Logitech Ultrathin iK1060 User manual

Setup Guide | 设置指南
Ultrathin
Magnetic clip-on keyboard cover
For iPad Air
iK1060 磁力夹式超薄键盘盖
适用于 iPad Air

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
2
Contents / 目录
English. . . . . . . . . . . . . . . . . . 3 简体中文 . . . . . . . . . . . . . . . . 12
www.logitech.com/support/ultrathin-air

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
3 English
Know your product
PDF
www.logitech.com/support/ultrathin-air
1 2
43
620-005824.002
5
UltraThin
Magnetic clip-on keyboard cover
For iPad Air™
®
51
2
6
7
8
9
10
4
3
1. Protective cover
2. iPad® holder
3. Hot keys
4. Keyboard
5. Bluetooth® and battery status light
6. Bluetooth connect button
7. Micro-USB charging port
8. On/o switch
9. Documentation
10. Micro-USB charging cable
English

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
4 English
Set up your product
ON
®
50°-70°
®
UltraThin for Air
1. Place your iPad into the slot in the
Keyboard Cover.
2. Turn on the Keyboard Cover:
• Bluetooth discovery starts
automatically and continues
for 15 minutes. The Status light
blinks blue.
• If the Status light briefly
turns red, charge the batteries.
For more information,
see “Charge the batteries.”
3. Establish Bluetooth connection:
• Make sure your iPad’s Bluetooth
feature is on. Select Settings >
Bluetooth > On.
• Select “Ultrathin for Air” on your
iPad’s Devices menu. Bluetooth
connection completed.
4. Tilt your iPad to suit your viewing angle.
Multiple angles are available to select,
from 50° to 70°.
Note:
• You will need to apply downward pressure
when you tilt your iPad.
• The maximum weight that can be loaded
onto the slot is 5kg.

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
5 English
Charge the batteries
USB
1. Plug one end of the micro-USB cable into
the charging port, and the other end into
a USB port on your computer.
Alternatively you can use a USB charger,
such as that provided with your iPad,
providing the power output rating is 5V
and at least 500mA.
The status light blinks green as the
battery charges.
2. Charge the batteries until the Status light
turns solid green.
Battery information:
• A fully charged battery provides about
3 months of power when the Keyboard
Cover is used about two hours a day.
• Charge the batteries when the Status
light briefly turns red after the Keyboard
Cover turns on.
• When not in use, turn o the Keyboard
Cover to conserve battery power.
• The Keyboard Cover enters sleep mode
if powered on and not used. To exit
sleep mode, press any key.

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
6 English
Hot keys
Home = iPad Home screen
Switch applications
Siri®
Use your voice to send messages,
make calls, schedule meetings,
and more
Search
Use your voice to send messages,
make calls, schedule meetings,
and more
Switch language
Switches the keyboard language
Virtual keyboard
Shows/hides the virtual keyboard
Screen Shot
Previous track
Play/Pause
Next track
Mute
Volume down
Volume up
Lock screen
Locks or unlocks the iPad screen
Function keys
Fn + X = Cut
Fn + C = Copy
Fn + V = Paste
Fn + Left cursor = Select left
Selects text on the left,
word by word
Fn + Right cursor = Select right
Selects text on the right,
word by word
Note:
• To select a function key, press and hold the Fn key, and then press the key indicated above.

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
7 English
Use your product
Status light indications
Light Description
Blinking green The battery is charging.
Solid green The battery is fully charged
(100%).
Red Battery power is low (less than
20%). Recharge the battery.
Blinking blue Fast: The keyboard cover is in
discovery mode, ready for pairing.
Slow: The keyboard cover is trying
to reconnect to your iPad.
Solid blue Bluetooth pairing or reconnection
is successful.
Connecting to a dierent iPad
®
1. Place the new iPad into the slot
in the Keyboard Cover.
2. Make sure the Keyboard Cover
is turned on.
3. Check that your iPad’s Bluetooth
feature is on. Select Settings >
Bluetooth > On.
4. Press the Bluetooth Connect
Button on the Keyboard Cover.
The Keyboard Cover is
discoverable for 3 minutes.
5. Select “Ultrathin for Air” on
the iPad’s Devices menu.
Bluetooth connection completed.

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
8 English
Detaching your iPad
1. Pull back: Tilt your iPad backwards
until it is vertical:
50°-70°
2. Push down: Apply downward pressure
to ensure that the slot is completely flat:
3. Lift iPad: Lift your iPad out of the
Keyboard Cover vertically:

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
9 English
Storing your iPad for travel
1. Slide your iPad towards the hinge at the
back of the Keyboard Cover. As your iPad
gets close to the rear hinge, it pops up:
10°-40°
2. Attach your iPad to the rear hinge:
3. Lower your iPad down on to the
Keyboard Cover until it closes.
A magnetic clip holds the iPad
in position:
Note:
• DO NOT try to slide your iPad into the hinge
from the opposite direction:

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
10 English
Battery disposal at product end of life
1. Pry o top cover of keyboard
with screwdriver.
2. Detach battery from circuit board
and remove battery.
3. Dispose of your product and its battery
according to local laws.
1 2 3

Ultrathin - Magnetic clip-on keyboard cover - For iPad Air
11 English
Troubleshooting
The Keyboard Cover does not work
• Press any key to wake the Keyboard
Cover from sleep mode.
• Turn the Keyboard Cover O and then
back On.
• Recharge the internal batteries.
For more information, refer to
“Charge the batteries.”
• Re-establish the Bluetooth connection
between the Keyboard Cover and iPad:
• Verify that your iPad’s Bluetooth
feature is turned on.
• Choose “Ultrathin for Air” from the
Devices menu on your iPad. The
Status light briefly turns blue after
the Bluetooth connection is made.
My iPad doesn’t fit into the slot
• Make sure you are inserting your iPad on
its side into the slot. The Keyboard Cover
doesn’t support portrait mode.
Visit Product Central
There’s more information and support
online for your product. Take a moment
to visit Product Central to learn more about
your new Keyboard Cover.
Browse online articles for setup help,
usage tips, or information about
additional features.
Connect with other users in our Community
Forums to get advice, ask questions,
and share solutions.
At Product Central, you’ll find a wide
selection of content:
• Tutorials
• Troubleshooting
• Support community
• Software downloads
• Online documentation
• Warranty information
• Spare parts (when available)
Go to:
www.logitech.com/support/ultrathin-air
What do you think?
Thank you for purchasing our product.
Please take a minute to tell us what you think of it.
www.logitech.com/ithink

12 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
了解您的产品
PDF
www.logitech.com/support/ultrathin-air
1 2
43
620-005824.002
5
UltraThin
Magnetic clip-on keyboard cover
For iPad Air™
®
51
2
6
7
8
9
10
4
3
1. 保护盖
2. iPad 支架
3. 热键
4. 键盘
5. 蓝牙® 和电池状态指示灯
6. 蓝牙连接按钮
7. 微型 USB 充电端口
8. 开启/关闭开关
9. 文档
10. 微型 USB 充电连接线

13 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
设置您的产品
ON
®
50°-70°
®
UltraThin for Air
1. 将 iPad 插入键盘盖的插槽中。
2. 打开键盘盖：
• 蓝牙搜索功能自动开启，将持续
15 分钟。状态指示灯将闪烁蓝灯。
• 如果状态指示灯短暂变为红灯，请为
电池充电。有关详细信息，请参见
“为电池充电”。
3. 建立蓝牙连接：
• 确保 iPad 的蓝牙功能已开启。 依次
选择：“设置” > “蓝牙” > “开启”。
• 在 iPad 的“设备”菜单上选
择“Ultrathin for Air”。 蓝牙连
接完成。
4. 调整 iPad 至适合观看的角度。可调角
度范围：50° 至 70°。
请注意：
• 转动 iPad 时，您需要向下按压。
• 插槽可承受的最大重量为 5kg。

14 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
为电池充电
USB
1. 将微型 USB 连接线的一端插入充
电端口，将另一端插入电脑上的
USB 端口。
或者，您也可以使用 USB 充电器
(如 iPad 随附的充电器) 进行充电，
前提是电源输出功率为 5V 和至少
500mA。
电池充电过程中，状态指示灯将闪
烁绿灯。
2. 为电池充电，直到状态指示灯变为稳定
的绿灯为止。
电池信息:
• 电池充满电之后，如果键盘盖每天使用
约两个小时，则电量可以维持三个月。
• 如果打开键盘盖之后，状态指示灯短暂
亮起红灯，请为电池充电。
• 不使用时，请关闭键盘盖，节省电
池电量。
• 如果键盘盖处于开启状态而未使用，
则会进入休眠模式。按任意键退出休
眠模式。

15 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
热键
Home = iPad 主屏幕
切换应用程序
Siri®
通过语音发送消息、拨打电话、
安排会议等
搜索
启动 iPad 的搜索功能
切换语言
切换键盘语言
虚拟键盘
显示或隐藏虚拟键盘
截屏
上一曲目
播放/暂停
下一曲目
静音
调低音量
调高音量
锁屏
锁定或解锁 iPad 屏幕
功能键
Fn + X = 剪切
Fn + C = 复制
Fn + V = 粘贴
Fn + 左光标 = 选择左侧内容
逐字选择左侧文本
Fn + 右光标 = 选择右侧内容
逐字选择右侧文本
注意：
• 要选择功能键，请按住 Fn 键，然后按上方显示的键。

16 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
使用您的产品
状态指示灯
指示灯 说明
闪烁绿灯 电池正在充电。
稳定绿灯 电池已充满 (100%)。
红灯 电量不足 (＜20%)。为电池充电。
闪烁蓝灯 快速闪烁: 键盘盖处于可被搜索状态,
已准备好可以进行配对。
缓慢: 键盘盖正在尝试重新连接 iPad。
稳定蓝灯 蓝牙配对或重新连接成功。
连接另一个 iPad
®
1. 将新的 iPad 插入键盘盖的插槽中。
2. 确保键盘盖处于开启状态。
3. 检查并确保 iPad 的蓝牙功能已开启。
依次选择：设置 > 蓝牙 > 开启。
4. 按下蓝牙连接按钮。键盘盖在 3 分钟内
将处于可被搜索状态。
5. 在 iPad 的“设备”菜单上选择
“Ultrathin for Air”。蓝牙连接完成。

17 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
卸下 iPad
1. 将 iPad 拉回：向后转动 iPad 直到其呈
竖直角度：
50°-70°
2. 向下按压：向下按压 iPad，确保插槽处
的平整：
3. 提起 iPad：将 iPad 从键盘盖中垂
直提起：

18 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
旅行时收纳 iPad
1. 将 iPad 滑向键盘盖后部的转轴。
当 iPad 靠近后部转轴时，转轴会弹出：
10°-40°
2. 将 iPad 固定到后部转轴上：
3. 将 iPad 向下贴近键盘盖直至闭合。
磁力夹将把 iPad 固定到位：
请注意：
• 请勿将 iPad 从相反方向滑入转轴：

19 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
电池废弃处置
1 2 3
1. 用螺丝刀撬开键盘的顶盖。
2. 从电路板上分离电池，取出电池。
3. 根据当地法律对产品和电池进行弃置。

20 简体中文
iK1060 磁力夹式超薄键盘盖 - 适用于 iPad Air
疑难解答
键盘盖不工作
• 按任意键即可将键盘盖从休眠模式
中唤醒。
• 将键盘盖关闭，然后再将其重新开启。
• 为内置电池充电。有关详细信息，
请参见“为电池充电”。
• 在键盘盖与 iPad 之间重新建
立蓝牙连接：
• 确保 iPad 的蓝牙功能已开启。
• 在 iPad 的“设备”菜单上
选择“Ultrathin for Air”。蓝牙连接
成功后，状态指示灯短暂变为蓝灯。
我的 iPad 无法插入插槽
• 请确保您是将 iPad 的横边插入插槽。
键盘盖不支持纵向模式。
访问“产品中心”
我们的网站提供有关于本产品的详细信息
和支持服务。请抽时间访问“产品中心”，
了解关于新键盘盖的更多信息。
浏览在线文章，查看设置帮助、使用技巧或
关于更多功能的信息。
通过“社区论坛”与其他用户交流，获得
建议，提出问题，分享解决方法。
“产品中心”提供了广泛的内容选择：
• 教程
• 疑难解答
• 支持社区
• 软件下载
• 在线文档
• 保修信息
• 备用部件（若有供应）
访问：
www.logitech.com/support/ultrathin-air
您对本产品有何感想？
欢迎拨冗告知我们。
感谢您购买罗技产品。
www.logitech.com/ithink