Lightolier QVS2GPFOS232 User manual

Mounting Methods / Features Dimensions
Microperforated mesh
lamp shields
Also available with solid opaque swing-
down lamp shield
Ceiling compatibility
Swing down optical system for
easy relamping and maintenance
Suited to standard exposed
T-grid ceilings
Suited to standard exposed
Slot T-grid ceilings
ALTER SOFT LIGHTS QVS2GPFOS232
Page 1 of 2 2’ X 4’ RECESSED DIRECT/INDIRECT FLUORESCENT 2 LAMP, T8,
5 1/2” DEEP MICROPERFORATED MESH LAMP SHIELD
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 5 / Folio L30-10
Features
•Efficiency 56.9%.
•Swing down microperforated lamp shield for easy
relamping and maintenance.
•Alter soft white film on inside of mesh conceals lamp
image providing balance between reflected and
direct light.
•Fully recessed luminaire and lamp compartment.
•95% Reflective Alter soft white paint finish.
•Specular interior reflector.
•One piece body for easy installation.
•Easy access to ballast through lamp compartment.
•Fits standard T-Grid ceilings.
•Optional acrylic drop-down visual element.

Ordering Information Explanation of Catalog Number Example: QVS2GPFOS232120SO
QUALITY
VISUAL
STATIC
Recessed direct
indirect soft
light
optical system FIXTURE
WIDTH:
2’
CEILING TYPE:
Standard
exposed
T-grid ceilings
LAMP SHIELD:
PF = Microperforated
SD = Solid
CLEAR POLISHED
ACRYLIC DROP
DOWN VISUAL
ELEMENT:
OS =Open slot (no acrylic)
OP = One Piece (no center slot)
GC = Clear acrylic
GG = Clear acrylic / Green projected color face
GB = Clear acrylic / Blue projected color face
GR = Clear acrylic / Red projected color face
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH:
(NOMINAL 24”)
32 = 32W T8
VOLTAGE:
120V
277V
347V
BALLAST:
OC =Magnetic T8
SO =Electronic T8 instant start
SR =Electronic T8 rapid start
PS =PowerSpec
HDF Dimming T8 (Not available in 347V.)
OPTIONS:
R =Radio Interference Filter
O = Emergency Lighting System
(for Canada)
N= Emergency Lighting System
(for U.S.)
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge cold
rolled steel. Reflectors - 95% reflectance baked white acrylic matte paint fin-
ish. Specular interior reflector. Soft white acrylic film on inside of lamp shield
conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast. If K.Os are
within 3” of ballast use wire suitable for at least 90C.
Photometry
QVS 2 G 2 32
ALTER SOFT LIGHTS QVS2GPFOS232
Page 2 of 2 2’ X 4’ RECESSED DIRECT/INDIRECT FLUORESCENT 2 LAMP, T8,
5 1/2” DEEP MICROPERFORATED MESH LAMP SHIELD
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 5 / Folio L30-10
Job Information Type:
LABELS: Listed by