Living Spaces MATEO User manual

MAS90: 5043-43300
MIRROR KIT
QTY: DESCRIPTION:
4
8 X 1-1/4 PH PAN ZINC
7030-00271 KIT
48 X 2-1/2 PH PAN ZINC
MATEO MIRROR

MATEO MIRROR 7030-00271
_____________________________________________________________________
PARTS LIST:
A) 1 - Mirror
B) 2 –Mirror Supports
C) 4– 1 1/4" Screws
D) 4 - 2 1/2" Screws
TOOLS REQUIRED:
1) Phillips Head Screwdriver
ASSEMBLY INSTRUCTIONS:
NOTE:
1)Hold the mirror (A) up on the back edge of the dresser top and center it before attaching the mirror
supports (B).
2) With the mirror still centered on the dresser, line up the mirror supports in between the outside edge of
the mirror and the strips on the back of the mirror. As shown in exhibit A.
3) Once lined up, attach the mirror supports to the dresser using the 2 1/2" screws (D) through the bottom
two holes on the mirror supports. Make sure that the thick part of the mirror support is pressed firmly up
against the bottom of the dresser top before inserting screws.
4) Attach the mirror to the supports using the 1 1/4" screws (C) in the top two holes on the mirror supports.
Make sure you have all parts before beginning assembly. If you need a part, contact Living Spaces.
Note: The length of screws to attach is important, but the style is not. Most any screw will work, so long as it's the proper length.
Press up
against the
bottom of
the dresser
top
1 1/4" screws go
into top 2 holes
2 1/2" screws go
into bottom 2 holes
Exhibit A