LogTag UHADO-16 User manual

Version B
www.logtag-recorders.com
Quickstart Guide

What's Included 3
Downloading Analyzer 4
Configuring your UHADO-16 5
Starting your UHADO-16 6
During Recording 7
Downloading Data 8
Quickstart Guide Contents

Page 3
What’s Included
Please check you have each of the items
shown below before continuing with setting
up your UHADO-16.
UHADO-16
USB Cable
(Not included)
Note: The UHADO-16 can be used with
a Micro-USB cable or any of the LogTag
Interface Cradles
LTI Interface
(Not included)
Optional:

Page 4
Downloading LogTag Analyzer
To use the UHADO-16, you will need the latest
version of LogTag Analyzer. To download, open your
browser and navigate to:
https://logtagrecorders.com/software/LTA3/
1. Fill in the form with your details, then click ‘Go to
downloads page’
2. Click ‘Download Now’ to start the download
3. Click ‘Run’ or ‘Save File’ then double-click the
downloaded file to open the LogTag Analyzer Setup
Wizard
4. Follow the on-screen prompts to install LogTag
Analyzer
5. Click ‘Finish’ to exit the LogTag Analyzer Setup
Wizard
Warning: Please ensure no other LogTag software
is currently running on your computer before running
the Analyzer software.

Page 5
Configuring your UHADO-16
Connect your UHADO-16 to the
computer via the USB cable. The USB
socket on the device is located on the
bottom, protected by a rubber seal.
1. Open LogTag Analyzer
2. Click ‘Configure’ from the ‘LogTag’ menu or click the ‘Wizard’
icon
3. Adjust your logger configuration settings as required.
For more information on configuration settings, please refer to
Configuring UHADO-16 in the Product User Guide or press ‘F1’ for
help from your keyboard
4. Click ‘Configure’ to upload the configuration settings to the
logger
5. Click ‘Close’ to exit the configuration page
Alternatively, you can dock your UHADO-16 into any LogTag
interface cradle.
Alternatively, you can dock your UHAD
O
-16 into any Lo
g
Ta
g
interface cradle.

Page 6
Starting your UHADO-16
Press and hold the
START/Clear/Stop button.
STARTING will appear along
with READY.
Release the button once
READY disappears.
The UHADO-16 now records
temperature and humidity
data.
The Logger will not start if
you release the button before
READY disappears.
Clock
Recording State
Indicators
Display overview:
Temperature Temperature units
Humidity
Alarm
Markers
Battery Low Symbol
Alarm/OK Indicator

Page 7
During Recording
To view more information about clearing
alarms and resetting and reviewing trip
statistics, please refer to the Product User
Guide.
End of page

Page 8
Downloading Results
Connect your UHADO-16 to the
computer via the USB cable. The USB
socket on the device is located on the
bottom, protected by a rubber seal.
A new device drive will appear in file
explorer with the files containing the
recorded data.
By default, auto-download is enabled in LogTag
Analyzer so when you open the program, data
results will be displayed after connecting your
UHADO-16 to the computer.
1. Open LogTag Analyzer
2. Click ‘Download’ from the ‘LogTag’ menu or press F4
3. Click ‘Close’ to exit the download page
Alternatively, you can dock your UHADO-16 into any LogTag
interface cradle.
Alternatively, you can dock your UHAD
O
-16 into any Lo
g
Ta
g
interface cradle.