Lightolier Tangent FXPDT User manual

Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • 0907
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Tangent™Track Lighting System FXPDT
Page 1 of 1 Pendant Adapter
Features
1. Track Attachment fitting: Molded thermoplastic clamping adapter with
captive, nickel-plated steel pin. Clockwise rotation of pin secures fixture
adapter to track.
2. Splicing Chamber: Allows for field cutting of power cord and aircraft
cable (if applicable).
For use only with pendants that meet the following criteria:
• Total weight of all components being attached to adaptor does not
exceed 2.5 lbs.
• Pendant Cord Type is 1/4" dia. 18 ga. 3-wire, 300V min. SVT, with .062 dia.
aircraft cable, or without aircraft cable.
• Pendant is rated 120V/60Hz., .83A max, 100W max.
Ordering Information
Catalog No. Finish Track Mountings Lamping
FXPDT Silver For use on all Tangent Track systems. For ceiling
or suspended track installation. Not for use on
wall mounted track.
100W Max
1"
[27 mm]
3 3/8"
[84 mm]
1"
[27 mm]
1
2
3 3/8"
[84 mm]
Finish
All Painted finishes are baked enamel.
Accessories
No accessory capability.
Labels
cULus Listed