Lightmybricks 21333 User manual

LEGO® VINCENT VAN GOGH -
THE STARRY NIGHT #21333 LIGHT KIT
INSTALLATION GUIDE

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO VINCENT VAN GOGH - THE STARRY
NIGHT 21333 INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Vincent Van Gogh - The Starry Night 21333 Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
8x White 30cm Bit Light *
5x Yellow 30cm Bit Light
4x Large Warm White 30cm Bit Light
1x Large Cool White 30cm Bit Light
1x 2-Port Expansion Board
1x 8-Port Expansion Board
1x 12-Port Expansion Board
4x Adhesive Squares
• 2x Plate 1x2 MW Handle On End - Black
• 3x Arm Skeleton, Bent with Clips at 90 degrees - Black
• 4x Plate 1x1 Mod Rounded w Handle - Black
• 3x 1x1 Round Plate Open Stud - Black
• 6x 1x1 Round Plate - White
• 2x 1x1 Round Plate - Trans Clear
• 2x 1x1 Round Plate - Trans Orange
• 2x 1x1 Round Plate - Trans Yellow
• 2x 1x1 Round Plate - Trans Light Blue
1x 30cm Connecting Cable
1x 50cm Connecting Cable
1x USB Power Cable
(Power Source not Included)
* Indicates components which include spares

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
32
33

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1
Gently disconnect
the frame from
the painting as the
painting will fall if not
supported

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2
3
Use the LEGO
Brick Separator Tool
or similar to pry parts
Carefully pry this
section apart from
the side and back
Pry along the
same line of bricks
until this point then
split the wall
1x1 Round Plate Open Stud -
Black
White 30cm Bit Light

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
4
x3
Plate 1x1 Mod Rounded w
Handle - Black
Plate 1x2 MW Handle On End
- Black
Arm Skeleton, Bent with Clips
at 90 degrees - Black

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
5 6
Plate 1x2 MW Handle On End
- Black
Plate 1x1 Mod Rounded w
Handle - Black

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
7
8
Yellow 30cm Bit Light
1x1 Round Plate - Trans Yellow

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
9
Yellow 30cm Bit Light
Pull the spotlight
cables towards the
back as shown

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
10
12-Port Expansion Board

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
11
12
1x1 Round Plate - White 1x1 Round Plate - Trans Orange
Yellow 30cm Bit Light

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
13
14
Yellow 30cm Bit Light 1x1 Round Plate - White
Large Warm White 30cm Bit Light
Connect all the
three cables from step
12 and 13 to the 12-Port
Expansion Board

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the other
end to a 5V USB
Power Bank, 5V USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
USB Power Cable
2-Port Expansion Board
50cm Connecting Cable

LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
15
16
1x1 Round Plate - Trans Clear Ensure the three
cables are placed in
between studs and
running out the back
White 30cm Bit Light