LIVARNO home 378350 2110 Original instructions

LED SOLAR SPOTLIGHT
IAN 378350_2110 SI CZ
DE AT CH
LED-SOLARSTRAHLER
Bedienungs- und Sicherheitshinweise
CZ
SOLÁRNÍ LED REFLEKTOR
Provozní a bezpečnostní pokyny
GB
LED SOLAR SPOTLIGHT
Operating and safety information
SI
SOLARNI LED-REFLEKTOR
Navodila za uporabo in varnostni napotki

GB
Before you start reading, please fold out the illustrations page and familiarise yourself with all of
the item’s functions.
SI
Pred branjem odprite stran s slikami in se seznanite z vsemi funkcijami izdelka.
CZ
Před čtením stránku s obrázky rozevřete a poté se seznamte se všemi funkcemi výrobku.
DE AT CH
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich
anschließend mit allen Funktionen des Artikels vertraut.
GB Operating and safety information page 6
SI Navodila za uporabo in varnostni napotki stran 14
CZ Provozní a bezpečnostní pokyny strana 23
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 30

E F
A B
C D
1
11
19
16
15
1314 12 18
10
12 13 14
3
4
9
8
9
7
5
17
2
6
20
21
22

G
H
I
23 24
24
21
25
11
25
27
26
25 26
9

5
Úvod ���������������������������������������������������� 23
Vysvětlení symbolů ��������������������������� 23
Použití ke stanovenému účelu��������� 23
Rozsah dodávky�������������������������������� 23
Popis dílů �������������������������������������������� 24
Technické parametry ������������������������ 24
Bezpečnostní pokyny������������������������ 24
Riziko vytečení akumulátorů����������� 25
Montហ������������������������������������������������ 25
Nabití akumulátoru��������������������������� 27
Výměna akumulátoru����������������������� 27
Nasměrování solárního panelu������� 27
Uvedení solárního LED reektoru do
provozu����������������������������������������������� 27
Odstraňování závad ������������������������� 28
Čištění a skladování �������������������������� 28
Likvidace��������������������������������������������� 28
Záruka������������������������������������������������� 29
Servis��������������������������������������������������� 30
GB SI
CZ
Introduction ������������������������������������������ 6
Explanation of symbols���������������������� 6
Intended use����������������������������������������� 6
Specications supplied������������������������ 7
Description of parts����������������������������� 7
Technical data �������������������������������������� 7
Safety information ������������������������������ 7
Risk of leakage from rechargeable
batteries������������������������������������������������ 8
Assembly and installation������������������ 8
Charging the battery ������������������������ 10
Exchanging the battery�������������������� 10
Positioning the solar panel �������������� 10
Operating the LED solar spotlight��� 11
Troubleshooting��������������������������������� 11
Cleaning and storage������������������������ 12
Disposal����������������������������������������������� 12
Warranty �������������������������������������������� 12
Service������������������������������������������������� 13
Einleitung �������������������������������������������� 30
Zeichenerklärung ������������������������������ 30
Bestimmungsgemäße
Verwendung��������������������������������������� 31
Lieferumfang �������������������������������������� 31
Teilebeschreibung������������������������������ 31
Technische Daten ������������������������������� 32
Sicherheitshinweise ��������������������������� 32
Risiko des Auslaufens von Akkus ��� 33
Montage���������������������������������������������� 33
Akku auf laden����������������������������������� 35
Akku austauschen����������������������������� 35
Solarpanel ausrichten ����������������������� 35
LED-Solarstrahler in Betrieb
nehmen ����������������������������������������������� 35
Fehlerbehebung��������������������������������� 36
Reinigung und Lagerung ������������������ 36
Entsorgung������������������������������������������ 37
Garantie���������������������������������������������� 37
Service������������������������������������������������� 38
Uvod ���������������������������������������������������� 14
Razlaga znakov��������������������������������� 14
Namenska uporaba�������������������������� 14
Obseg dobave ����������������������������������� 14
Opis sestavnih delov������������������������� 15
Tehnični podatki��������������������������������� 15
Varnostni napotki������������������������������ 15
Nevarnost puščanja akumulatorskih
bater�������������������������������������������������� 16
Montaža���������������������������������������������� 16
Polnjenje batere������������������������������� 18
Zamenjava bater����������������������������� 18
Usmeritev solarnega panela ����������� 18
Zagon LED solarnega reektorja���� 18
Odstranjevanje napak���������������������� 19
Čiščenje in shranjevanje�������������������� 19
Odstranjevanje med odpadke��������� 20
Garanca �������������������������������������������� 20
Servisna služba���������������������������������� 21
DE AT CH

6GB
LED Solar Spotlight
zIntroduction
Congratulations on the purchase of
your new product� You have chosen
a high-quality product� Please read
these operating instructions thoroughly and
carefully� These instructions are an essential
part of the product and contain important
information on rst-time use and handling.
Always observe all safety instructions� If you
have any questions or are unsure how to
operate the product, please contact your
retailer or service centre� Please keep this
manual in a safe place and pass it on to
third parties where necessary�
zExplanation of symbols
Read the operating instructions!
Issue date of instruction manual
(month/year)
Date of manufacture
(month/year)
Direct current
Risk of fatal injury and
accidents for infants and
children!
Observe warning notices and
safety instructions!
Explosion hazard!
Wear protective gloves!
b
a
Dispose of packaging and
product in an environmentally
friendly manner!
Risk of environmental damage
from incorrect disposal of
batteries/rechargeable
batteries!
This symbol indicates that the
product operates with safety
extra-low voltage (SELV/PELV,
protection class III)�
Not suitable for indoor lighting
Detection range
Motion sensor
Luminous power
Integrated Li-ion battery
Protected against solid foreign
objects with a diameter of
≥ 1.0 mm, splash-proof
A cracked protective cover
must always be replaced�
Discontinue use of the product
immediately if damaged in any
way, and contact the service
address�
Packaging made of
FSCcertied
wood mix
With the CE label, the
manufacturer conrms that this
product complies with the
applicable European directives�
zIntended use
The LED solar spotlight is intended for
automatic illumination in outdoor areas (e�g�
garden, patio, etc�)� The spotlight must not
be installed indoors, as the battery cannot
be charged inside� The spotlight is not
suitable for room lighting in the household�
The spotlight is intended for use in private
households only�

7
GB
zSpecications supplied
1 LED solar spotlight
1 wall bracket for solar panel
1 wall bracket for spotlight (for mounting on
building walls and corners)
1 ground spike
1 extension cable (separate)
1 xing materials
(6 wall plugs and 6 screws)
1 instruction manual
zDescription of parts
1Solar panel
2Connecting sleeve
3Bracket (solar panel)
4Bracket (solar panel/spotlight)
5Guide bar
6Power cord with plug (permanently
attached)
7Fixing bolts (reectors)
8Lamp head
9Motion sensor
10
Guide holes
11
LED solar spotlight
12
LUX control (for setting sensitivity to
ambient light)
13
TIME control (for setting how long the
spotlight stays on)
14
SENS control (for adjusting the
detection distance of the motion sensor)
15
Charging socket (with rubber cover)
16
ON/OFF/AUTO switch
17
Ground spike
18
Extension cable with plug (loose)
19
Wall bracket (solar panel)
20
Wall bracket mounting holes (solar
panel)
21
Wall bracket (spotlight)
22
Wall bracket mounting holes (spotlight)
23
Wall plugs
24
Screw
25
Screws (housing/batteries)
26
Battery compartment
27
Rechargeable batteries
zTechnical data
Model number: 898-S-2/898-W-2
Solar panel: 6 V , max� 3 W
Li-ion battery: 3,7 V ,
4000 mAh (18650)
Motion sensor:
Detection range:
1 - 8 m
Field of view:
approx� 100°
Protection class: IP44
Recommended
installation height: 2 - 4 m
Maximum
projection area: 2x 78 cm2
Weight: 900 g
Dimensions: 20 x 26,5 x 20,5 cm
zSafety information
Safety information
WARNING!
RISK OF FATAL INJURY AND
ACCIDENTS FOR INFANTS AND
CHILDREN!
Never leave children
unsupervised with the packaging material�
There is a danger of suffocation from the
packaging material� Children often
underestimate the dangers� Always keep
children away from the product�
This product can be used by children aged
8 years and over, as well as by persons
with limited physical, sensory or mental
abilities or lacking in experience and

8GB
knowledge if they have been supervised
and instructed as to the safe use of the
product and understand the resulting
hazards� Do not let children play with the
product� Cleaning and maintenance may
not be carried out by children without
proper supervision�
Do not use the product if you notice any
damage�
The light source may only be replaced by
the manufacturer, service technician or a
similarly qualied person.

RISK OF FATAL INJURY! Keep children
away from the work area during assembly�
The product as supplied includes a number
of screws and other small parts� These can
be fatal if they are swallowed or inhaled�

RISK OF INJURY! Make sure you remove
the ground spike when removing the spot
light to avoid any risk of injury (e�g� trip
hazard)�

TRIP HAZARD! Please make sure that the
power cable is routed in such a way that
nobody can tread on it or trip over it�
Safety instructions for
rechargeable batteries
 RISK OF DEATH! Keep rechargeable
batteries out of the reach of children� If
swallowed, seek medical advice
immediately!

EXPLOSION HAZARD! Never
recharge non-rechargeable
batteries� Do not short-circuit and/
or open up batteries/rechargeable
batteries. They could overheat, cause a re
or explode�
Never throw rechargeable batteries into re
or water�
Do not expose the rechargeable batteries to
mechanical stress�
Remove the batteries from the battery
compartment as soon as they are empty or
if you are not going to use the product for a
longer period of time�
Never combine different types of
rechargeable batteries or batteries with
different charge statuses�
zRisk of leakage from
rechargeable batteries
Avoid exposing rechargeable batteries to
extreme conditions and temperatures, e�g�
radiators or direct sunlight�
Avoid contact with skin, eyes and mucous
membranes! In the event of skin contact
with battery acid, rinse the affected area
immediately with plenty of clean water and
seek medical advice immediately!

WEAR PROTECTIVE GLOVES!
Leaking or damaged rechargeable
batteries can cause chemical burns
if they come into contact with skin�
Therefore, wear suitable protective gloves in
such cases�
In the event that of battery leaks, remove
battery from the product immediately to
avoid damage��
zAssembly and installation
Please note: dispose of all packaging
material�
Decide prior to installation where the
product is to be mounted�
Before drilling the xing holes, satisfy
yourself that there is no danger of drilling
into or damaging gas or water pipes or
electricity cables in the position where you
are about to drill the holes�
Use a drill to drill the holes into the
masonry� Observe all safety instructions
provided in the operation and safety
manual for your drill� Otherwise there is a
risk of death or injury from electric shock�
When deciding where to mount the
light, pay attention to the following:
Ensure the product illuminates the desired
area� Make sure that the motion sensor 9

9
GB
(see Fig� B) covers the desired area�
The motion sensor has a maximum
detection range of 8 m with a eld of view
of approx� 100°�
Ensure that the motion sensor 9is not in a
position where street lighting will shine on it
at night� This may impair the function�
The recommended installation height is 2 to
4 m�
Use the xing holes
22
in the spotlight wall
bracket
21
(for mounting on building walls
or corners) to mark the positions for drilling
the holes (see Fig� G)�
Drill the holes (ø 5�5 mm, about 30 mm
deep)�
Now insert the wall plugs
23
into the
drilled holes (see Fig� G)�
Offer the wall bracket
21
up to the
mounting surface and x it in place with
the screws
24
without fully tightening them�
Tighten the screws in the xing holes and
align the LED solar spotlight
11
as
required�
The LED solar spotlight
11
can now simply
be slotted onto the wall bracket (see Fig�
H)�
Aligning the LED Solar Spotlight
The lamp heads 8(see Fig� B) can be
individually adjusted both vertically and
horizontally at an angle of about 65°� To do
so, remove the xing bolt 7(see Fig� B) and
then align the lamp heads as desired�
Now align the motion sensor 9, ensuring
that it faces directly towards the desired
detection zone�
Please note: the motion sensor has a eld
of view of up to 100°�
Mounting the solar panel
You have the option of mounting the solar
panel 1(see Fig� A) directly on the
spotlight, on a at surface (wall/roof), or on
the lawn, for example, using the ground
spike
17
(see Fig� D) supplied with the
product�
Please note: the solar panel 1should be
positioned where it will be exposed to as
much direct sunlight as possible� Even partial
shade during the day can signicantly
impair the charging process�
Orientation:
The optimum alignment is facing south� It is
better to face the solar panel slightly to the
west than slightly to the east�
Mounting the solar panel on the
spotlight
Screw the screw xing 3together with the
connecting sleeve 2(see Fig� A) and
tighten it hand-tight�
Now x the solar panel/spotlight bracket
4in the guide holes
10
in the LED solar
spotlight by pushing the guide rail 5of
the bracket into the guide holes of the LED
solar spotlight until they lock into place�
Slot the solar panel 1onto the solar
panel/spotlight bracket 4�
Please note: to detach the bracket again,
very carefully press the tabs on the sides of
the guide rail 5until the bracket can be
removed�
Now plug the power cable 6into the
charging socket
15
(see Fig� C); to do so
you must rst remove the rubber cap.
Please note: the cap cannot be screwed on
in this position and hangs loosely on the
cable� This has no effect on the functioning
of the product�
Mounting the solar panel on a wall/
roof
Screw the solar panel screw xing 3onto
the solar panel/spotlight bracket 4using
the connecting sleeve 2and tighten it
hand-tight�
Use the xing holes
20
in the solar panel
wall bracket
19
to mark the positions for
drilling the holes (see Fig� F)�
Drill the holes (ø 5�5 mm, about 30 mm
deep)�
Now insert the wall plugs
23
into the xing

10 GB
holes
20
�
Offer the wall bracket
19
up to the
mounting surface and x it in place with
the screws
23
�
Now push the solar panel/spotlight bracket
4onto the solar panel wall bracket 19
until it very lightly snaps into place�
Now connect the plug of cable 6to the
socket of the extension cable
18
(see Fig�
D) and then connect the plug of cable
18
to the charging socket
15
of the LED solar
spotlight�
Now align the LED solar spotlight as
desired�
Please note: to detach the bracket again,
very carefully press the tabs on the sides of
the guide rail 5until the bracket can be
removed�
Mounting the solar panel on the ground
spike
Screw the solar panel screw xing 3onto
the connecting sleeve 2and tighten it
hand-tight�
Now join the LED solar spotlight
11
together with the ground spike
17
(see Fig�
D) using the connecting sleeve 2and
push the spike into the ground (lawn, soil,
etc�) where desired�
Please note: make sure the solar panel is
attached rmly!
Now connect the plug of cable 6to the
socket of the extension cable
18
(see Fig�
D) and then connect the plug of cable
18
to the charging socket
15
of the LED solar
spotlight�
The spotlight and solar panel are now ready
for use�
RISK OF INJURY! Make sure you remove
the ground spike when removing the
spotlight to avoid any risk of injury (e�g� trip
hazard)�
zCharging the battery
The battery is charged regardless of the
position of the switch� To optimise initial
charging, charge the LED solar spotlight
while it is turned off�
Please note: the battery is fully charged after
it has been well exposed to sunlight for 6 to 8
hours� The duration of the charging process
depends on the battery‘s charge level and the
quality of the sunlight�
zExchanging the battery
Loosen the screws
25
on the underside of
the product� Fold the motion detector 9
upwards so that you can reach two of the
ve screws (see Fig. I).
Carefully take the product apart� Take care
not to tug on the cables�
Loosen the screws
25
on the underside of
the battery compartment
26
and remove
the battery compartment (see Fig� I)�
Remove the exhausted rechargeable
batteries
27
and dispose of it in
accordance with applicable guidelines�
Insert new rechargeable batteries� Only use
batteries of the same type (see section
‘Technical specications’). Pay attention to
the correct polarity when inserting batteries�
Screw the battery compartment back in
place�
Put the product together again� Attention:
Make sure not to get any cables trapped
between the different parts�
Refasten the ve screws.
zPositioning the solar panel
Orientation
The optimum alignment is facing south� It is
better to face the solar panel slightly to the
west than slightly to the east�
Please note: to ensure the solar panel
functions as effectively as possible, make
sure that the surface of the solar panel 1is

11
GB
not dirty�
Now align the solar panel 1 and x it in
position using the screw xing 3�
zOperating the LED solar
spotlight
Please note: Only operate the oodlight
with the solar panel supplied� Do not
connect the oodlight or the solar panel to
any external devices�
When you switch the ON/OFF/AUTO
switch
16
(see Fig� C) to “ON” (II) the
spotlight remains permanently on�
When you switch the ON/OFF/AUTO
switch
16
to “OFF” (0) the spotlight
remains permanently off�
When you switch the ON/OFF/AUTO
switch
16
to “AUTO” (I) the spotlight is set
to AUTOMATIC mode� In this switch
position, the spotlight will switch on/off
according to control settings (for
illumination time, ambient light response
and detection range)�
When the spotlight is turned off after the
specied burn time, it will continue to burn
with reduced brightness� This setting is only
activated when in “AUTO” mode, and is
deactivated if the switch is in the “ON”
position�
Please note: battery charging via the solar
panel does not depend on the position of
the ON/OFF/AUTO switch
16
� The battery
is charged continuously at all times�
Information about functionality: in
twilight or darkness, the solar cell will turn
on the product as soon as the motion sensor
detects movement�
Adjusting the illumination time
Turn the TIME adjuster control
13
(see Fig� E)
clockwise to set the spotlight ON time to the
maximum duration of 60 seconds� Turn the
TIME adjuster control
13
anticlockwise to set
the spotlight ON time to the minimum
duration of 10 seconds�
Adjusting ambient light response
The LUX adjuster control
12
(see Fig� E) can
be used to adjust the “response” (i�e�
sensitivity) of the twilight sensor to the
ambient light level� Turn the adjuster control
clockwise to have the spotlight switch on at
ambient light levels up to as high as 50,000
lux� Turn the LUX adjuster control
12
anticlockwise to have the spotlight switch on
at ambient light levels from as low as 5 lux�
Adjusting detection range
Turn the SENS adjuster control
14
(see Fig�
E) clockwise to increase the motion sensor
detection range up to a maximum of 8
metres� The motion sensor will then activate
the spotlight when motion is detected within
a range of 8 metres� Turn the SENS adjuster
control
14
anti-clockwise to reduce the
motion sensor detection range to a minimum
of 1 metre� The motion sensor 9will then
not activate the spotlight until motion is
detected within 1 metre�
zTroubleshooting
= Fault
=Cause
= Solution
= The LED solar spotlight does not turn
on�
= The LED solar spotlight is turned off�
= Press the ON/OFF/AUTO switch
(I/0/II) to switch the LED solar
spotlight on�
= The light is ickering.
= The battery is almost fully discharged�
= Charge the battery (see section
“Charging the battery”)�

12 GB
zCleaning and storage
Switch the spotlight
11
off if you want to
stop using it, store it away or clean it�
Regularly inspect the motion sensor 9and
the solar panel 1to make sure they are
not dirty� Remove any dirt to ensure the
spotlight works correctly�
Keep the spotlight and especially the solar
panel free of snow and ice in winter�
Clean the spotlight with a lint-free, damp
cloth and a mild detergent�
zDisposal
Note the labels on the packaging
materials when sorting the waste;
they are marked with abbreviations
(a) and numbers (b) with the
following meanings:
1-7: Plastics
20-22: Paper and cardboard
80-98: Composite materials
You can nd out how to dispose of
the used product by contacting your
local district or city council�
In the interest of environmental
protection, when the product has
reached the end of its useful life, do
not dispose of it as general
household waste but have it
properly recycled� For information
on recycling centres and their
opening times, please contact your
local council�
Faulty or used batteries must be recycled in
accordance with Directive 2006/66/EC
and its amendments� Return batteries and/or
the product to the local recycling facilities
provided�
Risk of environmental damage
from incorrect disposal of
rechargeable batteries!
Batteries must not be disposed of as general
household waste� They may contain toxic
heavy metals* and are subject to special
waste treatment� Batteries and rechargeable
batteries that are not permanently xed
inside the product must be removed before
disposal of the product and disposed of
separately� Please ensure batteries/
rechargeable batteries are fully discharged
when disposed of! Wherever possible, use
rechargeable batteries rather than single-use
batteries�
*) Marked as followed: Cd = cadmium,
Hg = mercury, Pb = lead
zWarranty
Dear customer, This product comes with a
3-year warranty from the date of purchase�
In the event that this product is faulty, you
have legal rights against the seller of the
product� These statutory rights are not
restricted by our warranty as set out below�
Warranty terms
The warranty period begins with the date of
purchase� Please keep the original receipt in
a safe place� It is required as proof of
purchase� If a material or manufacturing
defect occurs within three years of the date
of purchase, we will repair or replace the
product for you free of charge, or refund the
purchase price, at our discretion� This
warranty service is granted provided that the
faulty device and the proof of purchase
(receipt) are presented within three years,
along with a brief written description of the
fault and of when it occurred� If the fault is
covered by our warranty, we will return the
xed product or send you a new one. No
new warranty period shall begin upon repair
or replacement of the product�
Warranty period and statutory
warranty claims
The warranty period is not renewed after a
warranty service has been granted� This rule
shall also apply for any replaced or repaired

13
GB
parts� Any damage or faults that already
existed when buying the product must be
reported immediately upon unpacking the
product� A fee is charged for any repairs
that are carried out after the end of the
warranty period�
Warranty scope
The device was carefully manufactured
according to the strictest quality guidelines
and thoroughly tested before delivery� The
warranty applies to material or
manufacturing defects� This warranty does
not apply to product parts that are subject to
normal wear and tear and can therefore be
regarded as wearing parts, or damage to
fragile parts, such as switches, rechargeable
batteries or parts that are made of glass�
This warranty is void if the product has been
damaged, improperly used or serviced� To
ensure proper use, all instructions included in
the manual must be followed carefully� All
uses and actions that users are discouraged
from or warned of in the manual must be
avoided under all circumstances� The product
is intended for private household use only,
and not for commercial activities� The
warranty is void, if the product is treated
inappropriately, if force is applied, and in
the case of any manipulation that is not
carried out by our authorised service branch�
Warranty processing
To ensure your request is handled swiftly,
please observe the following
Notes:
Please have the receipt and the article
number (e�g� IAN 123456) ready as proof
of purchase for all enquiries�
Please refer to the type plate on the
product, an engraving on the product, the
cover of the manual (bottom left) or the
sticker on the back or base of the product
to nd out the product number.
In the case of any malfunctions or other
defects, please call or email the service
department indicated below as a rst step.
After your product has been registered as
faulty, you can send it to the specied
service address, free of charge� Please
include the proof of purchase (receipt) and
information about the defect and about
when it occurred�
zService
GB
Service Great Britain
Tel�: 00800 80040044
E-Mail: administration@mynetsend�de
IAN 378350_2110
Please have the receipt and the article
number (e�g� IAN 123456) ready as proof
of purchase for all enquiries�
You can nd an up-to-date version of the
operating instructions at:
www�citygate24�de

14 SI
LED solarni reektor
zUvod
Čestitamo vam ob nakupu vašega
novega izdelka. Odločili ste se za
izdelek visoke kakovosti� Prosimo,
da si ta navodila za uporabo preberete v
celoti in natančno. Ta navodila so del tega
izdelka in vsebujejo pomembna navodila za
zagon in rokovanje. Vedno upoštevajte vsa
varnostna navodila. Z morebitnimi vprašanji
ali dvomi glede ravnanja z izdelkom se
obrnite na svojega prodajalca ali servisni
center� Prosimo, da ta navodila skrbno
shranite in jih po potrebi posredujete tretjim
osebam�
zRazlaga znakov
Preberite navodila za uporabo!
Datum izdaje navodil za
uporabo (mesec/leto)
Datum izdelave (mesec/leto)
Enosmerna napetost
Smrtna nevarnost in nevarnost
nesreč za malčke in otroke!
Upoštevajte opozorilne in
varnostne napotke!
Nevarnost eksplozije!
Nosite zaščitne rokavice!
b
a
Embalažo in izdelek odlagajte
med odpadke na okolju
prijazen način!
Okoljska škoda zaradi
nepravilnega odlaganja
baterij/akumulatorjev!
Ta simbol označuje, da izdelek
deluje z varnostno nizko
napetostjo (SELV/PELV) (razred
zaščite III).
Ni primerno za razsvetljavo
prostorov
Območje zaznavanja
Kot zaznavanja detektorja
Svetlobni tok
Integriran litij-ionski akumulator
Zaščitena proti trdnim tujkom
premera ≥1,0 mm in odporen
proti brizganju vode�
Vsak razpočen zaščitni pokrov
je treba zamenjati� Izdelek v
primeru okvare takoj
prenehajte uporabljati in se
obrnite na navedeni servisni
naslov�
Embalaža iz mešanega lesa s
certikatom FSC
Z oznako CE proizvajalec
potrjuje, da je ta izdelek v
skladu z veljavnimi evropskimi
smernicami�
zNamenska uporaba
LED solarni reektor je namenjen za
samodejno zunanjo razsvetljavo (npr� vrta,
terase itd.). Reektorja se ne sme namestiti v
notranjih prostorih, saj v tem primeru ni
mogoče polniti baterij. Reektor ni primeren
za razsvetljavo prostorov v gospodinjstvu�
Reektor je namenjen samo za zasebno
uporabo�
zObseg dobave
1 × LED solarni reektor
1 × solarni panel
1 × stensko držalo za solarni panel
1 × stensko držalo za reektor
(za hišne stene in vogale)
1 × ozemljitvena konica

15
SI
1 × podaljševalni kabel (ohlapen)
1 × montažni material
(6× moznik in 6× vijak)
1 × navodila za uporabo
zOpis sestavnih delov
1Solarni panel
2Povezovalna objemka
3Vijačni spoj (solarni panel)
4Držalo (solarni panel/reektor)
5Vodilo
6Kabel z vtičem (ksni)
7Pritrdilni zapah (reektorji)
8Svetilne glave
9Detektor gibanja
10
Pilotne luknje
11
LED solarni reektor
12
Nastavitveni regulator LUX (nastavitev
za svetlost okolice)
13
Nastavitveni regulator TIME (nastavitev
za trajanje osvetlitve reektorja)
14
Nastavitveni regulator SENS (nastavitev
za območje zaznavanja detektorja
gibanja)
15
Vtičnica za polnjenje (z gumijastim
pokrovom)
16
Stikalo za VKLOP/IZKLOP/SAMOD�
17
Ozemljitvena konica
18
Podaljševalni kabel z vtičem (ohlapen)
19
Stensko držalo (solarni panel)
20
Pritrdilne luknje za stensko držalo
(solarni panel)
21
Stensko držalo (reektor)
22 Pritrdilne luknje za stensko držalo (reektor)
23
Moznik
24
Vijak
25
Vijaki (ohišje/baterije)
26
Držalo (baterije)
27
Baterije
zTehnični podatki
Solarni panel: 898-S-2 / 898-W-2
Sončna celica: 6 V , najv� 3 W
Li-ionska baterija: 3,7 V ,
4000 mAh (18650)
Detektor premikanja:
Območje zaznavanja:
1 – 8 m
Kot zaznavanja:
pribl� 100°
Vrsta zaščite: IP44
Priporočena višina
namestitve: 2 - 4 m
Največja površina
projekcije: 2x 78 cm2
Teža: 900 g
Dimenzije: 20 x 26,5 x 20,5 cm
zVarnostni napotki
Varnostni napotki
OPOZORILO!
ŽIVLJENJSKA NEVARNOST IN
TVEGANJE NEZGODE ZA
MALČKE IN OTROKE!
Otrok nikoli ne
puščajte brez nadzora samih z embalažnim
materialom. Obstaja nevarnost zadušitve
zaradi embalažnega materiala. Otroci
pogosto podcenjujejo nevarnosti� Otroke
vedno držite proč od izdelka.
Ta izdelek lahko uporabljajo otroci, stari 8
let in več, in osebe z zmanjšanimi
zičnimi, čutnimi ali duševnimi
sposobnostmi ali pomanjkanjem izkušenj in
znanja, če so nadzorovane ali bile
poučene o varni uporabi izdelka in
razumevajo nevarnosti, ki iz tega izhajajo�
Otroci se z izdelkom ne smejo igrati� Otroci
ne smejo opravljati čiščenja in vzdrževalnih
del brez nadzora�
Izdelka ne uporabljajte, če ugotovitve

16 SI
kakršno koli poškodbo.
Vir svetlobe te svetilke lahko zamenja samo
proizvajalec oz. njegov pooblaščeni
servisni sodelavec ali podobno
usposobljena oseba�

ŽIVLJENJSKA NEVARNOST! Med
montažo se morajo otroci nahajati izven
delovnega območja. Obseg dobave
vključuje različne vijake in druge manjše
dele. Ti so lahko smrtno nevarni, če jih
pogoltnete ali vdihnete�

NEVARNOST TELESNIH POŠKODB! Ko
odstranite reektor, odstranite tudi
ozemljitveno konico, da ne predstavlja
nevarnosti (npr� spotikanje)�

NEVARNOST SPOTIKANJA! Poskrbite,
da bo kabel napeljan tako, da ga ne bo
mogel nihče pohoditi, oziroma se obenj
spotakniti�
Varnostna navodila za
akumulatorske batere
 SMRTNO NEVARNO! Akumulatorske
baterije vedno hranite izven dosega otrok�
V primeru zaužitja takoj poiščite zdravniško
pomoč!

NEVARNOST EKSPLOZE!
Nikoli ne polnite baterij, ki jih ni
mogoče polniti. Nikoli ne
povzročajte kratkega stika akumulatorskih
baterij in jih ne odpirajte� Posledica so
lahko pregrevanje, nevarnost požara ali
eksplozija�
Akumulatorskih baterij nikoli ne mečite v
ogenj ali v vodo�
Akumulatorskih baterij ne izpostavljajte
mehanskim obremenitvam�
Akumulatorske baterije odstranite, če so
prazne ali če izdelka dlje časa ne boste
uporabljali�
Ne smete skupaj uporabljati različnih vrst
akumulatorskih baterij ali ali če nimajo
enake stopnje polnjenja�
zNevarnost puščanja
akumulatorskih bater
Izogibajte se ekstremnim pogojem in
temperaturam, ki lahko vplivajo na
akumulatorske baterije, npr� radiatorjem/
neposredni sončni svetlobi.
Izogibajte se stiku s kožo, očmi in
sluznicami! Če pridete v stik s kislino
akumulatorja, prizadeta mesta takoj izperite
z veliko čiste vode in takoj poiščite
zdravniško pomoč!

NOSITE ZAŠČITNE ROKAVICE!
Puščajoče ali poškodovane
akumulatorske baterije lahko
povzročijo opekline, če pridejo v stik s
kožo. Zato v tem primeru nosite primerne
zaščitne rokavice.
Če akumulatorske baterije puščajo, jih takoj
odstranite iz izdelka, da se izognete
poškodbam.
zMontaža
Napotek: Popolnoma odstranite embalažni
material�
Pred montažo določite, kje boste izdelek
namestili�
Pred vrtanjem pritrdilnih lukenj se
prepričajte, da na mestu vrtanja ne morete
prevrtati ali poškodovati cevi za plin,
vodovodne cevi ali električnega voda.
Za vrtanje lukenj v zid uporabite vrtalnik�
Upoštevajte varnostna navodila, ki izhajajo
iz navodil za uporabo in varnostnih navodil
vrtalnika� V nasprotnem primeru obstaja
nevarnost smrti ali poškodbe zaradi
električnega udara.
Pri izbiri mesta namestitve bodite
pozorni na naslednje:
Prepričajte se, da je izdelek osvetljuje
želeno območje. Prepričajte se, da detektor
gibanja 9 (glejte sl. B) zajema želeno
območje.
Detektor gibanja ima območje zaznavanja

17
SI
najv� 8 m, s kotom zaznavanja pribl� 100°�
Poskrbite, da detektor gibanja 9 ponoči ni
osvetljen z ulično razsvetljavo. To lahko
omejuje funkcijo�
 Priporočena višina namestitve znaša 2 do
4 m�
Označite položaj izvrtin s pomočjo
pritrdilnih lukenj
22
za stensko držalo
reektorja
21
(za hišne stene in vogale)
(glejte sl� G)�
Z vrtalnikom izvrtajte izvrtine (ø 5,5 mm,
pribl� 30 mm globoko)�
Sedaj v izvrtine vstavite moznike
23
� (glejte
sl� G)
Sedaj položite stensko držalo
21
na
montažno površino in ga rahlo pritrdite z
vijaki
24
�
Zategnite vijake v pritrdilnih luknjah in
usmerite LED solarni reektor
11
�
LED solarni reektor
11
lahko sedaj
preprosto potisnete na stensko držalo
(glejte sl� H)�
Usmeritev LED solarnega reektorja
Svetilne glave 8 (glejte sl. B) je mogoče
navpično in vodoravno posamično nastaviti
pod kotom do 65°� Za to odstranite pritrdilni
zapah 7 (glejte sl. B) in po želji usmerite
svetilne glave�
Sedaj usmerite detektor gibanja 9in
poskrbite, da je ta usmerjen neposredno na
vaše želeno območje zaznavanja.
Napotek: Detektor gibanja ima kot
zaznavanja do 100°�
Montaža solarnega panela
Solarni panel 1(glejte sl� A) lahko izbirno
namestite neposredno na reektor, na ravno
montažno površino (stena/streha) ali s
priloženo ozemljitveno konico
17
(glejte sl�
D) npr� na travo�
Napotek: Solarni panel 1 potrebuje čim
bolj neposredno sončno svetlobo. Tudi zgolj
delno senčenje solarnega panela čez dan
lahko pomembno vpliva na njegovo
napajanje�
Smer neba:
Optimalna je usmerjenost proti jugu� Raje
izberite orientacijo z rahlim odstopanjem
proti zahodu kot z rahlim odstopanjem proti
vzhodu�
Pritrditev solarnega panela na reektor
Vijačni spoj 3 ročno zategnite s
povezovalno objemko 2(glejte sl� A)�
Sedaj pritrdite držalo solarnega panela/
reektorja 4s pilotnimi luknjami
10
LED
solarnega reektorja tako, da vodilo 5
držala potiskate v pilotne luknje, dokler se
ne zaskoči.
Solarni panel 1 nataknite na držalo
solarnega panela/reektorja 4�
Napotek: Za demontažo držala čisto rahlo
pritiskajte skupaj stranske zavihke vodila 5,
dokler držalo ne popusti.
Sedaj vtič kabla 6 potisnite v vtičnico
15
(glejte sl� C), za kar morate najprej odpreti
gumijasti pokrov�
Napotek: Zapirala tukaj ni mogoče pritrditi
z vijaki, tako da ohlapno visi ob kablu� To
nikakor ne vpliva na delovanje izdelka�
Pritrditev solarnega panela na streho/
steno
Privijte vijačni spoj 3solarnega panela na
držalo solarnega panela/reektorja 4s
pomočjo povezovalne objemke 2in ga
ročno zategnite.
Označite položaj izvrtin s pomočjo
pritrdilnih lukenj
20
za stensko držalo
solarnega panela
19
(glejte sl� F)�
Z vrtalnikom izvrtajte izvrtine (ø 5,5 mm,
pribl� 30 mm globoko)�
Sedaj v pritrdilne luknje
20
vstavite
moznike
23
�
Sedaj položite stensko držalo
19
na
montažno površino in ga pritrdite z vijaki
23
�
Sedaj potiskajte držalo solarnega panela/
reektorja 4 na stensko držalo solarnega
panela
19
, dokler se to rahlo ne zaskoči.
Sedaj povežite vtič kabla 6 z vtičnico

18 SI
podaljševalnega kabla
18
(glejte sl� D),
nato pa vtič podaljševalnega kabla
18
povežite s polnilno vtičnico
15
LED-
solarnega reektorja.
Sedaj LED solarni reektor usmerite po
želji.
Napotek: Za demontažo držala čisto rahlo
pritiskajte skupaj stranske zavihke vodila 5,
dokler držalo ne popusti.
Pritrditev solarnega panela na
ozemljitveno konico
Privijte vijačni spoj 3solarnega panela na
povezovalno objemko 2 in ga ročno
zategnite�
LED solarni reektor
11
s povezovalno
objemko 2sedaj nataknite na
ozemljitveno konico
17
in jo potisnite v
vašo želeno podlago (trava/zemlja itd.).
Napotek: Poskrbite za dobro pritrditev!
Sedaj povežite vtič kabla 6 z vtičnico
podaljševalnega kabla
18
(glejte sl� D),
nato pa vtič podaljševalnega kabla
18
povežite s polnilno vtičnico
15
LED-
solarnega reektorja.
Reektor in solarni panel sta sedaj
pripravljena za uporabo�
NEVARNOST TELESNIH POŠKODB! Ko
odstranite reektor, odstranite tudi
ozemljitveno konico, da ne predstavlja
nevarnosti (npr� spotikanje)�
zPolnjenje batere
Akumulatorska baterija se polni pri vsakem
položaju stikala. Optimalno polnitev
dosežete na začetku, ko je LED solarni
reektor izklopljen.
Napotek: Akumulatorska baterija se pri dobri
sončni svetlobi napolni v 6 do 8 urah. Trajanje
postopka polnjenja je odvisno od stanja
napolnjenosti baterije in kakovosti sončnih
žarkov.
zZamenjava bater
Odvijte 5 vijakov
25
na spodnji strani
izdelka� Detektor gibanja 9 zložite
navzgor, da omogočite dostop do petih
vijakov (glejte sl� I)�
Previdno razstavite izdelek� Pazite, da ne
vlečete za napeljavo.
Odvijte vijake
25
na držalu baterije
26
in
odstranite držalo (glejte sl. I).
Odstranite izrabljene baterije
27
in jih
odstranite v skladu s predpisi�
Vstavite nove baterije� Uporabite samo
baterije istega tipa (glejte poglavje
»Tehnični podatki«). Pri vstavljanju bodite
pozorni na pravilno polarnost�
Čvrsto privijte držalo akumulatorjev.
Znova sestavite izdelek� Napotek: Pazite,
da med sestavnimi deli ne pride do
zmečkanja kabla.
Znova privijte pet vijakov�
zUsmeritev solarnega panela
Smer neba
Optimalna je usmerjenost proti jugu� Raje
izberite orientacijo z rahlim odstopanjem
proti zahodu kot z rahlim odstopanjem proti
vzhodu�
Napotek: Za zagotavljanje optimalnega
delovanja poskrbite, da površina solarnega
panela 1ni umazana�
Sedaj usmerite solarni panel 1in ga
pritrdite z vijačnim spojem 3�
zZagon LED solarnega
reektorja
Napotek: Žaromet upravljajte izključno s
priloženim solarnim panelom. Žarometa in
solarnega panela ne priključujte na zunanje
naprave�
Stikalo za VKLOP/IZKLOP/SAMOD�
16
(glejte sl. C) preklopite v položaj »ON« (II)
in reektor je tako trajno vklopljen. Pri tej

19
SI
nastavitvi je usmerjevalna luč deaktivirana.
Stikalo za VKLOP/IZKLOP/SAMOD�
16
preklopite v položaj »OFF« (0) in reektor
je tako trajno izklopljen�
Stikalo za VKLOP/IZKLOP/SAMOD�
16
(glejte sl. C) preklopite v položaj »AUTO«
(I) in reektor je v SAMODEJNEM načinu.
Pri tem položaju stikala se reektor prižge
z nastavljenimi nastavitvami (trajanje
osvetlitve, svetlost okolice, območje
zaznavanja)�
Ko se reektor po nastavljenem času
ponovno izklopi, sveti z zmanjšano
svetlostjo� Ta osvetlitev se aktivira samo pri
nastavitvi »AUTO«, pri nastavitvi »ON« pa
je deaktivirana�
Napotek: Polnitev akumulatorske baterije
preko solarnega panela ni odvisna od tega,
v katerem položaju se nahaja stikalo za
VKLOP/IZKLOP/SAMOD�
16
� Polnjenje
vedno poteka�
Napotek glede delovanja: Sončna celica
vklopi izdelek v mraku oz� temi, takoj ko
detektor gibanja zazna gibanje�
Nastavitev trajanja osvetlitve
Zavrtite nastavitveni regulator TIME
13
(glejte sl� E) v smeri urinega kazalca in
trajanje osvetlitve bo nastavljeno na največjo
vrednost 60 sekund� Zavrtite nastavitveni
regulator TIME
13
v nasprotni smeri urinega
kazalca in trajanje osvetlitve bo nastavljeno
na najmanjšo vrednost 10 sekund.
Nastavitev svetlosti okolice
Z nastavitvenim regulatorjem LUX
12
(glejte
sl. E) lahko nastavite »odziv« senzorja mraka
na svetlost okolice (oz. občutljivost na mrak).
Če zavrtite nastavitveni regulator v smeri
urinega kazalca, sveti reektor pri največji
svetlosti okolice 50�000 luksov�
Če zavrtite nastavitveni regulator LUX
12
v
nasprotni smeri urinega kazalca, sveti
reektor pri najmanjši svetlosti okolice 5
luksov�
Nastavitev območja zaznavanja
Zavrtite nastavitveni regulator SENS
14
(glejte sl� E) v smeri urinega kazalca in
območje zaznavanja detektorja gibanja bo
nastavljeno na največjo vrednost 8 metrov.
Detektor gibanja sedaj vklopi reektor šele
po 8 metrih� Zavrtite nastavitveni regulator
SENS
14
v nasprotni smeri urinega kazalca
in območje zaznavanja bo nastavljeno na
najmanjšo vrednost 1 metra. Detektor
gibanja 9 se vklopi že pri 1 metru, reektor
pa sveti�
zOdstranjevanje napak
= Napaka
= Vzrok
= Rešitev
= LED solarni reektor se ne vklopi.
=LED solarni reektor je izklopljen.
= Za vklop LED solarnega reektorja
pritisnite stikalo za VKLOP/IZKLOP/
SAMOD� (I/0/II)�
= Luč utripa.
= Akumulatorska baterija je skoraj
prazna�
= Baterijo napolnite (glejte poglavje
"Polnjenje baterije")�
zČiščenje in shranjevanje
V primeru neuporabe, shranjevanja in/ali
čiščenja reektor
11
izklopite�
Redno pregledujte detektor gibanja 9in
solarni panel 1glede umazanije�
Odstranite jo, da zagotovite pravilno
delovanje reektorja.
Izdelek, še zlasti solarni panel, pozimi
hranite brez snega in zmrzali�
Reektor očistite z rahlo vlažno krpo, ki ne
pušča vlaken, in blagim čistilnim sredstvom.

20 SI
zOdstranjevanje med
odpadke
Pri razvrščanju odpadkov
upoštevajte označevanje
embalažnih materialov, ki so
označeni s kraticami (a) in
številkami (b) in imajo naslednji
pomen:
1–7: Umetne snovi
20 – 22: Papir in karton
80 – 98: Kompozitni materiali�
Za možnosti odstranjevanja se
lahko obrnete na vašo občinsko ali
mestno upravo�
Zaradi varovanja okolja, izdelka, ko
je odslužil, ne odlagajte kot
gospodinjski odpadek, temveč ga
odstranite strokovno� Glede
informacij o zbirnih mestih in
njihovem delovnem času se lahko
obrnete na lokalno upravo�
Okvarjene ali izrabljene akumulatorske
baterije je treba reciklirati v skladu z
Direktivo 2006/66/ES in njenimi
spremembami� Akumulatorske baterije in/ali
izdelek vrnite prek ponujenih zbiralnih mest�
Okoljska škoda zaradi
nepravilnega odlaganja
akumulatorskih bater!
Akumulatorskih baterij ne smete odvreči med
gospodinjske odpadke� Lahko vsebuje
strupene težke kovine*) in so predmet
ravnanja z nevarnimi odpadki� Baterije in
akumulatorje, ki niso trdno nameščeni v
napravi, je treba pred odstranjevanjem
odstraniti in zavreči ločeno. Baterije in
akumulatorske baterije oddajte le v
izpraznjenem stanju! Če je mogoče,
uporabite akumulatorske namesto baterij za
enkratno uporabo�
*) označene z: Cd = kadmij,
Hg = živo srebro, Pb = svinec
zGaranca
Spoštovana stranka,
za to napravo dobite 3-letno garancijo, ki
začne teči z datumom nakupa. V primeru
okvare tega izdelka, so vam na voljo
zakonske pravice proti prodajalcu izdelka�
Te zakonske pravice niso omejene s spodaj
navedeno garancijo�
Garancski pogoji
Rok garancije se začne z datumom nakupa.
Prosimo, da originalni blagajniški račun
dobro shranite� Ta je potreben kot dokazilo
o nakupu. Če pride do napake v materialu
ali izdelavi tega izdelka v treh letih od
datuma nakupa, bomo izdelek, po naši
presoji, brezplačno popravili ali zamenjali.
Ta garancija predpostavlja, da je treba v
roku triletnega garancijskega obdobja,
predložiti okvarjeno napravo in potrdilo o
nakupu (blagajniški prejemek) ter kratek opis
napake in kdaj je napaka nastopila. Če
garancija napako krije, bomo izdelek
popravili ali zamenjali za novega� S
popravilom ali zamenjavo izdelka ne prične
teči nov garancijski rok.
Garancsko obdobje in zakonski
zahtevki za napake
Garancijski rok se zaradi garancijskega
zahtevka ne podaljša. To velja tudi za
zamenjane in popravljene dele. Poškodbe in
pomanjkljivosti, ki so morda prisotne že ob
nakupu, je treba sporočiti takoj po
razpakiranju� Popravila, izvedena po poteku
garancijskega roka, so plačljiva.
Obseg garance
Naprava je bila skrbno izdelana v skladu s
strogimi smernicami za kakovost in pred
dobavo natančno preizkušena. Garancija
velja za materialne ali proizvodne napake�
Ta garancija ne pokriva delov izdelka, ki so
predmet običajne obrabe in se jih zato šteje
za obrabne dele in za poškodbe občutljivih