Lightmybricks 76989 User manual

LEGO HORIZON FORBIDDEN WEST
TALLNECK #76989 LIGHT KIT
INSTALLATION GUIDE

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO HORIZON FORBIDDEN WEST
TALLNECK 21332 INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Horizon Forbidden West Tallneck 21332 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
4 x Warm White 30cm Large Bit Lights
2 x Red & Blue 15cm Bit Light
2 x Blue 30cm Bit Light
1 x Warm White Strip Light
1 x 8-Port Expansion Board
1 x 6-Port Expansion Board
1 x 2-Port Expansion Board
3 x Adhesive Squares
• 4 x Round Tile 1x1 - Clear
• 4 x 1x1 Bracket - Light Grey
• 1 x 1x2 Brick - Black
• 4 x Arm Skeleton, Bent with Clips (Horizontal Grip) - Black
• 8 x Plate 1x1 Mod Rounded w Handle - Black
• 4 x Round Plate 1x1 Open Stud - Black
• 1 x Round Plate - 1x1 Trans Clear
1 x 50cm Connecting Cable
1 x 30cm Connecting Cable
1 x 15cm Connecting Cable
1x USB Power Cable

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
31
32
37

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO HORIZON FORBIDDEN WEST TALLNECK 76989 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1
Red & Blue 15cm Bit Light
2
3