Lightmybricks LEGO Elf Club House Light Kit User manual

INSTALLATION GUIDE 1ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO®Elf Club House 10275
Light Kit Installation Guide

INSTALLATION GUIDE 2ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO®Elf Club House (10275)
Lighting Kit.
This PDF details the instructions for the
LED light kit only. If you are wishing to
purchase this LED Lighting Kit , please
click here to view the product page.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACKAGE CONTENTS
PACKAGE CONTENTS:
28 × Flashing White Micro 15cm Bit Lights
(26 required includes 2 extra)
6 x White 30cm Bit Lights
2 x White 15cm Bit Lights
1 x 12-Port Expansion Board
3 x Micro 2 to 8 Expansion Board
1 x Micro 2 to 4 Expansion Board
2 x 5cm Connecting Cables
2 x 30cm Connecting Cables
1 x AA Battery Pack
(requires 3x AA Batteries)
LEGO PIECES:
3 × Black Plate 1x2
1 × Black Round Plate 1x1 w Open Stud
1 × Black Tile w Clip Round Edges
 1×BlackPlateModiedwHandle
1 × Trans Clear Plate 2x2 w Rounded Bottom
1 × Trans Clear Round Plate 1x1
2 × Trans Red Round Plate 1x1
2 × Trans Dark Blue Round Plate 1x1
2 × Trans Dark Green Round Plate 1x1
2 × Trans Yellow Round Plate 1x1

ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3
Contents 4. Before You Begin
8. Instructions
33. Final Product
34. Troubleshooting
39. Contact
CONTENTS

ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN

ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN

ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN

INSTALLATION GUIDE 7ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS

ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
12
STEPS
White 30cm Bit Light
3

ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 9
4
STEPS
12-Port Expansion Board
AA Battery Pack
Ensure you rst
insert 3x NEW
AA Batteries
White 30cm Bit Light
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

ELF CLUB HOUSE 10275 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
5