Logitech BRIO 505 User manual

BRIO 505
Setup Guide
Setup Guide

CONTENTS
English . . . . . . . . . . . . . . . . . 3
Français . . . . . . . . . . . . . . . . 10
Español. . . . . . . . . . . . . . . . .17
Português . . . . . . . . . . . . . . .24

KNOW YOUR PRODUCT
BRIO 505 FRONT VIEW WITH
FUNCTION INDICATIONS
MOUNT DESIGN OVERVIEW
Privacy shutter dial
¼-20 adaptor for
3rd party mounts
Attached
USB-C cable
Rear adjustment
hinge for monitor
sizing
Removable mount
adaptor
LED activity light
Magnetic mount
receiver
Padded foot
Micro-suction pad
protective lm
(Remove before
setting up mount)
Tilt adjustment
hinge
Brio 505 webcam
Privacy shutter
Magnetic thread
mount screw
(Removable)
Ultrawide-angle
lens with 90° dFOV
Dual noise
reduction
microphones
Micro-suction pad
Micro-suction pad allows the mount to
stay securely attached to your monitor.
This removable pad leaves no residue
and can be cleaned with water.
3English

STEP 1: WHAT’S IN THE BOX
1. Webcam with attached
USB-C cable
2. Mount clip with removable
mount adaptor
3. User documentation
STEP 2: DETERMINE MOUNT PLACEMENT
Placement to allow one-handed camera
adjustments (using micro-suction pad)
1. Determine the best placement for your
webcam before continuing.
2. Wipe the back of your monitor to clear
any dust or dirt.
USB-C
3. Remove the protective lm from the
micro-suction pad.
Note:
– The mount adaptor can be removed and reused
for mounting adjustments without leaving residue.
– To clean the micro-suction pad, rinse with water
to remove debris, and let it air dry in order to
regain strong suction.
4. Open the mount fully and place
on top of your monitor, being sure
that the pad of the front clip makes
contact with the front of the monitor.
5. Rotate the rear foot down until it
makes contact with the back of the
monitor.
6. Press the micro-suction pad to the
back of your monitor rmly to create
a good bond.
4English

STEP 4: ATTACH CAMERA TO THE MOUNT
Place the webcam into the magnet
attachment point on top of the mount.
Listen for an audible click indicating the
webcam is properly seated on the mount.
(Optional) Placement without
the micro-suction pad
Slide the removable mount adapter
down to remove it from the webcam
foot. Adjust the foot on the mounting
clip until it is ush with the back of your
device and press rmly in place.
STEP 3: MOUNT ADAPTOR REMOVAL AND
CLEANING
1. Remove the webcam from mount and gently
peel the adaptor from one corner to remove.
2. With a wet nger gently rub the pad clear of
dust and dirt and let the micro-suction pad air
dry completely before remounting (do not use
cloth or tissue to dry).
3. Repeat the monitor placement setup steps to
best deploy your webcam.
5English

STEP 5: CONNECT THE WEBCAM VIA
USBC & GET STARTED
1. Plug the USB-C connector into the USB-C
port on your computer, monitor, laptop,
or docking station.
STEP 6: SUCCESSFUL CONNECTION
LED activity light will light up when the
webcam is in use by any video application.
LED activity lights:
• Video ON / Audio ON: White
• Video ON / Audio OFF: White
• Video OFF / Audio ON: Yellow
• Video OFF / Audio OFF: No light
• Firmware Update: Breathing Lilac
2. Rotate the dial on the right side of the
webcam to open/close the privacy shutter.
3. Adjust the webcam by turning side to side
and tilting up and down to nd the best
framing for your video meetings.
6English

STEP 7: SHOW MODE
Easily show physical items in video calls by
tilting the camera down to present sketches,
objects, and work in progress. There are two
ways to use Show Mode:
1. If mount is secured with micro-suction
pad: Using one hand, tilt the camera
down to show your desktop, and tilt back
up to show yourself.
2. If mount is not secured with micro-suction
pad: Hold the mount still with one hand and tilt
the camera up or down with the other.
7English

STEP 8: LOGI TUNE
Logi Tune helps boost your webcam
performance with periodic soware and
rmware updates.
It is recommended to update your webcam.
To do so, download Logi Tune from
www.logitech.com/tune
ADJUSTABLE OPTIONS
• Show Mode
• Auto-framing
• Zoom adjustment
• Field of View (90°/78°/65°)
• Image adjustment
• Auto-focus
• Disable mics
• LED on/o for video and audio
www.logitech.com/tune
Brio 505
CONNECTED
Show Mode
RightSight
Field of view 90°78°65°
Zoom
Image adjustments
Disable Show Mode
8English

STEP 9: OPTIONAL ATTACH TO A TRIPOD
For placement on a tripod (not included)
1. Rotate counterclockwise to remove
the mounting screw from the bottom of
the webcam.
2. Locate the ¼ inch tripod thread on the
bottom of the universal mounting clip.
3. Secure the webcam on your tripod by
twisting it into the ¼ inch thread.
4. Repeat the monitor placement setup
steps to best deploy your webcam.
5. Please refer to step 5 and 6 to complete
your webcam setup.
9English

DIMENSIONS
WEBCAM:
Height x Width x Depth:
1.2 in (31.5 mm) x 4.3 in (110 mm) x 1.2 in (31.5 mm)
Height x Width x Depth (incl. mount clip):
2 in (51.5 mm) x 4.3 in (110 mm) x 1.8 in (45 mm)
Weight: 4.2 oz (121 g), incl. mount clip & cable
Attached Cable length: 5  (1.5 m)
MOUNTING CLIP:
Height x Width x Depth:
1 in (25 mm) x 1.8 in (45.8 mm) x 2.6 in (65.1 mm)
Weight: 1.4 oz (40 g), incl. Removable mount adapter
© 2022 Logitech. Logitech, Logi and the Logitech logo are trademarks or registered trademarks of
Logitech Europe S.A. and/or its aliates in the U.S. and other countries. The Bluetooth® word mark
and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Logitech is under license. USB-C is a registered trademark of USB Implementers Forum. All other
trademarks are the property of their respective owners. Logitech assumes no responsibility for any
errors that may appear in this manual. Information contained herein is subject to change without
notice.
WEB-621-002245.00A
www.logitech.com/support/Brio505