Lindy 70531 User manual

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (June 2006)
Multiple Internal SATA
to eSATA Low Profile PCI
User Manual English
LINDY No. 70531
www.LINDY.com

- 2 -
1. Introduction
Ideal Low Profile PCI Converter for Mother board Internal SATA
Multiple Ports to External eSATA or Multilane 4x connection
Install this PCI board inside of your computer and make your Motherboard internal
onboard SATA ports have 2Port eSATA or Multilane 4X External Serial ATA connection
to external SATA Device.
Supports Low Profile PCI Form Factor.
1.1.Features
o Supports High Speed Transfer Rate of SATA II 3Gbps and SATA
1.5Gbps
o For eSATA Dual Ports ------ Has eSATA shielding and durable connectors for
External connection
o For Multilane 4 Ports ------ Has Type 4x Multilane SATA connector ( Cross-Over
Pinouts ) with thumbscrews for External connection
o Low Profile PCI Form Factor
o Includes 2 Brackets (Low profile PCI and Regular size PCI
Brackets)
o Two or Four LED Pin Headers for device accessing
2. Installation
Step 1. Screw the PCI Bridge board to the available slot
Step 2. Connect SATA data connectors (P2 & P4 or P1 ~ P4) to SATA Hard drives

- 3 -
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including inter
ference that may cause
undesired operations.