
User manual
5
BEFORE USING FOR THE FIRST TIME
Carefully unpack t e cotton candy maker and remove all packaging materials
Before using your cotton candy maker for t e first time, wipe down t e main unit, t e extractor ead, t e
rim and bowl wit a non-abrasive clot or sponge to clean any dust or loose materials.
For optimum results, be sure to turn unit ON and allow it to run for at least 3-5 minutes before starting.
This allows the unit to properly warm up before beginning to actually spin the cotton candy. Only add
sugar to t e extractor ead w en it as come to complete s op. Never use ingredients ot er t an pure
granulated sugar. T is will cause clogging. DO NOT overfill t e sugar receptacle.
1. First, find a stable surface near an electrical outlet before starting. Make sure t e cord is away from any
water source.
2. Plug in unit at t e OFF position.
3. Turn unit to ON position and allow to run for at least 3-5 minutes. T is will allow it to warm up.
4. T en stop t e extractor ead and to put t e sugar.
Measure level tablespoon of sugar wit measuring spoon. Pour sugar into centre receptacle. Switc to
ON position.
Note: to realise one cotton candy, pour 1 spoon of sugar (16g).
Do not pour more t an 20g of sugar per session.
Never pour sugar when the appliance is running.
5. Your cotton candy maker will spin t e sugar into a flossy sweet treat t at you will collect on t e wooden
stick by olding t e stick orizontally and spinning it as it circles t e bowl.
6. Turn t e unit OFF w en all t e sugar as been dispensed. Once t e extractor ead as come to a
complete stop, you can pour anot er measure of sugar in t e extractor ead and repeat above steps.
T e cotton candy s ould be flowing more quickly as t e unit s ould be sufficiently warmed up.