Listen LA-381 User manual

••••••••
Intelligent 12-Unit Charging Tray/Carrying Case
Quick Reference Guide
This quick reference card is intended to provide
setup and dispensing instructions for:
• LA-381 Intelligent 12-Unit Charging Tray
• LA-380 Intelligent 12-Unit Charging/Carrying Case
For additional assistance, please refer to the User
Manual.
Setup Instructions
Setup & Dispensing
Charging Tray Charging/Carrying Case
Dispensing Instructions on reverse side
••••••••
••••••••
••••••••
Charging Case
••••••••
Attach cable management arm
Connect the power supply
Charging status is indicated by a ashing LED (See check-in step 5)
Connect the power cord to the charging
unit and connect to power source
1b
34
1c
Arm facing inward OR Arm facing outward
1
Arm can optionally be mounted
to a at surface such as a
counter top or table
2
Charging Tray
Mounting kit
1a
Attach cable management base to charging tray
While charging, the case must remain open
LA-382 Intelligent cable management unit sold separately

© 2020 Listen Technologies Corporation®All Rights Reserved 20200902
Dispensing Instructions
•••••••••
••••••
1
3
2
4
1
3
2
4
5
Software can also be used to manage inventory
*Download software at www.listentech.com/support/software
LED status: ashing- charging, solid- fully
charged
Remove a
unit from the
charging slot
Unit automat-
ically turns
on and ID # is
displayed
Conrm that
the battery is
charged
Place the
guest’s ID in the
receiver slot of
the tray
Check-in Units
Momentarily
press POWER to
display the unit
ID number
Check-in the
unit using
the log book,
software*,
or return the
guest’s ID
Use disinfecting
wipes to clean
the earphone
and unit
Place the unit
in a charging
slot
Unit turns o
automatically
and begins
charging
Check-out Units
For further details regarding use or
programming of your Listen
Technologies products visit our website at
www.listentech.com/support-manuals
or contact Listen Technologies at
+1.801.233.8992 or 1.800.330.0891
••••••••• •••••••••
•••••• ••••••••• •••••••••