Life Span TR800-DT5 User manual

Treadmill Desk
Owner’s Manual for models:
TR800-DT5
TR1200-DT5
TR5000-DT5
1

Welcome to LifeSpan Workplace!
Congratulations on stepping into the growing movement of workplace activity.
You’re joining an enthusiastic community, one that’s dedicated to a gentle pace
towardsbetter living andmoreproductiveworkenvironments.
You’ve picked the right partner. LifeSpan is the originator of active workstations
and the global leader in safe and efficient workplace motion. We trust ourmission
will directly benefit your own, a task we don’t take sitting down. With our company-
wide dedication to quality and reliability, we’recertain you’ll be satisfied with your
newfound health.
Beforeyou assembleor operate your product, please read this manual thoroughly.
Important information regarding safety precautions, product maintenance,
assembly instructions, and proper operation are included.
We recommend you take a personal approach to adding movement to your day.
Begin slowly, gently increasing your activity in a way that is both comfortable and
enjoyable. We have a wealth ofhelpful information availableon our website, feel
free to use usasa resource as you utilize your new product. We’dlove to share our
strategiesandprovide you with proven methods for success.
Please thoroughly read this manual before you assemble or operate your treadmill.
Neither LifeSpan nor its representatives can accept responsibility for any damages or injury incurred as a
result ofinformation presented in this manual exceptunder the terms ofthe productwarranty.
3

Contents
Getting Started
Warranty 8
Registration
Safety First
Children & Pets
Safety Tips While in Use
Treadmill Base
About YourTreadmill Base 14
Specifications
Proper Grounding
Power Cord Options
Maintenance and Tips 16
Daily Cleaning
Monthly Cleaning
Safety andIntegrity
Belt Lubrication
BeltTensioning
Belt Alignment
Moving the Treadmill
4

Contents
DT5 Desk
Desk Assembly 22
Console Assembly 32
Final Connection 36
Treadmill to DT5 Desk Assembly
Leveling and Height Adjustment 37
Treadmill Desk Operations 39
Specifications
Setting the Clock
Starting the Treadmill Desk
Console Buttons
Preset Speed Button
Bluetooth Operation
Innovative Features
Troubleshooting
Personal Settings
Display Details
5

Getting Started
7

Getting Started
Warranty
Your LifeSpan treadmill desk comes with the following limited warranty valid in
North America.
Warranty Item
TR800-DT5
TR1200-DT5
TR5000-DT5
Frame
Lifetime
Lifetime
Lifetime
Motor
3 Years
3 Years
3 Years
Parts
1 Year
2 Years
2 Years
Labor
1 Year
1 Year
1 Year
LifeSpan warrants the equipment it manufactures is free from defects in
materials and workmanship under normal use and services. The periods above
are based on the date of purchase. During these periods, LifeSpan will repair
or replace any defective part. Free labor is included on all parts that are not
normally assembled or replaced by the customer within the labor period.
LifeSpan reserves the right to make changes and improvements to our products
without incurring any obligations tosimilarly alter any product purchased.
In order to insure our product warranty and to ensure the safe and efficient
operation of your LifeSpan product, only authorized parts can be used. The
warranty is void if any parts other than those provided by LifeSpan are used.
Exclusions and Limitations:
• This warranty does not apply to any defects caused by negligence, misuse,
improper assembly, or maintenance, accident, or “act of God.”
• This warranty does not apply to discoloration of paints or plastics.
• LifeSpan shall not be responsible for incidental or consequential damages.
• This warranty is non-transferable from the original owner.
Registration
Should you need to process a warranty claim make sure you retain your
purchase receipt to verify the date of purchase and register your LifeSpan
product online.
8

Getting Started
Safety First
When using active workstations, basic precautions shouldalways befollowed,
including:
• Never drop or insert any object into any opening. If an object falls into an
opening, turn the power off and unplug the power cord from the outlet.
• Never operate this treadmill if it has been damaged or partially
submersed in water.
• To reduce the risk of electric shock, unplug the treadmill from the wall
outlet when not in use, before performing any maintenance, or before
moving the treadmill.
• Do not use outdoors or in areas of high humidity or extreme temperature
changes.
• Do not operate where aerosol spray products are being used or where
oxygen is being administered.
• Never place the power cord under carpeting or place any object on top
of the cord, this may pinch or damage the cord causing fire damage or
personal injury.
• Use this product for its intended use as described in this Owner’s Manual.
Do not use attachments that are not recommended by LifeSpan.
• Do not leave your treadmill running while not in use.
Children and Pets
• Keep children from playing on your treadmill at all times.
• When in use children and pets should be kept at least 10 feet (3m) away.
• This treadmill should only be used by those 12 years of age and older.
Users, especially those with known health conditions, should consult a
physician prior to beginning an activity program..
• Cleaning and user maintenance shall not be made by children without
supervision.
9

Getting Started
Safety Tips While in Use
• Always consult a physician before beginning anexercise program.
• If you experience chest pains, nausea, dizziness or shortness of
breath, stop exercising immediately and consult your physician before
continuing. Do not wear clothing or jewelry that might catch on any
partof thetreadmill.
• Wear shoes with high traction rubber soles. Do not wear shoes with
heels, leather soles, cleats or spikes.
• Do not walk or run backwards on the treadmill, always face forward.
• Allow the running belt to fully stop prior to getting off the treadmill.
• Make sure the area behind the treadmill remains completely clear
during use. A minimum of 3 feet (1m) of clearance is required for safety
reasons. There should be a minimum of 2 ft. (.6 m) on at least one side of
the treadmill.
10
Note: Read all instructions and save for future reference.
Safety Clearance

Treadmill Base
13

About Your Treadmill Base
Specifications
TR800B
TR1200B
Speed Range
0.4 - 4.0 mph (0.6 - 6.4 kph)
Walking Belt Size
20" x 50" (51 cm x 127 cm)
Roller Size
Tapered Front 2.4” (6 cm), Rear 2.0” (5 cm)
Deck
3/4" (1.9 cm) Phenolic Deck
Deck Suspension
6 Independent Compression Shocks
Drive Motor
2.25 HP Continuous Duty DC
Max User Weight
350 lbs. (159 kg)
Dimensions
64” L x 29” W (160 cm x 73.7 cm)
TR5000B
Speed Range
0.4 - 4.0 mph (0.6 - 6.4 kph)
Walking Belt Size
20" x 50" (51 cm x 127 cm)
Roller Size
Tapered Front 2.4” (6 cm), Rear 2.0” (5 cm)
Deck
1" (2.5 cm) Phenolic Deck
Deck Suspension
6 Independent Compression Shocks
Drive Motor
3.0 HP Continuous Duty DC
Max User Weight
400 lbs. (182 kg)
Dimensions
64” L x 29” W (160 cm x 73.7 cm)
14
Speed Range
0.4 - 4.0 mph (0.6 - 6.4 kph)
Walking Belt Size
18" x 45" (45.7 cm x 111.7 cm)
Roller Size
Tapered Front 2.4” (6 cm), Rear 2.0” (5 cm)
Deck
3/4" (1.9 cm) Phenolic Deck
Deck Suspension
6 Independent Compression Shocks
Drive Motor
2.0 HP Continuous Duty DC
Max User Weight
300 lbs. (136 kg)
Dimensions
60.5” L x 26” W (153.6 cm x 66 cm)

About Your Treadmill Base
Proper Grounding
LifeSpan equipment must be grounded. Improper connection of the
equipment’s grounding conductor can result in the risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided
with the product or use a ground plug adapter to adapt to a non-grounded
outlet. If the plug will not fit in the outlet, have the proper outlet installed by a
qualified electrician.
Power Cord Options
This treadmill should only be used with the proper power cord and power
outlet. Several power cord options (shown below) are available from LifeSpan.
We do our best to include the correct power cord with the treadmill for your
area. In the event that the correct power cord is not included in the packaging
please contact your local distributor.
Treadmill Outlet
DATA
PORT
POWER
SOCKET
SWITCH
AC POWER
OVERLOAD
SWITCH
Do not use extension cords between the treadmill and power outlet.
Do not plug into a GFI outlet or circuit as it may trip the breaker.
15
Power Cord Options
!
!

Maintenance and Tips
Daily Cleaning
It is recommended to wipe the treadmill down after each use to keep the
treadmill clean and dry. A mild detergent may be used at times to help
removeall dirt and salt from the belt, painted parts and the display.
Monthly Cleaning
This cleaning includes removing the motor cover and cleaning around the
motor and electronics. It isrecommended to clean the motor compartment if
the treadmill is inan area where there might be plush carpet fibers that could
get pulled up into the motor compartment. It is a good idea at this time to
tighten all assembly hardware and check power cord for damage, or anything
else that would indicate the need for service.
Safety and Integrity
The safety and integrity designed into the machine can only be maintained
when the treadmill is regularly examined for damage and repaired. Worn
or damaged components shall be replaced immediately or the treadmill
be removed from service until the repair is made. Pay special attention to
components most susceptible to wear.
WARNING: Keep treadmill stable on flat ground.
WARNING: Unplug the power cord before removing the motor cover.
IMPORTANT: If service is required, turn the power off and remove the
power cord to ensure the unit cannot be used. Let all other users know
the treadmill needs service.
CAUTION: Acidic cleaning detergents may damage painted or powder
coated surfaces and should not be used. Such cleaners may void the
LifeSpan warranty.
16
!
!

Maintenance and Tips
Belt Lubrication
Use only 100% silicone and avoid using aerosol silicone sprays which include
additives and petroleum distillates. One ounce of silicone should be used for
each application.
The walking belt comes pre-lubricated from the factory. The TR800B and
TR1200B should be lubricated every 50 hours of use. The TR5000B comes with
a maintenance free belt and doesn’t require lubrication.
To lubricate, unplug your TR800B and TR1200B. Slide your hand under the
belt and lift the belt away from the deck. Apply about a dozen sprays toward
the center of the belt from each side. Rotate the belt 1/3 and repeat this
application. Rotate another 1/3 and repeat once more. Plug the treadmill in
and walk for a few minutes to disperse lube evenly.
17
NOTE: When lubricating the belt, make sure the treadmill is ona surface
that can be easily cleaned. After lubricating clean any excess silicone off
the walking surface of the belt and side rails.

Maintenance and Tips
Belt Tensioning
If the belt begins to slip and needs to be tensioned, tension bolts are
accessible from the back of the treadmill. Before tensioning the belt, start the
treadmill and set the speed to 3 mph (5 kph).
A. Using a 6 mm Allen wrench, included in your hardware bag, turn the
right and left tension bolts 1/2 turn clockwise.
B. Test to see if the slipping is eliminated. If the belt slips repeat step A and
test again.
CAUTION: DO NOT tighten more than 2 full turns on each side.
Over tensioning the belt can cause unnecessary friction and wear
and tear on the belt, motor and electronics.
Belt Alignment
A. Press Start, then increase the treadmill speed to 3 mph (5 kph).
B. Stand behind the treadmill to see which way the belt is drifting.
C. If the belt drifts to the left, turn the left adjustment bolt 1/4 turn
clockwise and the right adjustment bolt 1/4 turn counter-clockwise.
(See FIG. 1)
D. If the belt drifts to the right, turn the left adjustment bolt 1/4 turn
counter-clockwise and the right adjustment bolt 1/4 turn clockwise.
(See FIG. 2)
E. Observe the alignment for two minutes. Repeat steps A-D as needed.
18
Note: Adjusting one side more than the other will cause the belt to
drift to the side of the treadmill and will require belt alignment. Check
to be sure the running belt is still aligned. If belt alignment is off as
shown below, refer to Belt Alignment section.
Turn both
Clockwise
to Tighten belt
Turn both
Counter-clockwise
to Loosen belt

Maintenance and Tips
Belt Alignment (continued)
Moving the Treadmill
1. Make sure the ON/OFF switch is turned OFF. Unplug the power cord and
data cable from the treadmill.
2. Make sure nothing is on or near your treadmill which might spill, be
knocked off, or prevent the treadmill from moving.
3. Place both hands under the support bar located under the back of the
walking belt to make sure you have a solid lifting point.
4. Lift the back of the treadmill and roll to the desired location.
CAUTION: When lifting, use proper safety precautions and lifting
techniques. Bend your knees and elbows, keep your back straight
and lift evenly with both arms.
19 19
To move belt to the Right
Figure 1
To move belt to the Left
Figure 2

Desk
DT5
21

Desk Assembly
At LifeSpan we strive to make our equipment easy to assemble and use.
Prior to starting the assembly process, take all the parts out of the box,
remove plastic bags, and lay everything out on the floor to become familiar
with the components.
Since your desk is a heavy piece of equipment, itis recommended that you
use two people during assembly and follow these assembly instructions to
reduce any problems that may occur.
22
9
Desktop Ships Separately
3
1
8
10
11
11
4
5
2
7
Tool Bag - Contents
6
5mm Allen 4mm Allen 13mm Open
Wrench Wrench Wrench
w/Phillips

Desk Assembly
Hardware Included
Bag #
Item #
Qty.
Part Description
1
11
2
Height Adjustment Knobs
2
12
6
M8 x 12L Screws/Washers
3
13
8
M8 x 55L Bolts/Washers
4
14
4
M8 x 70L Bolts/Washers/Nuts
5
15
8
M6 x 15L Screws/Washers
6
10
2
Cable Routing Ties
23
Item#
Part Description
1
Reinforcement Frame
2
Data Cable
3
Desktop
4
Right Leg
5
Left Leg
6
Left Base Foot
7
Right Base Foot
Item#
Part Description
8
Left Desk Support Bracket
9
Right Desk Support Bracket
10
Cable Routing Ties
11
Height Adjustment Knob
Adjustment
Knob (x2)
STEP 1BAG
M8x12L (x6)
STEP 2BAG
M8x55L (x8)
STEP 3BAG
M8x70L (x4)
STEP 4 BAG
M6x15L Screw
(x8)
STEP 5 BAG
Cable Ties (x2)
STEP 6BAG

Desk Assembly
Step 1: Install the Height Adjustment Knobs onto the Right and Left Legs
A. Install a Height Adjustment Knob(11) on both the Right Leg(4) and Left
Leg(5) being sure that the locking pin goes into one of the adjustment
holes in each leg.
B. Tighten the Height Adjustment Knobs. Be sure the Legs are adjusted to the
same height when installing the Height Adjustment Knobs.
24
LOCATE BAG LABELED 1
Contents: 2 each Height Adjustmemt Knobs
NOTE: Make sure that the
Data Cable isn’t set hard
on the ground which
could damage the wire.
5
4
11
Adjustment
Knob (x2)

Desk Assembly
Step 2: Attach Right and Left Side Bracket
A. Add the Right Desk Support Bracket(9) to the Right Leg(4). Each will have an
“RRR” sticker attached for easy identification.
B. Stand the Right Leg(4) shown in the illustration below and align the Right
DeskSupportBracket(9).
C. Attach Right Bracket to the Leg with the M8x12LScrews(12). Securely
tighten with the included 5mm Allen Wrench.
D. Repeat for the Left Desk Support Bracket(8) and Left Leg(5).
25
LOCATE BAG LABELED 2
Contents: 6 each M8x12L Screws with Washers
4
5mm Allen
Wrench w/
Phillips
9
NOTE: Makesurethatthe
Data Cable isn’t set hard
on the ground which
could damage the wire.
M8x12L (x6)