Linak LA12 Instruction manual

Actuator LA12
Absolute positioning mechanical potentiometer
Connection diagram
LINAK.COM/TECHLINE

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2019.04 . MA-M9-02-579-A .LINAK A/S reserves the right to make technical alterations
Connection diagram
5
2019 © LINAK A/S
Absolute positioning - Mechanical potentiometer feedback
12XPXX-XXXXXXX0
YELLOW
RED
BLUE
GREEN
BLACK
+
-
Please be aware that if the power supply is not properly connected, you might damage
the actuator!

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2019.04 . MA-M9-02-579-A .LINAK A/S reserves the right to make technical alterations
I/O Specifications
5
2019 © LINAK A/S
Absolute positioning - Mechanical potentiometer feedback
Input/Output Specification Comments
Description The actuator can be equipped with a
mechanical potentiometer that gives
an analogue feedback signal when the
actuator moves
RED 12 or 24VDC (+/-)
12V ± 20%
24V ± 10%
Under normal conditions:
12V, max. 5A depending on load
24V, max. 2.5A depending on load
To extend actuator:
Connect Red to positive
To retract actuator:
Connect Red to negative
Blue To extend actuator:
Connect Blue to negative
To retract actuator:
Connect Blue to positive
Green Signal power supply (+) 12-24VDC +10V or other value
Black Signal power supply GND (-)
Yellow Potentiometer feedback
Slide potentiometer, 10 kohm
1 kohm = 0 mm stroke
11 kohm = 100 mm stroke
The maximum effect: 0.1W
Linearity: ± 20%
Minimum lifetime: 15,000
cycles
Average lifetime: 40,000
cycles
Max. current output: 1mA
Violet Not to be connected
White Not to be connected
Brown Not to be connected

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2019.04 . MA-M9-02-579-A .LINAK A/S reserves the right to make technical alterations
Terms of use
The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing
accurate and up-to-date information on its products.
However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and
changes without prior notice.Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability
of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed
in its catalogues or other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.