Logitech Ultrathin User manual

Setup Guide
UltraThin
Magnetic clip-on keyboard cover
For iPad Air

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
2
Contents
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
www.logitech.com/support/ultrathin-air

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
3 English
Know your product
PDF
www.logitech.com/support/ultrathin-air
1 2
43
620-005824.002
5
UltraThin
Magnetic clip-on keyboard cover
For iPad Air
®
51
2
6
7
8
9
10
4
3
1. Protective cover
2. iPad holder
3. Hot keys
4. Keyboard
5. Bluetooth® and battery status light
6. Bluetooth connect button
7. Micro-USB charging port
8. On/o switch
9. Documentation
10. Micro-USB charging cable

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
4 English
Set up your product
ON
®
50°-70°
®
UltraThin for Air
1. Place your iPad into the slot in the
Keyboard Cover.
2. Turn on the Keyboard Cover:
• Bluetooth discovery starts
automatically and continues
for 15 minutes. The Status light
blinks blue.
• If the Status light briefly
turns red, charge the batteries.
For more information,
see “Charge the batteries.”
3. Establish Bluetooth connection:
• Make sure your iPad’s Bluetooth
feature is on. Select Settings >
Bluetooth > On.
• Select “UltraThin for Air” on your
iPad’s Devices menu. Bluetooth
connection completed.
4. Tilt your iPad to suit your viewing angle.
Multiple angles are available to select,
from 50° to 70°.
Note:
• You will need to apply downward pressure
when you tilt your iPad.
• The maximum weight that can be loaded
onto the slot is 5kg.

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
5 English
Charge the batteries
USB
1. Plug one end of the micro-USB cable into
the charging port, and the other end into
a USB port on your computer.
Alternatively you can use a USB charger,
such as that provided with your iPad,
providing the power output rating is 5V
and at least 500mA.
The status light blinks green as the
battery charges.
2. Charge the batteries until the Status light
turns solid green.
Battery information:
• A fully charged battery provides about
3 months of power when the Keyboard
Cover is used about two hours a day.
• Charge the batteries when the Status
light briefly turns red after the Keyboard
Cover turns on.
• When not in use, turn o the Keyboard
Cover to conserve battery power.
• The Keyboard Cover enters sleep mode
if powered on and not used. To exit
sleep mode, press any key.

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
6 English
Hot keys
Home = iPad Home screen
Switch applications
Siri
Use your voice to send messages,
make calls, schedule meetings,
and more
Search
Use your voice to send messages,
make calls, schedule meetings,
and more
Switch language
Switches the keyboard language
Virtual keyboard
Shows/hides the virtual keyboard
Screen Shot
Previous track
Play/Pause
Next track
Mute
Volume down
Volume up
Lock screen
Locks or unlocks the iPad screen
Function keys
Fn + X = Cut
Fn + C = Copy
Fn + V = Paste
Fn + Left cursor = Select left
Selects text on the left,
word by word
Fn + Right cursor = Select right
Selects text on the right,
word by word
Note:
• To select a function key, press and hold the Fn key, and then press the key indicated above.

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
7 English
Use your product
Status light indications
Light Description
Blinking green The battery is charging.
Solid green The battery is fully charged
(100%).
Red Battery power is low (less than
20%). Recharge the battery.
Blinking blue Fast: The keyboard cover is in
discovery mode, ready for pairing.
Slow: The keyboard cover is trying
to reconnect to your iPad.
Solid blue Bluetooth pairing or reconnection
is successful.
Connecting to a dierent iPad
®
1. Place the new iPad into the slot
in the Keyboard Cover.
2. Make sure the Keyboard Cover
is turned on.
3. Check that your iPad’s Bluetooth
feature is on. Select Settings >
Bluetooth > On.
4. Press the Bluetooth Connect
Button on the Keyboard Cover.
The Keyboard Cover is
discoverable for 3 minutes.
5. Select “UltraThin for Air” on
the iPad’s Devices menu.
Bluetooth connection completed.

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
8 English
Detaching your iPad
1. Pull back: Tilt your iPad backwards
until it is vertical:
50°-70°
2. Push down: Apply downward pressure
to ensure that the slot is completely flat:
3. Lift iPad: Lift your iPad out of the
Keyboard Cover vertically:

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
9 English
Storing your iPad for travel
1. Slide your iPad towards the hinge at the
back of the Keyboard Cover. As your iPad
gets close to the rear hinge, it pops up:
10°-40°
2. Attach your iPad to the rear hinge:
3. Lower your iPad down on to the
Keyboard Cover until it closes.
A magnetic clip holds the iPad
in position:
Note:
• DO NOT try to slide your iPad into the hinge
from the opposite direction:

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
10 English
Battery disposal at product end of life
1. Pry o top cover of keyboard
with screwdriver.
2. Detach battery from circuit board
and remove battery.
3. Dispose of your product and its battery
according to local laws.
1 2 3

UltraThin - Magnetic clip-on keyboard cover - For iPad Air
11 English
Troubleshooting
The Keyboard Cover does not work
• Press any key to wake the Keyboard
Cover from sleep mode.
• Turn the Keyboard Cover O and then
back On.
• Recharge the internal batteries.
For more information, refer to
“Charge the batteries.”
• Re-establish the Bluetooth connection
between the Keyboard Cover and iPad:
•Verify that your iPad’s Bluetooth
feature is turned on.
•Choose “UltraThin for Air” from the
Devices menu on your iPad. The
Status light briefly turns blue after
the Bluetooth connection is made.
My iPad doesn’t fit into the slot
• Make sure you are inserting your iPad on
its side into the slot. The Keyboard Cover
doesn’t support portrait mode.
Visit Product Central
There’s more information and support
online for your product. Take a moment
to visit Product Central to learn more about
your new Keyboard Cover.
Browse online articles for setup help,
usage tips, or information about
additional features.
Connect with other users in our Community
Forums to get advice, ask questions,
and share solutions.
At Product Central, you’ll find a wide
selection of content:
• Tutorials
• Troubleshooting
• Support community
• Software downloads
• Online documentation
• Warranty information
• Spare parts (when available)
Go to:
www.logitech.com/support/ultrathin-air

© 2014 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech
andmaybe registered. Apple, iPad, iPad Air and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.
Bluetoothisa registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective owners.
Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject
tochange without notice.
621-000273.003
www.logitech.com
www.logitech.com/support/ultrathin-air