LogTag USRID-16 User manual

Version A
www.logtag-recorders.com
Quickstart Guide
°C
REC

What’s Included 3
Downloading LogTag Analyzer 4
Configuring your USRID-16 6
Starting your USRID-16 7
During Recording 8
Downloading Results 9
Quickstart Guide Contents

Page 3
What’s Included
Please check you have the item shown below before
continuing with setting up your USRID-16.
USRID-16
°C
REC

Page 4
Downloading LogTag
Analyzer
Warning: Please ensure no other LogTag software is
currently running on your computer before running the
Analyzer software.
To download the latest LogTag Analyzer, open your
browser and navigate to:
https://www.cik-solutions.com/datenlogger-monitoringsysteme/logtag-support/
1. Click ‘Go to downloads page’ to take you to the
download page.
2. Click ‘Download Now’ to start the download. You
can fill in your details beneath and click ‘subscribe’ if
you wish to receive email updates from us.
3. Click ‘Run’ or ‘Save File’ then double-click the
downloaded file to open the LogTag Analyzer Setup
Wizard.

Page 5
Downloading LogTag
Analyzer continued...
Note: If you already have the LogTag Analyzer
installed, please see whether you need to update
to the latest version by clicking ‘Check Internet for
updates’ from the ‘Help’ menu.
4. Follow the on-screen prompts to install LogTag
Analyzer.
5. Click ‘Finish’ to exit the LogTag Analyzer Setup
Wizard.

Page 6
Configuring your
USRID-16
Connect your USRID-16 to
the computer via the USB
port. The USB socket on
the device is located on the
bottom, protected by the cap.
1. Open LogTag Analyzer.
2. Click ‘Configure’ from the ‘LogTag’ menu or click
the ‘Wizard’ icon.
3. Adjust your logger configuration settings as
required. For more information on configuration
settings, please refer to Configuring USRID-16 in the
Product User Guide or press ‘F1’ for help from your
keyboard.
4. Click ‘Configure’ to upload the configuration
settings to the logger.
5. Click ‘Close’ to exit the configuration page.

Page 7
Starting your USRID-16
Press and hold the
START/MARK button.
REC symbol will appear.
Release the button once
REC stops flashing.
The USRID-16 now records
temperature data.
REC
READY
°C
REC
Display overview:
°F
°C
PAUSED
STOPPED
READY
DELAY
MIN MAX
REC
MARK
Recording
Indicators
Temperature
Recording
Indicators Temperature
units
Min/Max
Indicators
Battery Low
Symbol
Above/Below
Threshold Arrows
Alarm/OK
Indicator
Mark Indicator

Page 8
During Recording
To view more information about clearing alarms and
reviewing Min/Max trip temperatures, please refer to
the Product User Guide.
• END OF PAGE

Page 9
Downloading Results
By default, auto-download is enabled in LogTag
Analyzer so when you open the program, data results
will be displayed after connecting your USRID-16 to
the computer.
1. Open LogTag Analyzer.
2. Click ‘Download’ from the ‘LogTag’ menu or
press F4.
3. Click ‘Close’ to exit the download page.
Alternatively, you can download and view data on
LogTag Analyzer.
Alternativel
y
,
y
ou can download and view data on
L
og
T
ag
A
na
l
yzer
.
Connect your USRID-16 to the
computer via the USB port. The
USB socket on the device is
located on the bottom, protected
by the cap.
A new device drive will appear in file
explorer with the files containing the
recorded data.