Lightmybricks LEGO OPTIMUS PRIME User manual

LEGO OPTIMUS PRIME #10302
LIGHT KIT
INSTALLATION GUIDE

LEGO OPTIMUS PRIME 10302 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO OPTIMUS PRIME 10302
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Optimus Prime 10302 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO OPTIMUS PRIME 10302 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
4 x Orange 30cm Bit Light
4 x Cool White 30cm Bit Light
8 x Yellow 15cm Bit Light *
1 x Blue 30cm Bit Light
2 x Red 30cm Bit Light
1 x Blue 30cm Large Bit Light
1 x Cool White 30cm Large Bit Light
1 x Warm White Light String
4 x 8-Port Expansion Board *
7 x 2-Port Expansion Board
1 x Pulse Eects Board
1 x Flicker Eects Board
1 x Gun Eects Board
2 x Wireless Power Connectors
• 2 x 1x1 Round Plate - Trans Dark Blue
• 4 x 1x1 Round Plate Open Stud - Trans Orange
• 8 x 1x1 Round Plate - Trans Orange
• 4 x 1x2 Plate - Red
• 2 x 1x2 Plate - Trans Red
• 3 x 1x2 Plate - Trans Clear
• 1 x 2x2 Plate W Rounded Bottom - Trans Clear
• 1 x 1x1 Round Plate Open Stud - Black
• 1 x 1x1 Bracket - Light Grey
• 1 x 1x2 Plate - Black
• 1 x 2x2 Plate - Dark Grey
2 x 5cm Connecting Cables
7 x 15cm Connecting Cables
1 x 50cm Connecting Cables
1x USB Power Cable
(Power Source not Included) * Indicates components which include spares

LEGO OPTIMUS PRIME 10302 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
64
65
70

LEGO OPTIMUS PRIME 10302 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.