Lindy 51535 User manual
ExpressCard / 34
1 Port Parallel
User Manual English
LINDY No. 51535
www.lindy.com
System Requirements
Hardware:
Description
Fully compliant with Express Base Specification
Compatible for PCI Express Card application requirements.
PCI-E Multi Function Peripheral Controller with x1Lane Interface.
Support four PCI-E functions.
Parallel:
Port IEEE1284-compliant.
Package Contents
This Express I/O Card package includes the following:
-Hardware installation guide -Software installation guide
-Express Card -Driver CD
Please make sure that all of these items are present. If anything is missing,
contact your vendor for assistance.
The Super PCI Express I/O Card
Installing the Software Drivers
This section provides information on how to install the Super PCI-E I/O drivers for
the following operating systems:
Windows 2000 Driver installation
1. At the Add New Hardware Wizard windows, click on “Next”
2. Select the option “Install from a list or specific location (Advanced)” and
click on “Next”
3. Select the option “Search for the best driver in these locations.” and click on
“Next”
4. Click “Next” and then “Finish” respectively.
5. Remove the diskette, then select “Yes” to restart the computer for the setup to
take effect.
To verify successful installation in Windows2000:
1. From the main desktop, click on My Computer, then double-click on Control
Panel, System, and Device Manager.
1. Double-click on either Ports (COM & LPT) or Serial port device
options. PCI I/O Board should be displayed when successfully installed.
The port is ready to connect new device.
Windows XP Driver installation :
1. At the Add New Hardware Wizard windows, click on “Next”
2. Select the option “Install from a list or specific location (Advanced)” and
click on “Next”
3. Select the option “Search for the best driver in these locations.” and click on
“Next”
4. Click “Next” and then “Finish” respectively..
5. Remove the diskette, then select “Yes” to restart the computer for the setup to
take effect.
To verify successful installation in WindowsXP:
1. From the main desktop, click on My Computer, then double-click on Control
Panel, System, and Device Manager.
2.Double-click on either Ports (COM & LPT) or Serial port device options. PCI
I/O Board should be displayed when successfully installed. The port is ready
to connect new device.
Windows VISTA Driver installation:
1. Start power to RUN VISTA
2.
CD drive to CD-ROM
3.
Click on “Locate and install driver software (recommended)”.
4. Install the disc that came with your PCI Serial Port and then ”Next”
5.
Windows encountered a problem installing the driver software for your device
and then ”close” ( Disk D: \UART(CD-ROM)
6.
Install the disc that came with your 16C95x Serial Port and then “Next”
7.
Windows encountered a problem installing the driver software for your device
and then ”close”
8. Chick the “Device Manager” click on “Device Manager” to either Ports (COM
& LPT) device options. 16C95x Serial Port should be displayed when
successfully installed. The port is ready to connect new device.
Certifications
FCC Certifications
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received; including interference that may cause undesired operation.
CE Certification
This equipment complies with the requirements relating to electromagnetic compatibility, EN
55024 and EN55022 class A for ITE, EN61000-3-2/-3 the essential protection requirement of
Council Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling
of all waste electrical and electronic equipment. It is no longer allowable to simply throw
away electrical and electronic equipment. Instead, these products must enter the recycling
process.
Each individual EU member state has implemented the WEEE regulations into national law
in slightly different ways. Please follow your national law when you want to dispose of any
electrical or electronic products. More details can be obtained from your national WEEE
recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die
Verschrottung und das Recycling von Elektro- und Elektronikprodukten geschaffen. Diese
wurden von der Bundesregierung im Elektro- und Elektronikgerätegesetz – ElektroG in
deutsches Recht umgesetzt. Dieses Gesetz verbietet vom 24.März 2006 an das Entsorgen
von entsprechenden, auch alten, Elektro- und Elektronikgeräten über die Hausmülltonne!
Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen Sammelstellen
zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den
weiteren Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (WEEE) pour le
recyclage de tout équipement électrique et électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle
réglementation WEEE de manières légèrement différentes. Veuillez suivre le décret
d’application correspondant à l’élimination des déchets électriques ou électroniques de votre
pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo
di apparecchi elettrici ed elettronici. Non è più consentito semplicemente gettare queste
apparecchiature, devono essere riciclate. Ogni stato membro dell’ EU ha tramutato le
direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del proprio Stato
quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
LINDY No. 51535
www.lindy.com
Other Lindy Computer Hardware manuals
