Indiana Furniture 620-3333CGT User manual

Plush Lounge
Corner Table Ganging Assembly Instructions
1
2
Start by laying the chairs that are going to be ganged
to the table on their back.
Attach the metal ganging plates to the chair, as
shown, with the smaller slots on the chair side. Use
the 1-1/2” long bolts to attach the plate to the chair.
Do not fully tighten the bolts yet. Leave them
loose for final adjustments.
800-422-5727
www.IndianaFurniture.com
Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
Page 1 of 4
Ganging:
Note: Images shown are for clarity purposes only and may not match the unit that you are currently ganging together.
Position the table next to the first chair to be
ganged.
Note: Make sure the insert nuts for the second chair
are oriented in the correct direction for the desired
layout.
Note: These instructions only apply to 620-3333CGT & 620-
3333CGTT.
Second Chair to
gang to this side

Plush Lounge
Corner Table Ganging Assembly Instructions
34
Attach the table to the metal ganging plates.
For units without the Plinth option use ¾” long bolts.
For units with the Plinth option use 1-1/2” long bolts.
Once all the bolts are started, push the units
together and tighten all 12 bolts holding on the
ganging brackets.
Repeat step 1 for the second chair to be ganged.
800-422-5727
www.IndianaFurniture.com
Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
Page 2 of 4
Note: Images shown are for clarity purposes only and may not match the units that you are currently ganging together.
5With some help, carefully rotate upright the all
the units.

Plush Lounge
Corner Table Ganging Assembly Instructions
67
Push the second chair up to the assembled unit.
Make sure to align the holes on the brackets with the
inserts in the table.
Use a short screwdriver or a right-angle drill to install the
bolts into the bottom of the table.
For units without the Plinth option use ¾” long bolts.
For units with the Plinth option use 1-1/2” long bolts.
Once all the bolts are started, push the units together and
tighten all 12 bolts holding on the ganging brackets.
Assembly is complete after this step.
800-422-5727
www.IndianaFurniture.com
Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
Page 2 of 4
Note: Images shown are for clarity purposes only and may not match the units that you are currently ganging together.

Plush Lounge
Corner Table Ganging Disassembly Instructions
12
Use a short screwdriver or a right-angle drill to
remove the bolts from the bottom on one side of the
table.
Pull the units apart and rotate them onto their
backs.
800-422-5727
www.IndianaFurniture.com
Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
Page 4 of 4
Note: Images shown are for clarity purposes only and may not match the units that you are currently ganging together.
Disassembly:
3Remove the ganging plates by removing all bolts
from the table & chairs holding them on.
4Rotate the units back upright. Disassembly is now
complete.