Logic L55B User manual

QUICK GUIDE | GUÍA RÁPIDA
L55B
Thank you for purchasing this innovative
LOGIC device. The specifications in this
document are subject to change without
prior notice.
LOGIC and the LOGIC logo are registered
trademarks of Swagtek, Inc. Other
trademarks are the property of their
respective owners.
Install SIM cards / memory card.
Get to know your Logic phone
Connect your Logic phone to the computer
using the USB cable.
Copy music files from your computer to your
Logic phone.
Charge for 24 hours before using.
VOLUME +/-
POWER /
LOCK KEY
AUDIO JACK
3.5 MM MICRO USB
PORT
CAMERA
5.45” TOUCHSCREEN
OPEN SIZE WITH BLEED: 100mm X 270mm
CLOSE FINISHED SIZE: 67.5mm X 100mm
1
2
3
4
5.45” 4G SMARTPHONE
SIM
cards
Micro SD
card
logicmobility.com
Copyright Swagtek, Inc. 2020
Made in China
Warranty Certificate
Terms and Conditions
LOGIC warrants that their Products will be free from defects in material and workmanship.
The warranty period is one (1) year for the products and three (3) months for the accessories
which are part of the original package including the battery. The warranty period begins the
date of purchase by the End-User who shall present an invoice or a purchase receipt when
requiring warranty service otherwise the warranty period will begin from the date of
manufacture of the product. LOGIC will repair a product without cost to the customer if it
presents a manufacturing defect or defect in workmanship during the warranty period and if
the defect occurred under normal conditions of use in accordance with the instructions and
specifications stated in the user’s manual.
For additional information about the terms and conditions of LOGIC‘s Limited Warranty or to
obtain warranty service information, please visit the support section at: logicmobility.com
Certificado do Garantía
Términos y Condiciones
LOGIC garantiza que sus productos estarán libres de defectos de materia prima y
ensamblaje. El período de garantía es de un (1) año para los productos y de tres (3) meses
para Ios accesorios que forman parte del paquete original incluyendo la batería. El usuario
final deberá presentar una factura o un recibo de compra cuando exija el servicio de
garantía, de lo contrario el período de garantía comenzará a partir de la fecha de fabricación
del producto. LOGIC reparará un producto, sin costo para el cliente si presenta un defecto de
fabricación o un defecto de ensamblaje durante el período de garantía y si el defecto se
produjo en condiciones normales de uso de acuerdo con las instrucciones y especificaciones
indicadas en el manual del usuario.
Para más detalles de la Garantía Limitada de LOGIC y para obtener información del servicio
de garantía, por favor visite la sección de soporte en nuestro sitio web: logicmobilitycom.
.
Conecte su teléfono Logic a una
computadora utilizando el cable USB.
Transfiera sus archivos de música desde su
computadora a su teléfono Logic.
Instalar tarjetas SIM / tarjeta de memoria.
Conozca su teléfono Logic.
Gracias por haber adquirido este
innovador producto de LOGIC. Las
especificaciones en este manual están
sujetas a cambios sin previo aviso.
LOGIC y el logotipo de LOGIC son marcas
registradas de Swagtek, Inc. El resto de las
marcas comerciales son propiedad de sus
respectivos dueños.
Cargue por 24 horas antes de usar.
tarjetas
SIM
Tarjeta
Micro
SD
VOLUMEN +/-
ENCENDER /
BLOQUEAR
ENTRADA DE
AUDIO 3.5 MM
PUERTO
MICRO USB
CÁMARA
PANTALLA
TÁCTIL DE 5.45”
NOTES（技术要求）：
Yukangda/Jiahui
0750-S5542T00-00
风琴折
80g书纸
说明书 2020.5.18
TITLE DESIGN Xieting DATE
DATE
DATE
CHECK
APPD
PART NO. CUSTOMER
ORDER NO.
MATERIAL
REMARKS
VENDOR
1. 展开尺寸: 270x100mm，公差(Tolerance): ±1mm
2. 成品无爆角、爆色，无拖花、无折角、无折皱、无歪斜
3. 原材料及后处理工艺均能满足ROHS和WEEE的要求.
(Raw materials and the corresponding post processing
should meet requirements defined in the ROHS and WEEE.)

FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure
to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The
exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use
only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power
output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the
limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use
at the ear is0.290W/Kgand when worn on the body, as described in this user guide, is0.787W/Kg(Body-worn measurements differ
among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is
1.528W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the
government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported
SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on
FCC ID: O55551420 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications
Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety
to give additional protection for the public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance
of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters,
and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved