Lightolier Lytecaster 1104ICR User manual

Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • I0711
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster®Recessed Downlighting 1104ICR
Page 1 of 1 6 3/4" Aperture 0
® Incandescent Convertible IC/Non-IC Remodeler Frame-In Kit
4
5
1
3
2
6 7/8"
13 1/8"
Overall Length
Frame-In Kit
Top View
Reflector Trim
Ceiling Opening 7" Diameter
Features
1. Housing: .032 (#20 ga.) Aluminum. U.L. listed convertible IC/NON-
IC. Integral retaining spring secures housing to ceilings up to 2” thick.
Removable for access to junction box and ceiling plenum.
2. Junction Box: 2 1/2” X 2 1/2” X 3 1/2” (21 cu. in.) .032 (#22 ga.) galva-
nized steel. U.L. listed for 90°C supply wire. Integral cable clamps permit
attachment of non-metallic (#12 or #14 ga.) Romex® cable without tools or
additional connectors.
3. Socket Housing: Impact extruded aluminum or galvanized steel. Attached
trim retaining spring secures trim to any height on housing wall.
4. Socket: Porcelain medium base: nickel plated screw shell. Pre-wired with
#18 ga. SF1 (300 VOLT 200°C) leads to junction box.
5. Thermal protector: Meets NEC and U.L. requirements. Located inside housing.
Options & Accessories
AirSeal®Kit: LAS56R
(Required for AirSeal® installation)
Labels
UL (Type IC/NON-IC Convertible, Suitable for Damp Locations).
Romex® is a registered trademark of General Cable Industries Inc.
7 1/2”
Complete Fixture consists of Reflector Trim & Frame In Kit. Select each seperatly
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
1104ICR Open Downlight
Eyeball Enclosed
Diffusers
Wall
Washer
Specular
Reflector
Specular
Cone
Satin
Cone
Cross
Blade Baffles Basic White
1143
1144
1144CD
1112†
1113†
1113BK†
1113CD†
1113WH†
1108†
1110†
1132
1132A
1105†
1105WH
1176
1176WH
1176PB
1179M1
1179WH
1105BNM
1170M1
1171
1182 1121
1124
1126*
1128*
1134*
1177SH*
1178SH*
1177LX
1178LX
1190
1185*
1186*
1186WH*
Open Wet
1181WH
1181CD
* For Non-IC applications only.†Add NM to catalog number for Natural Metal flange and finish.