Listen LA-381 Reference guide

••••••••
Intelligent 12-Unit Charging Tray/Carrying Case
Quick Reference Card
This quick reference card is intended to provide
setup and dispensing instructions for:
•LA-381 Intelligent 12-Unit Charging Tray
•LA-380 Intelligent 12-Unit Charging/Carrying Case
For additional assistance, please refer to the User Manual.
SETUP INSTRUCTIONS
Setup & Dispensing
Charging Tray Charging/Carrying Case
c
Dispensing Instructions on reverse side
••••••••
••••••••
••••••••
Charging Case
••••••••
Attach lanyard organizer arm
Connect the power supply
Charging status is indicated by a ashing LED (See check-in step 5)
Connect the power cord to the charging
unit and connect to power source
1 b
34
1 c
Organizer facing inward OR Organizer facing outward
1
Organizer can optionally be
mounted to a at surface such
as a counter top or table
2
Charging Tray
Mounting kit
1 a
Attach lanyard organizer base (optional) to charging tray
Please note - while charging, the case must remain open

Check-out Units Check-in Units
Momentarily
press POWER
to get the unit
ID number
Check-in the
unit using the
Listen Log Book,
software*, or
return the
guest’s ID
Use Listen
Disinfecting
Wipes to clean
the earphone
and unit
Place the
unit in a
charging slot
Unit turns off
automatically
and begins
charging
© 2014 Listen Technologies Corporation® All Rights Reserved 20140518
For further details regarding use, adjustment, or programming of your Listen Technologies products visit our
website at www.listentech.com/support-manuals or contact Listen Technologies at +1.801.233.8992 or 1.800.330.0891.
DISPENSING INSTRUCTIONS
••••••••••••• ••••••••• •••••
•••••••• •••••• •••••••
1
3
2
4
1
3
2
4
5
Remove a
unit from the
charging slot
Unit
automatically
turns on and
ID # is displayed
Conrm that
the battery
is charged
Place the
guest’s ID in
the receiver
slot of the
charging tray
*Download software at
www.listentech.com/downloads
••••••••
LED status: ashing- charging,
solid- fully charged