Lifetime 80339 User manual

TABLE CART
Icon Legend
Warnings & Notices
Parts Identifier
Lower Frame Assembly
Upper Frame Assembly
Base Assembly
Cleaning & Care
Registration
Lifetime tables carts are designed to be strong and
durable. We strive to make assembly as easy as
possible without compromising quality. If you
get stuck, we have tools to help:
•Level Ground
Assemble the Table on level ground
•Recruit Friends and Family
Assembly should take 2 people about 1–2
hours to complete.
TOOLS REQUIRED TABLE OF CONTENTS
1/2” (13 mm)
9/16” (14 mm)
DNU 3/16” (x1)
(Provided)

• Indicates special heed should be taken when reading.
• Indicates the parts to be used for a section.
• Indicates no parts required for a specifi c section.
• Indicates the hardware to be used for a section.
• Indicates no hardware required for a specifi c page.
• Indicates the tools to be used for a section.
• Indicates to use/not to use an electric drill for a specifi c step.
ICON LEGEND
1154390 B

English:
•Failure to follow these warnings may result in serious injury or property damage and will void warranty.
•To ensure safety, do not attempt to assemble this product without following the instructions carefully.
• Assemble the product on level ground.
• Two capable adults are required for assembly.
• All who participate in the assembly process should wear safety glasses throughout the assembly.
• Proper and complete assembly are essential to reduce the risk of accident or injury.
• Check all hardware for tightness before and during the usage season.
•Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
WARNINGS & NOTICES

EAS (x2)
EBJ (x2)
AMU (x2)
EAZ (x2)
EBB (x1)
EBF (x1)
23.7” (6.02 cm)
EBG (x2)
EBA (x1)
26.8” (68.07 cm)
EBE (x2)
EAY (x2)
23.4” (59.4 cm)
31.3” (79.5 cm)
23.4” (59,4 cm)
31.3” (79,5 cm)
EAX (x1) EBC (x1) EBD (x1)
27” (6.86 cm)
27” (6.86 cm)
27” (6.86 cm)
EBK EBL EBM
PARTS IDENTIFIER
BLISTER PACKS
LARGE PARTS

EAS (x2)
EBJ (x2)
AMU (x2)
EAZ (x2)
EBB (x1)
EBF (x1)
1/2” (x1)
13mm (x1)
9/16” (x1)
14 mm (x1)
1
23.7” (6.02 cm)
EBI (x2) DBA (x8)
EAV (x6)
EAQ (x2) EES (x2)
EAW (x8)
EET (x16)
EBK
Blister Pack
HARDWARE REQUIRED
Large Parts
PARTS REQUIRED
TOOLS REQUIRED
1LOWER FRAME ASSEMBLY
1

TOOLS AND HARDWARE REQUIRED
EBF
EBB EAZ
EAZ
EBI
EBI
EAV
EAV
DBA
DBA
EET
EET
EET
EET
DBA
DBA
DBA (x4)
EBI (x2)
EET (x4)
EAV (x2)
1/2” (x1)
13 mm (x1)
uSECTION 1 (CONTINUED)
1.1
1.2
•Insert the ends of the two Side Frames (EBB &EBF) into the front and rear Braces (EAZ). Align the holes.

9
TOOLS AND HARDWARE REQUIRED
1/2” (x1)
13 mm (x1)
EBJ
EBJ
EAV
AMU
AMU
EAV
EET
EET
DBA
DBA
DBA (x4) EET (x4)EAV (x4)
uSECTION 1 (CONTINUED)
1.3
1.4
•Secure the Wheel Brackets (EBJ) to the Side Frames. Do not overtighten.
•Slide the Front Wheels (AMU) down inside the Side Frames.

TOOLS AND HARDWARE REQUIRED
EAQ
EES
EES
EAQ
EAW
EAW
EAS
EAS
EET
EET
EAQ (x2)
EES (x2)
EAW (x8)
EET (x8)
1/2” (x1)
13 mm (x1)
9/16” (x1)
14 mm (x1)
uSECTION 1 (CONTINUED)
1.5
1.6
•Secure the Front Wheels to the Side Frames. Do not overtighten.
•Secure the Rear Wheels (EAS) to the brackets on the back of the Side Frames. Do not overtighten.

11
2
EBG (x2)
EBA (x1)
26.8” (68.07 cm)
EBE (x2)
EAY (x2)
23.4” (59.4 cm)
31.3” (79.5 cm)
23.4” (59,4 cm)
31.3” (79,5 cm)
1/2” (x1)
13 mm (x1)
DNU
DNU
EAU (x14)
EET (x14)
EBL
UPPER FRAME ASSEMBLY
2
Blister Pack
HARDWARE REQUIRED
Large Parts
PARTS REQUIRED
TOOLS REQUIRED

12
TOOLS AND HARDWARE REQUIRED
EBE
EBE
EAU
EET
EAU (x4)
EET (x4)
1/2” (x1)
13 mm (x1)
DNU
uSECTION 2 (CONTINUED)
2.1
2.2
•Slide a Rear Vertical Support Tube (EBE) over the Side Frame and align the holes.
•Secure the Tube to the Side Frame. Do not overtighten. Repeat these steps for the second Rear Vertical Support Tube.

13
TOOLS AND HARDWARE REQUIRED
EAY
EAY
EAU
EET
EAU (x4)
EET (x4)
1/2” (x1)
13 mm (x1)
DNU
uSECTION 2 (CONTINUED)
2.3
2.4
•Slide a Front Vertical Support Tube (EAY) over the Side Frame and align the holes.
•Secure the Tube to the Side Frame. Do not overtighten. Repeat these steps for the second Front Vertical Support Tube.

14
TOOLS AND HARDWARE REQUIRED
EBG
EBG
EAU EET
EET
EAU
EAU (x4)
EET (x4)
1/2” (x1)
13 mm (x1)
DNU
uSECTION 2 (CONTINUED)
2.5
2.6
•Slide a Horizontal Support Tube (EBG) over the Vertical Tubes and align the holes.
•Secure the Horizontal Tube to the Vertical Tubes. Do not overtighten. Repeat these steps for the second Horizontal Support Tube.

15
TOOLS AND HARDWARE REQUIRED
EBA
EAU
EAU
EET
EET
EAU (x2)
EET (x2)
1/2” (x1)
13 mm (x1)
DNU
uSECTION 2 (CONTINUED)
2.7
2.8
•Slide the Handle (EBA) over the Horizontal Tubes and align the holes.
•Secure the Handle to the Tubes. Do not overtighten.

16
3
EAX (x1) EBC (x1) EBD (x1)
27” (6.86 cm)
27” (6.86 cm)
27” (6.86 cm)
DBA (x14)
EET (x14)
EAV (x8)
EAW (x2) EBH (x4)
BASE ASSEMBLY
3
1/2” (x1)
13 mm (x1)
EBM
Blister Pack / Blíster / Plaquette
HARDWARE REQUIRED
Large Parts / Piezas grandes / Grandes Pièces
PARTS REQUIRED
TOOLS REQUIRED

17
TOOLS AND HARDWARE REQUIRED
EET
EAV
EBD
EET
DBA
EAV
EET
DBA
EET
EAW EAW
DBA (x4)
EET (x4)
EAV (x2)
DBA
DBA
EAW (x2)
1/2” (x1)
13 mm (x1)
uSECTION 3 (CONTINUED)
3.1
3.2
•Secure the Rear Panel (EBD) to the Side Frames. Tighten only by hand at this time.
•Secure the Rear Panel (EBD) to the Side Frame brackets. Tighten only by hand at this time.

18
TOOLS AND HARDWARE REQUIRED
EAX
DBA (x2)
EET (x2)
1/2” (x1)
13 mm (x1)
EAV
EET
EET
DBA
DBA
EAV
EAV (x2)
uSECTION 3 (CONTINUED)
3.3
3.4
•Flip the Cart on its side and secure the Rear Panel to the rear Brace. Tighten only by hand at this time.
•Set the Front Panel (EAX) over the Frame. Tighten only by hand at this time.

19
TOOLS AND HARDWARE REQUIRED
EBH (x2)
DBA (x4)
EET (x4)
EAV (x2)
EAV
EAV
1/2” (x1)
13 mm (x1)
EBH
EBH
DBA
EET
EET
EET
EET
DBA
DBA
DBA
uSECTION 3 (CONTINUED)
3.5
3.6
•Secure the Front Panel to the Brackets. Tighten only by hand at this time.
•Secure the Front Panel to front Brace. Tighten only by hand at this time.

20
TOOLS AND HARDWARE REQUIRED
EET
EET
DBA
DBA
EAV
EBC
EAV
EBH (x2)
DBA (x4)
EET (x4)
EAV (x2)
1/2” (x1)
13mm (x1)
EBH
EBH
EET
DBA
DBA
EET
uSECTION 3 (CONTINUED)
3.7
3.8
•Secure the Second Front Panel to the Side Frames. Tighten only by hand at this time.
•Secure the Front Panel to front Bracket. Tighten all hardware.

Congratulations on your Lifetime®product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment.
Abrasive cleaning materials may scratch the plastic and are not recommended. Repair scratches or rust spots on the metal by sanding the affected area
lightly; using a rust preventative spray primer; and fi nally, spraying with a high-gloss spray enamel paint.
Wir gratulieren Ihnen zum Erwerb Ihres Lifetime® Produkt. Wenn Sie die nachstehenden Anleitungen befolgen, wird Ihnen Ihr Lifetime-Produkt viele Jahre dienen und Ihnen Freude
bereiten.
Scheuermittel und Topfschwämme werden nicht empfohlen, da sie die Plastikteile zerkratzen können. Kratzer oder Rostflecken am Metall können
entfernt werden, indem man den betroffenen Bereich leicht abschleift, ein Rostschutzgrundierungsmittel aufträgt und die Fläche zum Schluss mit einem
Hochglanzlack besprüht.
Hartelijk gefeliciteerd met uw aankoop van een Lifetime® product. Als u de volgende aanwijzingen opvolgt, zal uw nieuwe Lifetime product jarenlang mee kunnen.
Schurende reinigingsmaterialen kunnen het plastic krassen en worden niet aanbevolen. U kunt krassen of roestvlekken op het metaal repareren door het
betreffende deel licht te schuren, een roestwerende spuitgrondverf aan te brengen en tenslotte een laagje hoogglansspuitlak aan te brengen.
Parabéns por ter adquirido o seu produto Lifetime®. Ao seguir as instruções abaixo, o seu novo produto Lifetime oferecer-lhe-á anos de serviço e usufruto.
Os materiais de limpeza abrasivos podem riscar o plástico, pelo que não são recomendados. Repare os riscos ou manchas de ferrugem no metal lixando
ligeiramente a área afetada; utilize um primário em spray para a prevenção da ferrugem e, finalmente, aplique uma tinta de esmalte em spray de brilho
elevado.
CLEANING & CARE
LIMPEZA E CUIDADOS A TER
REINIGUNG UND PFLEGE
REINIGING & VERZORGING
Learn more about patio furniture we have.