Pass servers.
• If you use a microSD memory card to restore data, save the data from your previous au device to a microSD memory card.
■How to restore data from the au Settings Menu
TransferringContacts
You can transfer data from your au device to the product using a microSD memory card.
1Save the contacts
(address book)
from your au device
to a microSD
memory card, and
insert the card into
the product
Refer to the instruction
manual of your au
device, etc. on how to
save the contacts.
2 3
On the Home screen [基本
機能 (Basic functions)] →
[Contacts]
[ ] → [Manage contacts]
→ [Import]
* When a contact is not
registered, tap [ ] →
[Import] → the import
source to proceed to step
5. If a saving location
screen appears, select the
desired account or location.
4 5 6
[SD card] → [NEXT]
* If a saving location screen
appears, select the desired
account or location.
Place checkmarks on the
item to be imported →
[IMPORT]
[IMPORT]
* When the import is complete,
"Contacts imported" appears.
123 4
On the Home screen, [基本
機能 (Basic functions)] →
[Settings]
[au Settings Menu]
[Data Transfer]
* If the terms of use appears,
check the content and follow
the onscreen instructions.
Select a method for
returning data
* You need to setup an au ID
to restore data using [au
スマートパスのサーバから戻
す (Restore data from au
Smart Pass server)] (data
backed up on au Smart
Pass servers).
566
If you selected [SDカード
から復元する (Restore data
from SD card)], select your
previous au device
* This screen is not displayed
if you selected [auスマートパ
スのサーバから戻す (Restore
data from au Smart Pass
server)] on the restore data
method screen.
Place checkmarks on the
data you want to restore
→ [戻す (Restore)] → [完了
(Done)]
* This screen is displayed if
you selected [スマートフォ
ンのデータを戻す (Restore
smartphone data)].
* When a conrmation
screen appears, follow the
onscreen instructions.
Place checkmarks on the
data you want to restore
→ [戻す (Restore)] → [完了
(Done)]
* When a conrmation
screen appears, follow the
onscreen instructions.
■Saving data from au Settings Menu
1 2 3
On the Home screen, [基本
機能 (Basic functions)] →
[Settings]
[au Settings Menu]
[Data Transfer]
* If the terms of use appears,
check the content and follow
the onscreen instructions.
4 5 5
Select a saving location
* You need to setup an au ID
to save data from [auスマー
トパスのサーバに預ける (Save
data to au Smart Pass
server)] (saving data to au
Smart Pass servers).
Place checkmarks on the
data to be saved, [保存する
(Save)] → [完了 (Done)]
Place checkmarks on
the data to be saved, [預
ける (Save)] → conrm
the details, follow the
instructions on the screen
→ [完了 (Done)]
* When a conrmation
screen appears, follow the
onscreen instructions.
When [SDカードから復元する (Restore
data from SD card)] is selected
When [SDカードに保存する (Saving
to SD card)] is selected
When [auスマートパスのサーバから
戻す (Restore data from au Smart
Pass server)] is selected
When [auスマートパスのサーバに
預ける (Save data to au Smart
Pass server)] is selected
If you want to use
the "Data Storage
App" application to
automatically save your
photos and contacts
to the au Smart Pass
server, you can set
it up by following the
procedure below.
On the Home screen
→ [基本機能 (Basic
functions)] → [Settings]
→ [au Settings Menu]
→ [Backup Setting] →
place checkmarks on the
data to be saved
E-mailSettings
■Changing your e-mail address
1 2 3 4
On the E-mail screen, [ ]
→ [Change Address/Setting
Filter]
[Eメールアドレスの変更へ (To
change e-mail address)]
Enter the security code →
[送信 (Send)]
Conrm the contents →
[承諾する (I accept)]
5 6 7
Enter e-mail address → [送信
(Send)]
[OK] [閉じる (Close)]
"BasicManualapplication"
■Downloading "Basic Manual application"
1 2
On the Home screen,
[au Supports] → [Basic
Manual]
[UPDATE] → [CONTINUE]
* If conrmation screens
are displayed, follow the
onscreen instructions to
operate.
■Using "Basic Manual application"
1 2
On the Home screen,
[au Supports] → [Basic
Manual]
Conrm contents
displayed → [ ]
3
The Basic Manual cover is
displayed.
* Packet communications fees are charged for downloading the "Basic Manual
application" (no charges for Wi-Fi
®
connections).
When select [設定する (Set)]