Linak Techline Linear Actuator Technology User manual

LINEAR ACTUATOR TECHNOLOGY
THE COMPLETE TECHLINE®PRODUCT RANGE

1
2
3
4
5
6
7
8
9
10 11
12
13
14
2
THE COMPLETE TECHLINE™
PRODUCT RANGE
1. Turnable back fixture in steps of 30 degrees
2. Optional positioning feedback: Potentiometer or Hall effect sensor
3. Hand crank for manual operation
4. Brake
5. Overload clutch
6. Thermal switch in motor
7. 12, 24, or 36 V DC motor
8. Aluminum housing coated according to corrosion class 4
9. Exchangeable cables
10. High-pressure cleaner proof
11. Built-in end-stop switches (optional)
12. Anodised outer tubes
13. Stroke length up to 999 mm
14. Piston rod eye for ½” or 12 mm PIN
LINAK actuator systems ease the load and make work easier. The
remarkably wide product range offers something for any imaginable
type of movement.
With these actuator systems you can easily reach inaccessible places,
open or close sun blinds and roof windows, regulate ventilators,
close gates automatically - and save yourself exertion.
Workstations and production lines can be set up individually to
increase efficiency and comfort.
For detailed information - please use data sheets
Specifications subject to change without prior notice.

3
ACTUATOR
There is a colossal number of very different applications in the
industrial sector. To ensure that we focus on exactly the application
you need we have divided the industrial market into three segments,
which share some of the same characteristics and requirements for
linear actuators: MOBILE, MACHINERY & WORKSPACE, and BUILDING
& CONSTRUCTION
LINAK has a wide experience in integrating actuators into applications
and developing solutions, which fit discretely into work processes
- so do not hesitate to contact us.
ELECTRONICS
COLUMN
DESK PANELFOOT SWITCH
CONTROL BOX HANDSET
LINEAR ACTUATOR TECHNOLOGY

4
ACTUATORS
LA12/
LA12 PLC
Thrust: Max. 750 N
Speed: 5-50 mm/s
Stroke length: 40-130 mm
Duty Cycle: Up to 100%
Voltage: 12/24 V DC
End-stop: Built-in limit
switches
Options:
• PLC interface
• Potentiometer
• Reed switch
• IP 66 housing
Scope of application:
• All kinds of mobile applications
• Factory automation
• Ventilation
• Valves
• Dosage
The LA12 actuator is ideal for
industrial automation, ventilation
systems, and other applications
where small movements are
required.
With LA12 PLC interface.
For detailed information - please use data sheets
Specifications subject to change without prior notice.
Facts:
• Compact and lightweight
• Reinforced glass fibre
Thrust: Max. 6,000 N
Speed: 10-52 mm/s
Stroke length: 50-500 mm
Duty Cycle: 10%
Voltage: 12, 24, or 36 V DC
End-stop: LS/LSD or current
cut-off
Options:
• Powerful strong motor
• Potentiometer
• Reed switch
• Optical encoder
• IP 66 housing
• Hand crank for manual operation
• Ball screw spindle
• Safety nut
Scope of application:
• Agricultural applications
• Lawn and garden equipments
• Floor sweepers
• Satellite dishes
• All kinds of industrial applications
The LA30/30S actuator is a very
versatile actuator for industrial
and system applications. It can
be supplied in many customised
versions, also wheelchairs.
Facts:
• Solid metal construction
• Compact and powerful
• Suitable for harsh conditions
LA30

5
LA35
Flexible and powerful:
• Max thrust up to 6,000 N in push
and up to 4,000 N in pull
• Heavy-duty aluminimun
housing for harsh conditions
• Protection class IP66 dynamic,
IP69K static
• Stroke up to 600 mm
• Easy to use interface – with
integrated power electronics
for direct connection to control
system
• Potential free limit switches as
an option
• Hall sensors or potentiometer
for relative or absolute feedback,
regardless of the stroke length.
• Built-in limit switches and brake
• Voltage 12 or 24 V DC
Scope of application:
• Agricultural applications
• Mobile “off-highway” applications
• Floorsweeper and scrubber
• All kinds of industrial equipments
The LA35 actuator is a new member
of the TECHLINE™ family. It is
characterised by its robust design
allowing the actuators to be used in
harsh and extreme conditions.
The LA35 actuator is designed to
meet the challenge, based on the
philosophy that it must be able to
operate on off-highway equipment
such as agriculture, forestry
and construction machines.
LINEAR ACTUATOR TECHNOLOGY
LA36
Thrust: 10,000 N
Speed: 8-150 mm/s
Stroke length: 100-999 mm
Duty Cycle: 20%
Voltage: 12, 24, 36 V DC
End-stop: Slip clutch or
built-in limit
switches
Options:
• Potentiometer
• Hall effect sensors
• Adjustable signal swiches
• Integrated electronics
Scope of application:
• Agricultural applications
• Mobile “off-highway” applications
• Floorsweeper and scrubber
• All kinds of industrial equipments
The LA36 actuator is the newest actuator from LINAK®. It has been developed
for harsh conditions and is the most robust actuator in our programme.
The flexibility and integrated electronics makes it suitable for a vast number of
different applications
Facts:
• Solid metal construction
• Hand crank for manual operation
• Suitable for very harsh conditions
• Salt spray testet
• High presure cleaner-proof

6
ACTUATORS
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LA28
Thrust: Max. 3,500 N
Speed: 3-46 mm/s
Stroke length: 100-600 mm
Duty Cycle: 10%
Voltage: 12/24 V DC
End-stop: Current cut-off
Options:
• Powerful strong motor
• Reed switch
• IP 66 housing
• Safety nut
• Integrated electronic limit switch
Scope of application:
• Agricultural applications
• Lawn and garden equipment
• Floor sweepers
• Factory automation
Facts:
• Powerful and quiet operation
• Reinforced glass fibre
• Use in “push” appliacations
• Compatible with CB8, CB12,
CB14, and CB18
The LA28/28S actuator (with standard
or fast motor) is a very quiet and
powerful actuator, designed for use
in the furniture, rehabilitation, and
hospital bed industries. Agricultural
machinery and other outdoor
equipment are also other main areas
of application.
Thrust: Max. 400 N
Speed: 13-37 mm/s
Stroke length: 50-200 mm
Duty Cycle: 10%
Voltage: 12/24 V DC
End-stop: LS/LSD or current
cut-off
Options:
• IP 65 housing
• Different back fixtures
• Various piston rod eyes
The LA22 actuator is an in-line
actuator specially designed with
small overall dimensions for use
in industrial, agricultural, and
rehabilitation products.
LA22
Scope of application:
• Agricultural applications
• Wheelchairs
• All kinds of industrial applications
Facts:
• Solid metal construction
• Unique space saving design
• Low noise level

7
LA31
The LA31
actuator is a
very quiet and
powerful actuator
designed for a variety of
applications including furniture, care
beds etc. It is designed with built-in
limit switches.
Thrust: Max. 6,000 N
Speed: 3-33 mm/s
Stroke length: 50-500 mm
Duty Cycle: 10%
Voltage: 12/24 V DC
End-stop: Built-in limit switches
Options:
• Reed switch
• Hall effect sensor
• IP 66 housing
• Safety nut
• Fast motor
Scope of application:
• Light mobile applications
• Factory automation
• All kinds of indoor applications
Facts:
• Numerous combinations of motor
and spindle pitches
• Zinc alloy back fixture
• Compatible with CB7 and CB9
LA32
The LA32 actuator is a very
quiet and powerful actuator,
designed for hospital beds, patient lifts,
and other demanding applications.
Thrust: Max. 6,000 N
Speed: 5,5-15 mm/s
Stroke length: 100-400 mm
Duty Cycle: 10%
Voltage: 12, 24, or 36 V DC
End-stop: Current cut-off
Options:
• Powerful strong motor
• Potentiometer
• Reed switch
• Optical encoder
• IP 66 housing
• Ball screw spindle
• Safety nut
• Integrated electronic limit switch
Scope of application:
• Agricultural applications
• Lawn and garden equipment
• Floor sweepers
• Factory automation
Facts:
• Powerful and quiet operation
• Reinforced glass fibre
• Use in “push” applications
• Compatible with CB8, CB12,
CB14, and CB18
Thrust: Max. 10,000 N
Speed: 5-18 mm/s
Stroke length: 100-600 mm
Duty Cycle: 10%
Voltage: 12/24 V DC
End-stop: Built-in limit switches
The LA34 actuator is an advanced,
high-tech actuator, which can push
up to 10,000 N. Its compact design,
outstanding performance, and range
of safety options makes the LA34
actuator the ideal choice for
a variety of medical and
industrial applications.
Options:
• Potentiometer
• Reed switch
• IP 66 housing
• Compact housing
• Safety nut
Scope of application:
• Mobile applications
• Factory automation
• Scissor lift
• Various numbers of indoor and
outdoor applications
LINEAR ACTUATOR TECHNOLOGY
LA34
Facts:
• Compact
• Outstanding performance
• Low noise level

8
For detailed information - please use data sheets
Specifications subject to change without prior notice.
LIFTING COLUMNS
The LC2 column is an update of
the LP2 programme. Depending
on the application, the LC2
column can be operated either
as a single column or several
columns in a parallel system by
the choice of a control box with
microprocessor
Thrust: 5,000 N
Speed: 22 mm/s
Max. Amp.: 6
Voltage: 24 V DC
LC2
Options:
• Different profiles
• Reed switch
• Different end plates
• Exchangeable cables
Facts:
• Bending moment 1,400 N
• Built-in end-stop switches
• Safety nut as standard
• Robust anodised aluminium surface
• Compatible with CB8, CB9, CB12,
CB14, and CB18
Scope of application:
• Height adjustable conveyours
• Factory automation
• Ergonomic work spaces
• Workstations
Thrust: Max. 1500 N
Speed: 43 mm/s
Stroke length: 500 mm
Duty Cycle: 5%
Voltage: 12/24 V DC
Options:
• Mounting bracket
(order number 0578006)
• Hall sensors to ensure memory
drive and parallel drive with CBD4
• CBD2 mounted in the DL2
The DL2 column is designed
for workstations and is the
ideal choice for duties such as
height adjustment on computer
workstations, work benches or
a wide selection of other duties.
Inside each column is a modified
LA31 actuator.
DL2
Scope of application:
• Computer workstations
• Work benches
• Platforms
Facts:
• Low noise level
• Compact and mounting
friendly design
• Single drive (CBD2 and CBD4),
parallel drive (only CBD4)

9
LP3
Thrust: Max. 2,400 N
Speed: 7-18 mm/s
Stroke length: 300-600 mm
Installation dim.: 360-550 mm
Duty Cycle: 10%
Voltage: 24 V DC
End-stop: Current cut-off
Options:
• Reed switch
• Mounting brackets
• Safety nut
Scope of application:
• Height adjustable conveyors
• Factory automation
• Ergonomic work spaces
• Workstations
The LP3 lifting column is ideal
for applications where there is a
demand for both lifting height and
small installation dimensions. The
telescopic column is compatible
with LINAK’s control units and can
operate individually or in parallel.
Thrust: Max. 6,300 N
Speed: 5-21 mm/s
Stroke length: 195-500 mm
Installation dim.: 405-670 mm
Duty Cycle: 10%
Voltage: 24 V DC
End-stop: Current cut-off
Options:
• Different profiles
• Different end plates
• Integrated gas spring
• Mounting brackets
• Safety nut
Scope of application:
• Height adjustable conveyours
• Factory automation
• Ergonomic work spaces
• Workstations
The LP2 lifting column is the ideal
choice for height adjustment of
examination tables, work benches as
well as for industrial applications. It
can be operated with two, three, or
four columns in parallel.
LP2
Facts:
• Robust anodised aluminium
surface
• Low noise level
• Compatible with CB8, CB12,
CB14, and CB18
Facts:
• Very compact 3-stage column
• Robust anodised aluminium
surface
• Low noise level
• Compatible with CB8,
CB12, CB14, and CB18
LINEAR ACTUATOR TECHNOLOGY

10
For detailed information - please use data sheets
Specifications subject to change without prior notice.
CONTROLS
The controls are the units used when you want the
LINAK system to perform a movement. They determine
whether the control box makes the actuator move in or
out. There are more variants of LINAK®controls such as
handsets, Foot Switches, Desk Panels, and Attendant
Control Panels. All the handsets are available in both
black and grey.
HB40
Facts:
• Operation of up to four actuators
• Compatible with CB8, CB9, CB12,
CB14, and CB18
• Ergonomic, compact design
• Robust (sturdy) plastic housing
• Protection class up to IP 66
HB50
Facts:
• Operation of up to four actuators
• Compatible with CB8, CB9, CB18
• Ergonomic, compact design
• Robust (sturdy) plastic housing
• Operation of the memory
functions of the actuators
• Protection class up to IP 66
FS
Facts:
• Operation of one or two actuators/
channels
• Compatible with CB8, CB9, CB12,
CB14, or CB18
• Modular system
• Protection class up to IP 66
DP
Facts:
• Operation of the memory
functions of the actuators
• Operation of up to three
actuators/channels
• Compatible with all LINAK®
control boxes
• Mounting under tabletops
• Protection class IP 30