Lightmybricks LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING... User manual

LEGO® HARRY POTTER THE SHRIEKING
SHACK & WHOMPING WILLOW #76407
LIGHT KIT
INSTALLATION GUIDE

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
2
Light My Bricks
LEGO HARRY POTTER THE SHRIEKING SHACK
& WHOMPING WILLOW 76407
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO
Harry Potter The Shrieking Shack & Whomping Willow 76407
Light Kit.
This PDF details the instructions for the LED light kit only.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!
INSTALLATION GUIDE

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS: ASSORTED BRICKS:
2 x Orange 30cm Bit Light
1 x Yellow 30cm Bit Light
2x Cool White 30cm Bit Light
1 x Cool White 30cm Large Bit Light
1 x Orange 30cm Large Bit Light
1 x 6-Port Expansion Board
1 x Flicker Eects Board
4 x Adhesive Squares
•1 x Round Plate 1x1 - Trans Clear
•1 x Plate 1x2 - Trans Clear
•3 x Plate 1x1 Mod Rounded w Handle - Black
•2 x Round Plate 1x1 Open Stud - Black
•1 x Arm Skeleton, Bent with Clips at 90 degrees - Black
1x 5cm Connecting Cable
1x USB Power Cable
(Power Source not Included)

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin
Blueprint
Instructions
Final Product
Troubleshooting
Contact
5
8
10
28
29
34

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can re-
sult in bent pins inside the port or possible
overheating of the expansion board when
connected.

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGENDLEGEND:: DISCONNECTDISCONNECT DIRECTIONALDIRECTIONAL
LEGENDELEGENDE:: TRENNENTRENNEN DIRECTIONALDIRECTIONAL
LÉGENDELÉGENDE:: DÉCONNECTERDÉCONNECTER DIRECTIONNELDIRECTIONNEL
LEGGENDALEGGENDA:: SCOLLEGARESCOLLEGARE
CONNECT / CONNECT / RECONNECTRECONNECT
VERNINDEN VERNINDEN / WIEDERVERBINDEN/ WIEDERVERBINDEN
CONNECTER CONNECTER / RECONNECTER/ RECONNECTER
CONNETTI / RICONNETTICONNETTI / RICONNETTI
TURN TURN / / FLIPFLIP
WENDEN WENDEN / KIPPEN/ KIPPEN
TOUR TOUR / INCLINAISON/ INCLINAISON
ROTARE ROTARE / INCLINARE/ INCLINARE DIREZIONALEDIREZIONALE
TWIST TWIST / BRAID/ BRAID
DREHEN DREHEN / VERDREHEN/ VERDREHEN
TORSION TORSION / TRESSER/ TRESSER
TWIST TWIST / / TRECCIATRECCIA
POWER POWER ON ON / TEST/ TEST
EINSCHALTEN EINSCHALTEN / TESTEN/ TESTEN
POWER POWER ON ON / / TESTTEST
POWER POWER ON ON / / TESTTEST

LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING WILLOW 76407 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
1
2
Orange 30cm Bit Light